Micro Prose X-COM-UFO DEFENSE User manual

®
Game Design and Program Copyright ©1994 Mythos Games Ltd
Documentation, Packaging and Logo Copyright ©1994 MicroProse Ltd
UFO DEFENSE
PLAYER’S HANDBOOK
UFO Manual E1 for PDF 2/19/97 7:44 PM Page 1

REQUIRED EQUIPMENT
• Computer
X-COM UFO Defense requires an IBM PC AT or a computer 100%
compatible with this model.
The computer must have a hard disk.
X-COM UFO Defense requires at least an 80386 processor and a
minimum of 4MB RAM.
• Controls
You will require a Mouse and Keyboard to play X-COM UFO Defense.
• Display
X-COM UFO Defense requires a color monitor with a VGA graphics
system. If you are using a compatible graphics card/monitor, it must be
100% compatible with VGA systems.
• Disk Drives
X-COM UFO Defense must be installed onto a hard disk.
• DOS
You must have IBM PC-DOS or Microsoft MS-DOS version 5.0 or higher.
SOUND
X-COM UFO Defense supports the PC internal speaker, AdLib compatible
cards, SoundBlaster compatible cards and the Roland LAPC-1.
PAGE 1
UFO DEFENSE
TECHNICAL SUPPLEMENT
FOR IBM PC COMPATIBLES
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 1

GAME ENHANCEMENTS AND OTHER
INFORMATION
1. THE BATTLESCAPE OPTIONS SCREEN
The Battlescape Options screen (section 3.2.3.11 of the Player’s
Handbook) consists of the following:
Scroll Speed
Click on any of the numbered buttons to change the speed at which the
view window moves, from 1 (slowest) to 5 (quickest).
Scroll Type
Click on either of the numbered buttons to change the Scroll Type
between Trigger Scroll (press the Left Mouse Button when the Mouse
Pointer is at the edge of the screen) or Auto-Scroll (the view window
moves automatically when the Mouse Pointer is moved to the edge of
the screen).
Fire Speed
Click on any of the numbered buttons to change the speed at which
weapon shots move, from 1 (slowest) to 6 (quickest).
X-COM Movement Speed
Click on any of the numbered buttons to change the speed at which
your soldiers move, from 1 (slowest) to 6 (quickest).
PAGE 2
X-COM TECHNICAL SUPPLEMENT
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 3

Alien Movement Speed
Click on any of the numbered buttons to change the speed at which the
aliens move, from 1 (slowest) to 6 (quickest).
Click on the OK button to return to the Battlescape.
Click on the Save Game button to save your current game. You will be
taken to the Select Save Position screen. See section 7.2 of the separate
Player’s Handbook for full details of saving games.
2. THE BATTLESCAPE SOLDIER DATA SCREEN
The Soldier Data screen (section 3.2.3.16 of the Player’s Handbook)
contains the following information:
Time Units - the soldier’s remaining Time Units. These are required to
carry out everything from walking to firing weapons.
Energy - the soldier’s current Energy level. This will decrease as the
soldier carries out energy-consuming actions such as walking through
thick grass. The total energy available will be lowered if the soldier
receives fatal wounds to the torso.
Health - the soldier’s current Health. If the soldier has received Fatal
Wounds, each wound decreases Health by one point per turn. If Health
reaches zero, the soldier dies from the wounds incurred.
Fatal Wounds - the number of Fatal Wounds received by the soldier.
The Medi-Kit can be used to heal Fatal Wounds.
Bravery - the soldier’s Bravery. This determines the likelihood of the
soldier’s Morale decreasing.
Morale - the soldier’s Morale. A soldier will lose Morale if the battle
starts to swing in the alien’s favor. If the Morale falls below 50, the
soldier could panic.
PAGE 3
X-COM TECHNICAL SUPPLEMENT
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 4

