MicroDigial MDC-4 SERIES User manual

Ver.130111E
Design and specifications are subject to change without notice.
www.microdigital.co.kr
[email protected]
#1212, Hoseodae Venture Tower,
319, Gasan-Dong, Geumcheon-Gu, Seoul, Korea
Tel :[phone] / Fax :[phone]
P/N : 3690-0002C
TOTAL SECURITY G SOLUTION
Supreme Resolution
Day & Night Color Camera
www.microdigital.co.kr
USER MANUAL

2 MICRODIGITAL
USER INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
CAUTION

MICRODIGITAL 3
• This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
◆Information
USER INFORMATION
• Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• This installation should be made by a qualified service person and
should abide to all local codes.
◆Warning

4 MICRODIGITAL
PRECAUTIONS
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
USER INFORMATION

MICRODIGITAL 5
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
USER INFORMATION
NOTE
•Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
•Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
•Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.

6 MICRODIGITAL
• DESCRIPTION 8 - 10
• SPECIFICATION 11 - 12
• FEATURES 13 - 14
• COMPONENTS 15 - 29
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
15 - 17
18 - 24
25 - 27
28 - 29
• INSTALLATION 30 - 35
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
30 - 31
32
33
34 - 35
• OSD OPERATION 36 - 42
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
36 - 37
37 - 39
40
41
• INSTRUCTIONS 43
• OSD STRUCTURE 44
CONTENTS

MICRODIGITAL 7
CONTENTS
•LENS 45
• EXPOSURE 46 - 48
▪SHUTTER
▪AGC
▪SENS-UP
▪BLC
▪D-WDR
▪RETURN
46
46
47
47
48
48
• WHITE BALANCE 49 - 50
• DAY & NIGHT 51 - 52
• 3D DNR 53
• SPECIAL 54 - 59
▪CAM TITLE
▪D-EFFECT
▪RS-485
▪MOTION
▪PRIVACY
▪SYNC
▪LANGUAGE
▪DEFECT
54
55
56
56
58
59
59
59
• ADJUST 60
• RESET 61
• OSD STRUCTURE-MAIN MENU

8 MICRODIGITAL
Before operating the camera, confirm the camera model and proper input
power voltage. In order to help you understand this manual thoroughly,
we’ll introduce our model description.
◆MODEL DESCRIPTION
MDC - H8220 TDN - 30 HU
H 8 2 2 0
Built in Heater / UTC
Number of IR-LED
Day / Night
Filter mechanism
Power source
Number of Pixels
B/W(1) / Color(2)
Case type
Model type
• EX)
DESCRIPTION

MICRODIGITAL 9
DESCRIPTION
CASE TYPE MODEL
TYPE
COLOR PIXEL POWER D/N
LENS
IR/HEATER
/ CASE
1: MINI BULLET
2: MODULE
3: MINI SQUARE
4: BOX
5: ZOOM
6: IR BULLET
7: INDOOR
DOME
8: OUTDOOR
DOME
(VANDAL)
9: MINI VANDAL
i : IP
H : HD
1: B/W
2: COLOR
1: 270K
2: 520K
6: 1.3M
9: 2.1M
0: DC 12V
1: DUAL
VOLTAGE
(DC 12V/
AC24V)
2: AC230V
C
CTD
CDN
F
FDN
TDN
V
VX
VTD
VDN
WDN
F(E)
V(E)
IR : No. of
IR-LED
H: With Heater
U : UTC
CONTROL
MS : SUFACE
MOUNT TYPE
MF : FLUSH
MOUNT TYPE
IR & HEATER (MDC-6xxx, 7xxx, 8xxx MODEL)
-H -U
Built-in Heater UTC Remote Control
-30 -30H
Built-in IR LED
and CDS Sensor
Built-in IR LED
and CDS Sensor With Heater
Heater
Heater
IR
LED
IR
LED

10 MICRODIGITAL
PRECAUTIONS
DAY / NIGHT FILTER & MECHANISM
CDN
DIGITAL DAY / NIGHT
FDN
DIGITAL DAY / NIGHT
VDN
DIGITAL DAY / NIGHT
TDN
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
POWER SOURCE
MDC-xxx0
- DC 12V
MDC-xxx1
- AC 24V / DC 12V, Dual-Power
MDC-xxx2
- AC 230V
DAY / NIGHT
DAY / NIGHT
DAY / NIGHT
LENS
Fixed
Fixed
DC Auto
Iris Lens
AC 230V
AC 24V
DC 12V
DC 12V
DAY / NIGHT
DC Auto
Iris Lens
FILTER CHANGE
LENS
VARIFOCALVARIFOCAL
LENS
VARIFOCALVARIFOCAL
DESCRIPTION

