Microlab A6352 User manual

Prior to first use, please read the manual carefully
Multimedia Speaker System
All other brand and product names are trademarks of their respective holders. Actual contents may differ slightly from those shown in print. All
specifications and designs are subjected to changes without any prior notice.
A6352
User Manual
www.microlab.cn
Microlab Electronics Co.,Ltd
Made in China
80-A6352-97-0001-01 2011-10-17

Caution:
ExplanationofGraphicalSymbols:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
ImportantSafetyInstructions
WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future
reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the
marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully
inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some
versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a
plug having one blade wide than the other). This plug will fit onto the power outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord
other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry
safety approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on,
kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,
receptacles and the point where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of
fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar
surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products including amplifiers that produce heat. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping,
splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, or
etc.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may
touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be
cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the
cabinet; spray onto the cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturers, as they may cause
hazards.
1
EN
2
English 2
80-A6352-97-0001-01 2011-10-17

Introduction
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the manufacturers’ instructions and should use a
mounting accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Un-use periods - The power cord of the device should be unplugged from the outlet during lightning
storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product
must remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
Aesthetically designed in unique pyramid shaped speakers. Layout in 2.1 subwoofer system for wider
sound spectrum and depth. Fits in most room types such as bedroom, kitchen or even your studies.
Featuring delicate woofer created for stronger bass and compact satellites for clear highs. Woofer is
directed downwards for improved bass effects. Cube shaped satellites for improved stereo effects.
Ideal for multimedia use, connects directly to any 3.5mm stereo interface. Comes with wired remote
control for quick volume control and 3D effect. Rotary volume dial for fine level adjustments.
Pyramid shaped 2.1 speaker system with built-in amplifier
Satellite speakers in cube box
3D sound effects
Wired remote control with volume dial and LED
Full audio spectrum performances, ideal for your favourite entertainment from Mp3, Mp4,
CD/DVD movies and digital playbacks
Specially designed downward woofer for better bass and resolution
Comes with 3.5mm stereo connection that connects to most media players and computers
Features












Packagecontents
A6352 subwoofer 1 pc
A6352 satellites 2 pcs
Wired remote control 1 pc
Power adapter 1 pc
3.5mm - 3.5mm audio cable 1 pc
User manual 1 pc
EN
3
EN
4
Function Instruction
Illustrations
FrontView
RearViews
Mp3 \ Mp4
Media pla yer
TV
PC or Notebook
Medi a
play er
CD\ VCD \ DVD
Blu-Ray p lay er
Wired r emote con trol
for mas ter volum e control
and 3D effects
Subwoofer
(rear )
Rightsatellite
(rear )
Leftsatellite
(rear )
ToAC
powersource
To 3.5mmstereo
playback source
Operation
Connection:
1. Connect the left and right satellites to the subwoofer rear panel to its respective 3.5 mm jacks.
2. For analog source, connect the playback source (Media player, VCD, DVD, or CD player) to the
3.5mm stereo jack (AUX INPUT). The 3.5mm - 3.5mm stereo cable is provided with the package.
3. Please place the satellites on extreme sides in front of the listening position.
4. Connect the AC power cord to the power supply source.
MASTER VO LUME
BASS
TREBLE
MASTER VOLUME
BASS
TREBLE
Leftsatellite Subwoofer Rightsatellite
Wired control
POWER DC I NPUT REMOTE A UX IN
SPK OUT
RL
80-A6352-97-0001-01 2011-10-17

Operation:
1. Turn on the AC power source and the speaker power from the rear panel power switch.
2. Activate the media player playback.
3. Adjust the volume on the media player, and speaker master volume to your preferred listening
level.
4. Use the wired remote control to adjust the master volume level.
5. For added effects, depress the 3D button on the wired remote control side. This will activate
the ambient 3D sound effects.
FrequentlyAskedQuestions(FAQ)
FrequentlyAsked Questions Answers
Check the media source own volume level, adjust to
about mid volume range and listen.
Adjust speaker’s own volume level to mid range and
listen
Check if the audio source is properly connected or
media player’s playback has started
Ensure volume is correctly set
Correct digital music format is used, e.g., Mp3
What are the products
supported?
Where to place this speaker
If the problem still exists, please contact the distributor or ask for professional service
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
Ensure playback track is of proper and higher bit rate,
too much compression will increase noise level
Static sound heard
Low volume output
No Sound
Sound is distorted
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
Any playback devices such as PC, Media
Players with 3.5mm stereo plug.
Operation
EN
6
TechnicalInformation
AMPLIFIER
Speakers
Interfaces
Total Power: 38 Watt RMS
Power distribution: 9 Watt x 2 + 20 Watt
Harmonic distortion: < 0.5 % 1 W 1 kHz
Frequency response: 50 Hz - 16 kHz
Signal/Noise ratio: > 80 dB
Separation: > 60 dB
Tweeter driver type: 2" x 2
Tweeter rated power: 10 Watt 4 ohm
Bass driver type: 4"
Bass rated power: 25 Watt 8 ohm
Output: 3.5mm stereo R & L jacks
Input: 3.5mm stereo AUX jack
© 2011 Microlab Electronics Co., Ltd All rights reserved.
- The end -
Intentionally left blank
EN
5
80-A6352-97-0001-01 2011-10-17