PAGE 4
X-COM TECHNICAL SUPPLEMENT
Reactions - the soldier’s Reactions. This determines how effective the
soldier is at opportunity fire - taking a shot during the alien’s turn (see
section 3.2.6 of the Player’s Handbook for full details).
Firing Accuracy - the soldier’s accuracy at firing weapons. This will
increase as the soldier gains battle experience.
Throwing Accuracy - the soldier’s accuracy at throwing objects. This will
increase as the soldier becomes more experienced.
Strength - the soldier’s Strength. This affects the distance which the
soldier can throw objects.
Psionic Strength - the soldier’s Psionic Strength. This is a measure of
the soldier’s natural ability to defend against an alien psionic attack.
Psionic Skill - the soldier’s Psionic Skill. This is the soldier’s ability to
use the Psi Amp in mental combat.
Armor - the soldier’s armor status, divided into sections for Front, Left,
Right, Rear and Under. This will rise as the soldier is equipped with
armor manufactured by your engineers.
3. THE BASE INFORMATION SCREEN
The Base Information screen (section 4.2.2 of the Player’s Handbook)
contains some extra features:
The Base Icons
In the top-right of the screen, there are eight Base Icons which allow
you to change the currently selected base. These function in exactly the
same way as the Base Icons in the Bases screen.
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 5

PAGE 5
X-COM TECHNICAL SUPPLEMENT
The Base Name
Click on the base name in the top-right of the Base Information screen
to change the base name. A flashing * cursor will appear. Use the
Backspace Key to erase the previous name, type in the name of your
choice using the Keyboard and press the Return Key.
Short-Range Detection
This is a display of the short-range detection ability of the base. Short
range detection systems have a range of 300 nautical miles.
Long-Range Detection
This is a display of the long-range detection ability of the base. Long
range detection systems have a range of 450 nautical miles.
Note: X-COM radar systems, while very long ranged, rotate very slowly - once
every 10 minutes. This means that your base will detect UFOs more effectively if
more than one radar system is in place.
The Stores Button
Click on the Stores button to view a list of the items currently in the stores.
The Maintenance Button
Click on the Maintenance button to view a list of your monthly
expenses. These are made up of the following:-
Craft - X-COM do not own Skyrangers or Interceptors, they are leased
from their owners for a monthly fee.
Personnel - your personnel are paid monthly, according to standard
world pay scales.
Base Facilities - base facilities are re-equipped monthly. See the
UFOpaedia for details of the maintenance cost of each base facility.
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 6

4. SOLDIERS
The Soldiers screen (section 4.2.10 of the Player’s Handbook) contains
some extra features:
Click on the Soldiers button in the Bases screen to access the Soldier
List. This displays all the soldiers at the currently selected base,
regardless of which craft they are assigned to.
Use the Mouse to highlight and select a soldier. You will be taken to the
Soldier Data screen.
The Soldier Data screen
The selected soldier’s rank badge is in the top-left of this screen.
The soldier’s name is next to the rank badge. Click on this to change
the soldier’s name. A flashing * cursor will appear. Use the Backspace
Key to erase the previous name, type in the name of your choice using
the Keyboard and press the Return Key.
PAGE 6
X-COM TECHNICAL SUPPLEMENT
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 7

PAGE 7
X-COM TECHNICAL SUPPLEMENT
Click on the Armor button to change the armor worn by the soldier.
The Select Armor window will appear, listing the types of armor
available and the number of each in storage.
Click on an armor button. The soldier will now be equipped with the
selected armor - its name appears next to the Armor button.
Below the buttons is a display of the following:
Rank - the soldier’s X-COM rank.
Missions - the number of missions which the soldier has taken part in.
Kills - the number of aliens the soldier has killed.
Craft - the craft which the soldier is currently assigned to.
Wound Recovery - the number of days before the soldier recovers to
full health.
In the bottom two-thirds of the screen, there is a display of the soldier’s
physical statistics. These are identical to those in the Battlescape Soldier
Data screen (see the Battlescape Soldier Data Screen section of this
Technical Supplement for full details).
Click on the FFEE buttons to view data for the next/previous soldier
at the base.
Click on the OK button to return to the Soldier List screen.
Click on the OK button in the bottom of the Soldier List screen to
return to the Bases screen.
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 8