MICRODIGITAL 11
Signal System NTSC PAL
Scanning Frequency 15,734KHz(H), 59.94Hz(V) 15,625KHz(H), 50.00Hz(V)
Image Sensor 1/3” Interline Transfer Type High Sensitivity Color CCD
Sync. System INT / LL
Total Pixels Number 1020(H) X 508(V), 520K pixels 1020(H) X 596(V), 610K pixels
Effective Pixels Number 976(H) x 494(V), 480K pixels 976(H) x 582(V), 570K pixels
Horizontal Resolution Color 700 TV Lines
Video Output Level 1.0Vp-p, 75ohm (Video 0. 714Vp-p Sync. 0.286Vp-p)
S/N Ratio 52 dB (AGC OFF, Weight On)
Dynamic Range 52dB(*128)
DAY / NIGHT COLOR / AUTO / BW / EXTERNAL
Sens Up AUTO / OFF
3 DNR ON / OFF (1~128 Level Selectable)
D-WDR INDOOR / OUTDOOR / OFF
AGC LOW / MIDDLE / HIGH
BLC BLC / HSBLC
AWB ATW / AWB / INDOOR / OUTDOOR / MANUAL / AWC
Mirror OFF / MIRROR / V-FLIP / ROTATE
Privacy Function ON / OFF (8 Zone)
Motion Detection ON / OFF (4 Zone Selectable)
Freeze ON / OFF
Sharpness 0~31 (Level Selectable)
Digital Zoom On(*32) / OFF
MONITOR LCD / CRT / USER
DEFECT SENSE-UP / DIFFERENCE / START
Electronic Shutter 1/60sec ~ 1/100,000sec 1/50sec ~ 1/100,000sec
OSD Built-in
Operating Temperature (-)30°C ~ (+)50°C, (-)40°C ~ (+)50°C (Built-In Heater Model)
Operating Humidity 95% RH max
Power Voltage DC12V ± 10%
SPECIFICATION

12 MICRODIGITAL
MODEL TYPE LENS
MDC-4xxx CDN C / CS MOUNT
TDN C / CS MOUNT (ICR-IR Cut Filter Removable Mechanism)
MDC-6xxx
TDN
35H, 45, 40H, 32 Filter Changeable Vari-Focal 6.0~50.0mm DC Auto Iris Lens
20, 20H, 36H, 48
24H, 42 Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
32U, 40HU Filter Changeable Vari-Focal 6.0~50.0mm 2 Motor Drive Lens
24HU, 42U Filter Changeable Vari-Focal 3.5~16.0mm 2 Motor Drive Lens
MDC-7xxx
FDN Built-In Fixed 3.6mm Board Lens
VDN Vari-Focal 3.5~16.0mm DC Auto Iris Lens
TDN Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
MDC-8xxx VDN Vari-Focal 3.5~16.0mm DC Auto Iris Lens
TDN Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
MODEL TYPE Min. ILLUMINATION
MDC-4xxx
CDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux(Sens-up x 256)
TDN 0.15 (Color) / 0.01 (BW) / 0.00001 / Lux(Sens-up x 256)
(ICR-IR Cut Filter Removable Mechanism)
MDC-6xxx
TDN
0.25 (Color) / 0.01 (BW) / 0.00001 Lux / Lux at F1.2 (Sens-up x 256)
0 Lux at IR LEDs On (ICR-IR Cut Filter Removable Mechanism)
MDC-7xxx
FDN 0.25 (Color) / 0.06 (BW) / 0.00001 / Lux at F1.2 (Sens-up x 256)
VDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux at F1.2 (Sens-up x 256)
TDN 0.25 (Color) / 0.01 (BW) / 0.00001 / Lux at F1.2 (Sens-up x
256) (ICR-IR Cut Filter Removable Mechanism)
MDC-8xxx
VDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux at F1.2(Sens-up x 256)
TDN 0.25 (Color) / 0.01 (BW) / 0.00001 / Lux at F1.2(Sens-up x 256)
(ICR-IR Cut Filter Removable Mechanism)
LENS
Min. ILLUMINATION
▶Specifications are subject to change without prior notice due to improvement
SPECIFICATION

MICRODIGITAL 13
FEATURES
1/3” Interline Transfer Type High Sensitivity Color CCD
700TV Lines
The combination of a 1/3” Interline Transfer Type High Sensitivity Color CCD
and DNR DSP provides an excellent resolution of 700 TV lines.
Min. Illumination
With an incredibly Minimum Illuminatio of Amazing 0.0001Lux can Capture
Good Images Even in Extremely Low Light Conditions and Related Noises
are Significantly Reduced by the Ultra Advanced DNR(Digital Noise Reduc-
tion) Technology.
D-WDR (Digital Wide Dynamic Range)
D-WDR is a powerful and ultra advanced technology that captures clear and
superior high Resolution pictures even where images appear dark because
there is a strong back light present.
High Light Compensation (HLC) Function
High Light Compensation Function is Especially Effective to Read the Number
Plate of the Vehicles in the Street or Parking Lot at Night Time. Especially
Users Can Adjust and Select the Special Required Area to Observe the Target
Object Under the Strong Spots of Light Exist.
3D Filtering Method of Newly Advanced DNR Functionn
Newly developed 3D filtering enhances Digital Noise reduction at low light
levels. 3D Filtering of the Video Signal Optimized the Signal to Noise ratio,
giving vastly improved low light visibility and a powerful Sens-Up function
(up to 258 times magnification).
DAY / NIGHT
The camera identifies whether it is day or night and automatically switches
to the appropriate mode, depending on its environment. By day, the camera
switches to color mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.
DPC (Dead Pixel Compensation [Max 512points])
When the camera becomes hot after operating a couple of days, white
spots are shown on the screen especially at low light condition and they are
recorded together with normal image. By using thise function, white spots
are removed and you can get clean images.
700 TV LINE
DAY / NIGHT
3DNR
1/3” IT CCD
HLC

