Pulsar Barb Fire Vaporizer User manual

FEATURES
5 Second Heat Time
Dual Ribbon Twist Kanthal Wrapped Quartz Coil
Ceramic Chamber
Stainless Steel Body
Removable Mouthpiece
Splash Guard
Adjustable Airflow Control
Replaceable Coil
5 Click Button On/Off
Auto Shutoff after 5 Minutes
SPECS
Battery Capacity: 1100mAh
Ohms: 0.2-0.3
Wattage: 15-25
Input: 5V/1A
QUICK START GUIDE
First, attach the Pulsar Barb Fire Battery to the
included USB Charger, and plug into a handy USB
port. Make sure to not let the unit hang as this can
damage the USB connection. While charging, a red
light glows near micro USB plug. Light turns green
when charged. Unit is fully charged, approx. 1.5 hours.
Before using the Pulsar Barb Fire, first, heat the unit a
few times empty. This will burn off any impurities
collected during manufacturing.
HOW TO USE
Remove the all metal mouthpiece. Load desired
concentrate into the atomizer. Replace the
mouthpiece. Click the button 5 times to turn on. When
power button is held, the light above will show red, and
when it turns to green, the device is ready for vaping.
The Pulsar Barb Fire produces water pipe sized rips!
POWER LEVEL INDICATION
When the device is turned on, the power button light
will flash three times to show the following power levels.
Green: 100% - 60%
Orange: 60% - 20%
Red: 20% - 0
Lower Battery Indicator: The Green & Red lights will
flash alternately 5 times, then the device will shut down.
The Pulsar Barb Fire is designed to get the most out of
any concentrate that comes its way. Housed in a
heavy-duty, all stainless steel body, the unique,
flat-ribbon, twisted titanium coil delivers the right
amount of heat, along with the best amount of flavor.
Designed in USA • Assembled in China
Manufactured By Pulsar®
Asheville, NC 28806
www.PulsarVaporizers.com
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

www.smokecartel.com
Online Headshop