PAGE 8
X-COM TECHNICAL SUPPLEMENT
OPERATING DIFFICULTIES AND
LOADING PROBLEMS
Q. Why won’t my game load?
Check all memory requirements listed in this Technical Supplement.
You will need 560 K of Conventional Memory and 1 Mb of Extended
Memory (XMS) or Expanded Memory (EMS).
Conventional Memory
To check how much Conventional Memory is available, type MEM/C
from the C:\> prompt and press the Return key. Look for the Largest
Executable Program details. If there is insufficient Conventional
Memory, you may need a Boot Disk.
Q. What is a Boot Disk?
This is a Start Up disk for your computer which contains alternative
start up files to those on your hard disk. The Boot Disk will allow more
Conventional Memory to be available.
Making a Boot Disk
Instructions for making an MS-DOS Boot Disk (also known as a System
Disk) will be found in your Microsoft manual.
Using a Boot Disk
Insert the Boot Disk into your floppy disk drive A and then switch on the
computer. You should leave the disk in the floppy drive during play.
Slow Running
If you are not running from a boot disk, please ensure that you have
SMARTDRV.SYS or SMARTDRV.EXE loaded into your CONFIG.SYS or
AUTOEXEC.BAT.
If you are using MS-DOS 5.0, make sure you have the following line in
your CONFIG.SYS file:
devicehigh=c:\dos\smartdrv.sys
If you are using MS-DOS 6.0 or 6.2, make sure the following line is in
your AUTOEXEC.BAT file:
loadhigh c:\dos\smartdrv.exe
However, this line may need removing if memory problems occur.
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 9

PAGE 9
X-COM TECHNICAL SUPPLEMENT
Q. Can I run my game through Windows?
No, this is not recommended, it is likely that you will have insufficient
memory to do so.
Q. Does my game run with DR DOS, Novell DOS 7 or
OS/2?
Success is not guaranteed. MicroProse games are currently designed to
run with MS-DOS 5.0 or 100% compatible DOS.
Q. What is Base Memory?
This is the original 1Mb (1024K) in your machine. It is divided up into
Conventional Memory (640K), where MS-DOS and all PC programs load
and Upper Memory (384K), where system programs reside.
In MS-DOS 5.0 the bulk of the operating system and associated drivers
(such as the mouse driver) are normally loaded into Upper Memory.
Other drivers held in the area of Conventional Memory will reduce
your 640K available for the program.
It is important to have as much Conventional Memory as possible free.
Q. What is Extended Memory (XMS)?
Further memory, beyond the 1Mb of Base Memory on your PC is called
Extended Memory. XMS can be used to free more Conventional
Memory so that bigger games can be run. XMS can also be used to
simulate Expanded Memory.
Q. What is Expanded Memory (EMS)?
EMS was originally designed to give the PC more memory to run
programs. It has been around far longer than XMS so most programs
take advantage of it. Most MicroProse games take advantage of EMS.
The DOS command EMM386.EXE can be used to turn XMS into EMS
and should be in your CONFIG.SYS.
Remember that hard disk space is also measured in Megabytes (Mb). Don’t
confuse this with memory - the two are completely different!
Memory Managers
If the program is occasionally freezing or crashing to DOS, you may
have a conflict with your current memory manager. MicroProse
recommend only the drivers which come with MS-DOS (i.e.
HIMEM.SYS and EMM386.EXE). Try using the memory managers
which come with MS-DOS 5.0, Windows 3.1, MS-DOS 6.0 or MS-DOS 6.2, in
that order.
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 10

