Mi-one Mi-pod 2.0 User manual

User Manual

1
MI-POD 2.0
The Mi-pod 2.0 is a new revolutionary design
combining luxury materials and user-inspired
ergonomics. The slim profile uses a
high-density custom made 1200mAh built-in
battery for maximum battery life. The new
laser-cut mesh coil pods feature our patented
OAS system (Oil and Air Separated) with no
leaking, longer coil life and incredible flavor
production that is combined with the Mi-Pod
2.0’s ultra-sensitive airflow switch for both MTL
and DTL vaping. This beautiful device was
meticulously crafted to bring you an entirely
new and upgraded vaping experience that
enhances the entire sensory experience.
Additionally, the Mi-pod 2.0 comes with an auto
draw function, 4 stage power indicator LEDs,
an easy on/off switch and a micro-USB port, all
created to make it the most convenient to
charge, use and enjoy.
PLEASE READ THE USER MANUAL
CAREFULLY BEFORE USING.
SAVE THESE INSTRUCTIONS
Cover Chambered
Slot
Replaceable
Cartridge
Body
USB
Port
Airflow
ON/
OFF
Switch
LED
Power
Indicator
Lanyard
Slot

2
Power Mode: Full-Power Output
Maximum Current: 3.5A
Cartridge Resistance: 0.8 Ohm Mesh Coil
Battery: Built-in 1200 Square High-Drain
Lithium Battery
Pod Capacity: 2ML E-Liquid
Output Voltage: 3.1V - 3.7V
Power Display: 4 White LED Lights
Working Mode: Auto Switch & On/Off Button
Device Size: L45.6mm x W 13mm x 72.5mm
TECHNICAL SPECIFICATIONS
Compact size and big battery capacity
(1200mAh and 2mL E-Juice Capacity)
Replaceable Cartridge (Refillable)
Auto Switch & On/Off Button
Power Display: 4 White LED Lights
8 Seconds Cut Off
Short Circuit Protection
Low Voltage Protection
Overcharge protection
Over discharge protection
Low Resistance Protection
Over Heating Protection (PCBA Temperature)
MAIN FEATURES
HOW TO USE
1. E-Juice Filling: Take out the cartridge and
open the cover, inject directly into the
chambered slot and put the cover back.
2. Install: Put the filled cartridge into the Mi-pod
body properly, you will hear the pod lock in.
3. On/Off: Flip the on/off Switch up to turn on,
LED lights illuminate battery power level for
3 seconds. To turn off flip the on/off switch
down, no LED lights will illuminate.
4. Vaping: Start to inhale, the side power level
LED lights will slowly go on and off on each
inhale.

3
WORKING TIME
CHARGING
8 Second Cut Off: If inhaling more than 8
seconds, the Mi-pod 2.0 device will turn off.
Move the Auto Switch On/Off Button down, to
turn the device off. Turn it back on by flipping
the Auto Switch On/Off Button up, to reactivate
your Mi-Pod 2.0 Device.
REMOVE THE POD FROM THE MI-POD 2.0
DEVICE BEFORE CHARGING.
Simply charge the Mi-Pod 2.0 by connecting it
with a 1 AMP wall adapter via Micro-USB cable
supplied in kit. The white LED is lighting and
showing the current power status. During the
charging duration, the LED lights will change.
When the Mi-Pod 2.0 is charging, you will get
solid lights and flashing lights. 4 LED Flashes
mean voltage lower than 3.2V. The Bottom LED
is on, and the other 3 LED flash, means low
battery 3.2V-3.55V. The bottom 2 LED lights are
on, and top 2 LED lights are flashing, means
half battery 3.55-3.8V. The bottom 3 LED lights
are on and the Top 1 LED light flashes, the
battery is ¾ full 3.8-4.05V. 4 LED are on and
keeps lighting, the battery is above 4.05V.
When the Mi-Pod 2.0 is fully charged 4.15V, the
LED light will flash 8 times and will turn off. If
the Mi-pod 2.0 is fully charged when plugging in
to the wall charge the White 4 LED Light will
flash 8 times to indicate the Mi-pod 2.0 is fully
charged. ONLY CHARGE THE MI-POD 2.0
DEVICE WITH 1AMP WALL CHARGERS AND
THE SUPPLIED MICRO-USB CABLE.
INDOOR CHARGING ONLY.

