Sega Let's Go Jungle User manual

SEGA AMUSEMENTS EUROPE LIMITED
SUITE 3A, OAKS HOUSE, 12/22 WEST STREET, EPSOM, SURREY. KT18 7RG
TEL: +(44)1372 731820 FAX:+(44)1372 731849
420-6988-01UK

i
TABLE OF CONTENTS
TABLE OF CONTENTS
E0-0611 420-6988-01
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
TABLE OF CONTENTS....................................................................................... i
INTRODUCTION ................................................................................................ iii
1HANDLING PRECAUTIONS...................................................................... 1
2PRECAUTIONS REGARDING INSTALLATION LOCATION .................... 5
2-1 LIMITATIONS OF USAGE...........................................................................................6
2-2 OPERATION AREA .....................................................................................................7
3PRECAUTIONS REGARDING PRODUCT OPERATION.......................... 8
3-1 BEFORE OPERATION ...............................................................................................8
3-2 DURING OPERATION (PAYING ATTENTION TO CUSTOMERS) ..........................10
4PART DESCRIPTIONS ........................................................................... 12
5ACCESSORIES ....................................................................................... 13
6ASSEMBLY AND INSTALLATION........................................................... 15
7PRECAUTIONS WHEN MOVING THE MACHINE .................................. 46
7-1 MOVING THE MACHINE...........................................................................................46
7-2 SEPARATING THE MAIN CABINET .........................................................................48
8GAME DESCRIPTION.............................................................................. 54
9EXPLANATION OF TEST AND DATA DISPLAY ..................................... 57
9-1 PUSH SWITCH AND COIN METER .........................................................................59
9-2 SYSTEM TEST MODE ..............................................................................................60
9-3 GAME TEST MODE...................................................................................................61
10 PROJECTOR............................................................................................ 72
10-1 CLEANING THE SCREEN.......................................................................................73

ii
TABLE OF CONTENTS
11 CONTROL UNIT....................................................................................... 74
11-1 HOW TO REMOVE CONTROL UNIT......................................................................75
11-2 ADJUSTING OR CHANGING THE X AXIS VOLUME.............................................78
11-3 ADJUSTING OR CHANGING THE Y AXIS VOLUME.............................................83
11-4 REPLACING THE TRIGGER SWITCH....................................................................89
11-5 GREASING .............................................................................................................92
11-6 ADJUSTMENT OF VIBRATION NOISE ..................................................................94
12 COIN SELECTOR & CREDIT SETTINGS................................................ 96
13 REPLACING THE FLUORESCENT LAMPS ......................................... 101
14 PERIODIC INSPECTION........................................................................ 104
15 TROUBLESHOOTING ........................................................................... 106
16 GAME BOARD ....................................................................................... 109
16-1 HOW TO REMOVE GAME BOARD ......................................................................110
16-2 COMPOSITION OF THE GAME BOARD..............................................................113
17 DESIGN RELATED PARTS.................................................................... 114
18 PARTS LIST ........................................................................................... 115
19 WIRE COLOR CODE TABLE................................................................. 157
20 WIRING DIAGRAM ................................................................................ 159

INTRODUCTION
iii
INTRODUCTION
This manual is intended to provide detailed descriptions together with all the necessary information covering the
general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
"LET’S GO JUNGLE! - LOST ON THE ISLAND OF SPICE."
This manual is intended for the owners, personnel and managers in charge of operation of the product.
Operate the product after carefully reading and sufciently understanding the instructions.
In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the ofce listed below or the point-of-purchase for this product.
Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word "IMPORTANT" and the symbol below.
SEGA AMUSEMENTS EUROPE, LTD.
Suite 3a, Oaks House 12-22, West Street, Epsom, Surrey, KT18 7RG, United Kingdom
Telephone: [phone] Facsimile: [phone]
e-mail: [email protected] http://www.sega-amusements.co.uk
Indicates important information that, if ignored, may result in the mishandling of
the product and cause faulty operation or damage to the product.
Installation space 1,532 mm (60.3 in.) [Width] x 2,765 mm (108.9 in.) [Depth]
Height: 2,195 mm (86.4 in.)
Weight: 587.5 kg (1,295.2 lbs.)
Power, maximum current: 520 W, (AC 230 V, 50 Hz Area)
Monitor: 55 SONY BRAVIAType Projector
SPECIFICATIONS
NOTE: The contents herein described are subject to change without notice.

iv
INTRODUCTION
Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualied professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialized knowledge.
The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:
Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-
vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by
carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable
parts.
Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.
Other qualied professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-
nance of amusement equipment. The individual should have either graduated from technical school or hold similar
qualications in electrical/electronics/mechanical engineering.
Activities to be carried out by other qualied professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.
Procedures not described in this manual or marked as ‘to be carried out by site
maintenance personnel or other qualied professionals’ should not be carried
out by personnel without the necessary skill or technology. Work carried out by
unqualied persons may cause serious accidents, including electrocution.
Denition of 'Site Maintenance Personnel or Other Qualied Individuals'