PAGE 10
X-COM TECHNICAL SUPPLEMENT
Mouse Drivers
Another common cause of the program freezing or crashing is due to a
conflict with your current Mouse Driver. MicroProse recommend the
Microsoft driver, MOUSE.COM or MOUSE.SYS v8.20 or higher. See the
MS-DOS manual for full details. To check which Mouse Driver you are
using, run the MSD program which comes with Windows 3.1 and MS-
DOS 6.0/6.2.
The Read Me File
The latest notes regarding this program, additions, revisions etc. can be
found in a file named README.TXT in the UFO directory. These
notes may be read by using either standard DOS commands or the DOS
5.0 text editor (type EDIT README.TXT).
PC Tec Sup E for PDF 2/19/97 7:35 PM Page 11

PAGE 11
CREDITS
Game Design and Programming Mythos Games Limited
Julian Gollop
Nick Gollop
Graphics and Animation Julian Gollop
John Reitze
Martin Smillie
Music John Broomhall
Sound Effects Andrew Parton
Quality Assurance Pete Woods
Andrew Luckett
Richard Bakewell
Darren Kirby
Phil McDonnell
Jason Sampson
Manual Author Kristian Ramsay-Jones
Managing Editor Alkis Alkiviades
Packaging and Manual Design John Emory
Joe Morel
Cesar Novoa
Sarah Warburton
Producer Tim Roberts
Publishers Paul Hibbard
Pete Moreland
UFO Manual E1 for PDF 2/19/97 7:44 PM Page 11

PAGE 12
BACKGROUND
It is the year 1999. Unidentified Flying Objects (UFOs) have started appearing with disturbing regularity in the night skies. Reports of
violent human abductions and horrific experimentation has struck
terror into the hearts of millions. Mass public hysteria has only served
to expose Earth’s impotence against a vastly superior technology.
Many countries have attempted to deal independently with the aliens.
In August 1998, Japan established an anti-alien combat force; the
Kiryu-Kai. Equipped with Japanese-made fighter aircraft, the Kiryu-Kai
certainly looked like a powerful force. However, after 5 months of
expensive operations they had yet to intercept their first UFO. The
lesson was clear: this was a worldwide problem which could not be
dealt with by individual countries.
On December 11, 1998, representatives from the world’s most
economically powerful countries gathered secretly in Geneva. After
much debate, the decision was made to establish a covert independent
body to combat, investigate and defeat the alien threat. This
organization would be equipped with the world’s finest pilots, soldiers,
scientists and engineers, working together as one multi-national force.
This organization was named the Extraterrestrial Combat Unit.
INTRODUCTION
UFO Manual E1 for PDF 2/19/97 7:44 PM Page 12

PAGE 13
INTRODUCTION
THE GAME
X-COM UFO Defense puts you in command of X-COM, with the finest Earth technology at your disposal to defend the Earth
from alien invasion. Shooting down UFOs is just the beginning. You
will then control a squad of heavily-armed soldiers, edging cautiously
through the local terrain, battling aliens and recovering UFO
technology.
When you command a ground assault, you will use the 3-D isometric
‘Battlescape’ display. This shows terrain, buildings, X-COM craft and
UFOs, but will only display what your soldiers can see - so beware of
danger lurking around corners or down dark corridors!
Successful ground assault missions mean that X-COM scientists can
research alien technology. Engineers can then reproduce their
superior weapons and spacecraft. Soon you will be fighting the aliens
with their own technology.
As the game progresses, you will use the on-line ‘UFOpaedia’ to learn
the latest details from your research teams about alien technology, life
forms and their real objectives. Above all, you must watch the world
political situation. Look out for governments which may be forced to
make secret pacts with the aliens and make sure you defend the
countries who fund X-COM heavily.
X-COM UFO Defense. Command Earth’s forces against the alien
terror!
UFO Manual E1 for PDF 2/19/97 7:44 PM Page 13