14 MICRODIGITAL
DIGITAL ZOOM
Digital zoom available, OFF(x1) / ON(x2~x32) can be selected
IR SMART
It enables users to distinguish the indistinguishable images saturated by
IR LED.
Additional Functions
1. OSD - ON Screen Display menu with multi-Language support.
2. FreeArea Selectable function of BLC and MOTION DETECTION
3. Privacy Color Masking for 8 Area selection
4. Max 70% of Disk Saving Effect with Super DNR
5. Negative image Function
Weather proof IP66
MDC-6xxx , MDC-8xxx MODEL
External Focus & Focal Length Adjustment
77Ø, 88Ø Series (MDC-6220VTD-35H, 36H, 45, 48)
Dual(Surface / Flush) Mount Type Vandal Proof Dome Camera
MDC-8xxx MODEL
1. The unit is installed by two types of installation with flush or surface
mount. When the camera is installed with flush mount, the unit can be
installed into an existing two-gang junction box.
2. Surface or Flush Mounting using the supplied surface mount bracket.
C / CS Mount Lens Adjustable
MDC-4xxx MODEL
UTC Remote Controller
- Long distance controller.
- Menu can be adjusted without opening the camera case.
- It is of conveniently portable size.
IP66
SMART
IR
Vandal Proof
OSD
FEATURES

MICRODIGITAL 15
COMPONENTS
1. Camera
2. Manual
Width Height depth
64 58 90
wD
H
pypzGqhjr
}pklvGv|{ XY}Gkj
RT
|w
kv~u
slm{ ypno{
wv~ly
tlu|
mUn
pypzGqhjr
}pklvGv|{
|w
kv~u
slm{ ypno{
wv~ly
tlu|
mUn
myllG}vs{hnl
MICRODIGITAL

16 MICRODIGITAL
Over view
MDC-4220CDN / TDN
COMPONENTS
1 Lens protection cap
Cover the lens when not in use.
2 CS-mount lens adaptor
Attach the CS-mount lens here, and if you want to use C-mount lens, also please
attach C-ring to the CS-mount and then also
3 Back focus clamp screw
Loosen the clamp screw with a L-Wrench before adjusting the Back Focal length.
4 Camera mounting screw hole.
34
Back focus clamp
screw & Hole
1Lens protection cap
2CS-MOUNT Lens adaptor
Camera mounting screw hole.

MICRODIGITAL 17
COMPONENTS
Rear view
Specifications and Designs are subject to change without prior notice due to improvement
1Auto iris lens connector
Connection terminal for an auto iris lens.
2Video output terminal
Sends video signals and connects to the video input terminal of the monitor.
3Power lamp
Lights up when the correct power is supplied to the camera.
4OSD button
5 Power input terminal : Low voltage power connection.
6 AC Power Cord : Accept AC90~240V-50Hz/60Hz
MDC-4xx0/ 4xx1 MDC-4xx2
AC24V / DC12V AC230V
1
5
2 2
3 3
1
6
pypzGqhjr
}pklvGv|{XY}Gkj
RT
|w
kv~u
slm{ ypno{
wv~ly
tlu|
mUn
pypzGqhjr
}pklvGv|{
|w
kv~u
slm{ ypno{
wv~ly
tlu|
mUn
myllG}vs{hnl
44

18 MICRODIGITAL
1. Varifocal IR Bullet Camera
2. Cable for Extra Video
3. L-WRENCH
4. Screw for Installation
5. Manual
COMPONENTS

MICRODIGITAL 19
VBS-EXTRA
1 Lens
2 IR-LED / Heater (Option)
3 Zoom / Focus Lever
4 OSD Joystick (Option)
5 Cable Management Bracket
6 VBS-Extra for connecting to LCD (Option)
24
15
6
COMPONENTS
MDC-6220TDN-20 & 20H (65Ø)/24H(U)42(U)(75Ø)
3

20 MICRODIGITAL
W
D
L
MDC-6220 20 20H 24H(U) 42(U)
Dimension
Diameter 65ø 75ø
Width 81 89
Length 196 217
IR LED
& Heater
20pcs
IR LED
20pcs
IR-LED,
4pcs Heater
20pcs
IR-LED,
4pcs Heater
42pcs
IR LED
Power Consumption
Normal 140mA
IR LED ON 320mA 350mA 500mA
Heater ON X 460mA 480mA X
Dimension
▶Specifications and Designs are subject to change without prior notice due to improvement
COMPONENTS