Miboxer PIR1-RF User manual

Subordinate New Brand
2.4GHz PIR Sensor instrucon manual
Model No.: PIR1-RF
Feature
Parameter
Descripon
Baery Installaon
Link/Unlink
Funcon Descripon
Funcon seng method
Compability
Installaon Direcon
Aenon
.......................................................................................... 2
..................................................................................... 2
................................................................................... 3
......................................................................... 3
.................................................................................... 4
.................................................................... 5
............................................................... 6
................................................................................ 7
...................................................................... 8
....................................................................................... 9
Contents

Support to link with one or mul 2.4G lighng series
Support to set "hold me" funcon
1. Feature
2. Parameter
Moon detecon support smart scene automaon and
intrusion warning
Built-in high sensive lighng sensor
Strong magnec mounng method
Flexible 360°angle
Model No.: PIR1-RF
Baery: CR123A 3V
Standby Power Consumpon: 12μA
Detecon Angle: 120°
Detecon Distance: 7m
RF: 2.4GHz
Control Distance: 30m
Working Temperature: -10~40°C

3. Descripon
4. Baery Installaon
Open the back case anclockwise Install CR123A 3V baery
(purchase separately)
Back caseSETMagnec holder Indicator
Baery (purchase separately)Fresnel lens
CR123A 3V

12
2
5. Link/Unlink
PIR sensor need to be paired with lights, countless lights can be
worked with it.
1). Linking Code Instrucons
Power off 10 seconds and
power on again.
Short press " SET " buon
3 mes within 3 seconds.
Lights blink 3 mes
slowly means linking
is done successfully.
Linking failed if light is not blinking slowly, Please follow above steps again.
(Note: Light that have linked can't link again)
2). Unlinking Code Instrucons
Power off 10 seconds and
power on again.
Short press " SET " buon
5 mes within 3 seconds.
Lights blink 10 mes
quickly means unlinking
is done successfully.
Unlinking failed if light is not blinking quickly, Please follow above steps again.
(Note: Light haven't linked that don't need to unlink)
Power Light Power Light
1
Power Light
3
Power Light
3

*Brightness feature while moon detected:
Lighng up, brightness can be set 20% or 100%.
*Light Sense:
ON: PIR sensor only works in gloomy area
OFF: PIR sensor works in any place
*Night Light:
ON: bright sence to gloomy sence, light up automacally (brightness
is 1%), gloomy sence to bright sence, light off automacally
OFF: Light is off while moon is not detected in any sence
*Hold me while moon detected
(30S / 2 minutes / 10 minutes / 60 minutes):
6. Funcon Descripon
For example: it will turn on light if moon is detected and acvated
mer funcon (30 seconds), the light will be off if new moon
is not detected within 30 seconds.

Long press “SET” seconds,
Indicator flashes quickly to start
seng up. (Aenon: exited
without operaon within 10
seconds)
Factory default:
Short press the keys,
details as following
Brightness feature while moon detected: 100%
Hold me while moon detected: 30 seconds
Light sence: OFF
Night Light: OFF
7. Funcon seng method
Hold Time
Master On: 100% Master Off: 20%
Short press 1 me on remote
Brightness feature while moon
detected
Set up funcon
Light Sence（ON/OFF）
Night Light（ON/OFF）
On
Off
Zone-1
On
Off
Zone-2
30S
2Minutes
Zone-3
10Minutes
60Minutes
Zone-4
1 2
Maximum distance 1m

8. Compable with these 2.4G RF remote
controls (Purchased separately)
B3 / B3-B / T3
B1 / T1 B2 / T2
FUT089
FUT089-B
FUT092
FUT092-B
FUT096
FUT096-B
B8
FUT089S FUT006 FUT007
FUT100
B4 / B4-B / T4

9. Installaon Direcon
1). Locaon: install it in the area where people usually cross over and
distance must be 2m over the ground. As shown below.
2). Stay away from air condioner, fridge, oven..etc which is easy to
affect temperature, don’t display it under sunshine directly.
120°
0 0
2m
7（m） 7（m）
Useful detecng area (vercal view) Useful detecng area (overhead view)
120°

3). Remove scker on the back base, fix base holder on suitable
posion.
10. Aenon
Remove scker Put it on magnec base
1). Remove baery if don’t oen use it, save it in dry and stac free
condion.
2). Don’t use it near metal or strong hertz area, it will affect
communicaon distace.
Made in China