PAGE 14
THIS MANUAL
This Manual is split into two main sections:
Section 1: The Gameplay Tutorials are designed to get you
playing X-COM UFO Defense as quickly as possible. You are
recommended to follow each tutorial before you start to play the
game on your own.
Section 2: The Reference Guide is intended for the player who is
familiar with how to play X-COM UFO Defense and needs to learn
more about particular game features.
The Controls
You will require a mouse to play X-COM UFO Defense. This manual
will refer to ‘clicking’ on buttons, icons or highlighted text. To do this,
simply move the cursor over the option and press the Left Mouse
Button (LMB).
INTRODUCTION
UFO Manual E1 for PDF 2/19/97 7:44 PM Page 14

SECTION 1
THE GAMEPLAY TUTORIALS
UFO Manual E1 for PDF 2/19/97 7:44 PM Page 15

PAGE 16
BEFORE WE BEGIN...
Welcome to X-COM UFO Defense. These tutorials are designed to help you start playing with the minimum of trouble. The three
main sections of the game are covered here; the Geoscape, the
Battlescape and the Bases Screen.
For extra information on particular game features, see the
Reference Guide section of this manual.
First of all, we will start a new game.
Starting a New Game
1. Install and Load X-COM UFO Defense.
2. After the animated introduction, you will be taken to the game
options screen.
THE GAMEPLAY TUTORIALS
UFO Manual E1 for PDF 2/19/97 7:45 PM Page 16

PAGE 17
SECTION 1
3. Move the mouse pointer over the New Game option and click on
the Left Mouse Button (LMB) to select. You will now be taken to the
Select Difficulty Level screen.
4. Move the mouse pointer over the Beginner option and click on
the LMB to select. You will now be taken into the main game screen,
the Geoscape. The first thing you must do is to position your first X-
COM base on the surface of the Earth.
UFO Manual E1 for PDF 2/19/97 7:45 PM Page 17

PAGE 18
Setting-Up a New X-COM Base
5. The message Select Site for New Base will appear in the top of
the screen.
In the bottom-right hand side of the screen, you will see three green
spheres surrounded by arrows. These are the View Controls which allow
you to rotate and magnify the display of the Earth.
• Click on the icon. The Earth display will be magnified, some
borders around countries will appear.
6 • Click again on the icon. The Earth display will be magnified
again, some country names will now appear.
7. • Click twice on the icon. The Earth display will return to its
minimum magnification.
8. The icon allows you to rotate the Earth display up, down, left
or right.
• Click a few times on the up arrow, the Earth display will tilt towards
you.
9. • Click a few times on the left arrow, the Earth display will rotate.
10. • Position the mouse pointer over the Earth and click on the Right
Mouse Button to center the Geoscape on that location.
By using a combination of these controls, you can manipulate the
Earth display to show any part of the Earth in detail.
11. • Click on any part of the Earth’s surface (except the sea) to
position your first base.
Note: It is a good idea to position your base in the middle of a large land mass such
as North or South America, Russia or Europe. This will give you a better chance of
defending that area from UFO raids.
12. A window containing the prompt Base Name? will appear.
Type in a name using the Keyboard and press the Return Key. You
have now set up a new X-COM base and you are ready to start
playing X-COM UFO Defense.
SECTION 1
UFO Manual E1 for PDF 2/19/97 7:45 PM Page 18

PAGE 19
SECTION 1
TUTORIAL 1: THE GEOSCAPE
Tutorial 1 guides you through the Geoscape’s basic controls and the
process of intercepting UFOs.
1. The Geoscape is the main screen for playing X-COM UFO Defense.
You will see your base on the 3-D view of the Earth, represented as a
hollow blue square.
On the right-hand side of the screen, there is a list of Menu Options, a
display of the Game Time, the Time Controls and the View Controls.
The Time Controls are very important to the game, and it is these
which we will go through next.
Note: If you wish to pause time at any stage during the game, simply click on any
of the Menu Options.
3994 - 9668
Menu Options
Game Time
Time Controls
View Controls
UFO Manual E1 for PDF 2/19/97 7:45 PM Page 19