HANDLING PRECAUTIONS
1
1
HANDLING PRECAUTIONS1
● Beforeperformingwork,besuretoturnthepoweroff.Performingthework
withoutturningthepoweroffcancauseanelectricshockorshortcircuit.Inthe
caseworkshouldbeperformedinthestatusofpoweron,thismanualalways
statestothateffect.
●Toavoidanelectricshockorshortcircuit,donotpluginorunplugquickly.
●Toavoidanelectricshock,donotpluginorunplugwithawethand.
●Donotexposepowercordsorearthwiresonthesurface,(oor,passage,etc.).
Ifexposed,thepowercordsandearthwiresaresusceptibletodamage.Dam-
agedcordsandwirescancauseanelectricshockorshortcircuit.
●Toavoidcausingareoranelectricshock,donotputthingsonordamage
thepowercords.
●Whenorafterinstallingtheproduct,donotunnecessarilypullthepowercord.If
damaged,thepowercordcancauseareoranelectricshock.
● Incasethepowercordisdamaged,askforareplacementthroughwherethe
productwaspurchasedfromortheofcehereinstated.Usingthecordasis
damagedcancausere,anelectricshockorleakage.
● Besuretoperformgroundingappropriately.Inappropriategroundingcan
causeanelectricshock.
● Besuretousefusesmeetingthespeciedrating.Usingfusesexceedingthe
speciedratingcancauseareoranelectricshock.
● BesurethatconnectionssuchasICBDaremadeproperly.Insufcientinsertion
cancauseanelectricshock.
● Specicationchanges,removalofequipment,conversionand/oraddition,not
designatedbySEGAarenotpermitted.
- Failuretoobservethismaycauseareoranelectricshock.Non-compli-
ancewiththisinstructioncanhaveabadinuenceuponphysicalconditions
oftheplayersortheonlookers,orresultininjuryduringplay.
- SEGAshallnotbeheldresponsiblefordamage,compensationfordamage
toathirdparty,causedbyspecicationchangesnotdesignatedbySEGA.
● Donotperformanyworkorchangepartsnotlistedinthismanual.Doingso
mayleadtoanaccident.
Ifyouneedtoperformanyworknotlistedinthismanual,requestworkfromthe
ofceindicatedinthismanualorthepointofpurchase,orinquiresfordetails.
● Besuretoperformperiodicmaintenanceinspectionshereinstated.
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters
herein stated can cause personal injury or damage to the machine.

2
HANDLING PRECAUTIONS
1
● FortheICboardcircuitinspections,onlythelogictesterisallowed.Theuseofa
multiple-purposetesterisnotpermitted,sobecarefulinthisregard.
● Theprojectorisemployedforthismachine.Theprojector’sscreenissusceptible
todamage,therefore,beverycarefulwhencleaningthescreen.Fordetails,
refertothesection“Projector.”
● Staticelectricityfromyourbodymaydamagesomeelectronicsdevicesonthe
ICboard.BeforehandlingtheICboard,touchagroundedmetallicsurfaceso
thatthestaticelectricitycanbedischarged.
● Somepartsarenotdesignedandmanufacturedspecicallyforthisgamema-
chine.Themanufacturersmaydiscontinue,orchangethespecicationsofsuch
general-purposeparts.Ifthisisthecase,SEGAcannotrepairorreplaceafailed
gamemachinewhetherornotawarrantyperiodhasexpired.

HANDLING PRECAUTIONS
3
1
CONCERNING THE STICKER DISPLAY
This SEGA product has stickers attached describing
the product manufacture No. (Serial No.) and Electrical
Specications. It also has a Sticker describing where to
contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention
the Serial No. and Name of Machine indicated on
the Sticker. The Serial Number indicates the product
register. Identical machines could have different
parts depending on the date of production. Also,
improvements and modications might have been made
after the publication of this manual. In order to ensure
you order the correct parts, mention the Serial No. when
contacting the applicable places.
CONCERNING WARNING DISPLAYS
This SEGA product has warning displays on stickers,
labels and/or printed instructions adhered/attached to or
incorporated in the places where a potentially hazardous
situation could arise. The warning displays are intended
for accident prevention for customers and for avoid-
ing hazardous situations relating to maintenance and
servicing work. Some portions of the cabinet contain
high voltage and may cause accidents if touched. When
performing maintenance, be very careful of the warning
displays. It is especially important that any complex re-
pair and replacement work not mentioned herein should
be performed by those technical personnel who have
knowledge of electricity and technical expertise.
In order to prevent accidents, caution any customer
ignoring the warnings to cease and desist immediately.

4
HANDLING PRECAUTIONS
1
Serial No. Display
Electrical Specications Display

PRECAUTIONS REGARDING INSTALLATION LOCATION
5
2
PRECAUTIONS REGARDING INSTALLATION LOCATION 2
Thisproductisanindoorgamemachine.Donotinstallitoutside.Evenindoors,
avoidinstallinginplacesmentionedbelowsoasnottocauseare,electric
shock,injuryand/ormalfunction.
- Placessubjecttorainorwaterleakage,orplacessubjecttohighhumidityin
theproximityofanindoorswimmingpooland/orshower,etc.
- Placessubjecttodirectsunlight,orplacessubjecttohightemperaturesinthe
proximityofheatingunits,etc.
- Placeslledwithinammablegasorvicinityofhighlyinammable/volatile
chemicalsorhazardousmatter.
- Dustyplaces.
- Slopedsurfaces.
- Placessubjecttoanytypeofviolentimpact.
- Vicinityofanti-disasterfacilitiessuchasreexitsandreextinguishers.
- Theoperating(ambient)temperaturerangeisnotfrom5°C to30°C.
- PlacesnearwaterorsprayfromwatersuchasaJetWashorSwimmingPool.