Micasa MA0278CH-B1500 User manual

CONVECTOR HEATER
Instruction Manual
Model: MA0278CH-B1500 & MA0279CH-B2000
Read in full and retain for future use

2
MICASA branded product provides an affordable range of well presented, elegant home ware and appliances.
Products which are ranged and selected are chosen to suit your contemporary lifestyle and cater for your home
ware needs today. Micasa aims to provide products which are fashionable, affordable, and reliable to meet
your home ware demands.
MICASA will provide value for money products to make every day home life more enjoyable and convenient.
The MICASA range of products is continually developing and new products will be introduced with expansion
of the range. So keep in touch for further news on new products in the future.
We hope you enjoy your experience with MICASA
Contact [e-mail]
Visit www.micasa-appliances.com
Helpline
New Zealand call toll free 0508-274-2722
Australia call [phone]
Distributed by
Asia Pacific Brands Limited
PO Box 301145,
Auckland 0752,
New Zealand
FEATURES
ü2 Heat settings
üAdjustable thermostat
üOver heat protection
üIndicator lights
üWall mounted or castor wheels
WARRANTY
Retain your receipt as proof of purchase.
If for any reason the appliance does not function correctly or shows signs of damage please stop using
immediately and return it immediately to the retailer.
This product is covered by a 12 month warranty by Harvey Norman (NZ) PTY Ltd. This warranty does not
exclude any obligations to the consumer covered by the NZ Consumers guarantee act.

3
PARTS DETAILS
1. Power Switch
2. Thermostat
3. Control Panel
4. Rear Panel
5. Wall Mount Bracket
6. Rubber Post
7. Support Base
8. Castor
BEFORE FIRST USE
•Before first use remove any stickers or similar from the appliance. (Except the rating label! and Do NOT
COVER warning).
•Dispose of any plastic bags responsibly as they pose a risk to young children of suffocation.
•Wipe the outside of the appliance with a moist cloth and dry with a towel.
ASSEMBLY
Installing the Castors
1. The heater is packaged with the feet unattached. You must attach them before operating the heater.
2. Lay the heater on a flat table with the bottom of the heater overhanging the edge slightly.
3. Align the foot and castors with the holes provided on the base of the heater.
4. Fix the feet to the heater using the screws supplied.
5. Stand the heater on its feet on a stable flat surface.
WARNING: Do not operate without feet attached. Operate the heater only in upright position (feet on
the bottom, controls on the top), any other position could create a hazardous situation.
Wall Mounting
1. Attach the mounting brackets to the wall, using the bolts and nuts (supplied).

4
2. Place the heater, leaving the distance between the base device and the floor for at least 50 cm, and make
sure that the distance between any upholstery and curtains is at least 1 m. Attach the rubber stops to the
back of the device.
3. Place small brackets on the rear of the notches on the back of the heater (Position 5). Then screw the
Small brackets to the larger ones. It is necessary to secure the convector on the wall.
MA0278CH-B1500
MA0279CH-B2000

5
OPERATION
Before First Use
•Do not insert the plug before installing the wheels and ensuring the heater is standing securely.
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having
not been used for a long period of time the heaters may emit some smells and fumes. This will disappear
when the heater has been operating for a short while.
Location
•Place at least 1m from and curtains.
•Keep all combustible materials such as furniture, pillows, bedding, paper, clothes and curtains at least 1m
away from heater.
•Do not place anything on top of Heater.
•Do not use in wet or moist locations; for example, bathrooms or laundry areas, or in areas where paint or
other flammable or volatile liquids are used or stored.
Operation
1. Set all the controls to the OFF position (0) and insert the plug into a socket-outlet that is compatible with
the rating label on the product. Be sure that plug fits firmly.
2. Rotate the thermostat knob clockwise to MAX position.
3. Turn on the power by rotating the power switch clockwise. Power output can be set to either of two power
levels: LOW (I) and HIGH (II).
4. When your room reaches the desired temperature, slowly rotate the thermostat knob counter clockwise
until the light goes out. The thermostat can now be left at this setting. As soon as the room temperature
has dropped below the set temperature, the unit will switch itself on automatically until the set temperature
has been reached again. In this way the room temperature remains constant with the most economical use
of electricity.
5. If you want to change the room temperature setting, rotate the thermostat knob clockwise to raise the
temperature, or counter clockwise to lower it.
6. This heater includes an overheat protection system that shuts off the heater when parts of the heater is
getting excessively hot.
7. To completely shut the heater off, turn all the controls to OFF (0), and remove the plug from the socket-
outlet.