4
LED INDICATORS
WHILE IN USE - LED POWER DISPLAY:
4 LED Lights On = 4.05-4.2V------Full Battery
3 LED Lights On = 3.8-4.05V -----3/4 Battery
2 LED Lights On = 3.55-3.8V -----Half Battery
1 LED Light On = 3.55-------------Low Battery
SAFETY PROT ECTION:
White LED Light Flashes 8 times:
------------- Low Voltage Protection
-----Over Using (Seconds Cut Off)
White LED Light Flashing 3Times:
------------- Short Circuit Protection
-------- Low Resistance Protection
White LED Light Flashes 5 times:
------------------------ Overtime Puffs
FULLY CHARGED:
All 4 LED Lights Flash 4 times and turns off:
---------------Fully charged Mi-pod 2.0 Device
PLEASE READ THE USER MANUAL
CAREFULLY BEFORE USING:
1. This product is not intended for persons
under the age of 21 years, non-smokers,
pregnant or breast-feeding women, persons
at risk of heart disease, persona with
hypertension and diabetes, or anyone
taking medication for depression or
asthma, persons who are sensitive to
nicotine.
2. This product contains small parts, please
keep out of reach of children and pets.
3. Keep away from high temperature or moist
and excessively cold environments.
IMPORTANT
SAFEGUARDS

5
IMPORTANT SAFEGUARDS CONTINUED:
4. Please dispose properly.
5. This product is not a smoking cessation
device.
CAUTIONS -
IMPORTANT
SAFEGUARDS
1. If using this device with e-liquids containing
nicotine, always read the safety instructions
from the e-liquid manufacturer that
accompany the e-liquids.
2. Nicotine is an addictive chemical. Do not
use nicotine containing liquids if you are
pregnant or breastfeeding. Avoid e-liquid
with nicotine coming in contact with skin.
Should nicotine containing e-liquid come in
contact with skin, wash affected area
immediately.
3. If at any time you are feeling ill from
exposure to liquid nicotine or from using
this product in conjunction with nicotine
containing e-liquids, discontinue use and
call the Poison Control Center at
800-222-1222.
CAUTIONS -
IMPORTANT
SAFEGUARDS
1. Please turn off the device when it is not in
use.
2. Do Not leave the charging device
unattended.
3. Do not drop, throw or abuse your device,
which may cause damage.
4. Please use the USB charger your device
came with properly charging with 1AMP
wall charger.

6
CAUTIONS - IMPORTANT SAFEGUARDS
CONTINUED:
5. Keep away from water and any flammable
gas or liquid.
6. Do not expose the device to direct sunlight,
dust, moisture or mechanical shock.
7. Do not expose the device to extreme
temperature. (Recommended temperature
range: -10~60OC/14~140OF while using
and -10~45OC/14~113OF while storing).
9. Battery Recycling: The product battery
should not be treated as household waste,
instead, it should be handed over to the
applicable battery collection point for
recycling.
10. Only have your device repaired by Mi-One®
Brands; do not attempt to repair the
device by yourself as damage or personal
injury may occur.
11. Should you experience any adverse effects
from using this product, please visit
https://mipod.com/pages/vapevigil
Warranty period is 180 days from date of
purchase by the end users. Please consult with
Mi-One®Brands directly or your Mi-One
Brands®distributors on warranty or return policy
details. Mi-One®Brands reserves the right of
final decision in all warranty cases, Mi-One®
Brands may interpret and revise the content of
this warranty terms. For more warranty or return
policy information, please visit the official
website mipod.com. Contact Customer Service
online at https://mipod.com via live chat or
email [email protected] also by
phone [phone]
WARRANTY

WWW.MIPOD.COM
Designed in the USA, Made in China