Microm TX3 Series User manual

LT-6773 Rev 0 February 2024 1
TX3 Cloud Gateway Installation Manual
TX3 Cloud Gateway Installation
Manual
The TX3 Cloud Gateway connects a TX3 system to the TX3 Vision Configurator as shown
below.
1. Installation
1.1. Items Required
• TX3 Vision Cloud Gateway unit (TX3-CLOUD-GATEWAY)
• Power Adapter (included with TX3 Vision Cloud Gateway unit)
• Ethernet cable
1.2. Preparation
1. Connect the Ethernet cable to LAN port 1 of the unit, ensuring it is connected to the
internet.
TX3 Vision
Internet
Router
TX3 Cloud
Gateway
2
ABC
3
DEF
1
5
JKL
6
MNO
4
GHI
8
TUV
9
WXYZ
7
PQRS
0
*
#
Ethernet
Card access
controller
2 card reader Elevator
Restriction Unit
Lobby Control Unit Card access
controller
1 card reader
EXISTING TX3
NETWORK
RS-485 Network
Ethernet

2 LT-6773 Rev 0 February 2024
TX3 Cloud Gateway Installation Manual
2. Attach the power adapter and cable to the unit.
Note: HDMI/DP/USB3.0 are intended for internal use only, not for customer use.
2. Activation
This process activates the TX3 Cloud Gateway, enabling it to work with your TX3 system.
1. Contact the Mircom sales department to purchase a TX3-Vision account and job site
license.
2. Log in to the TX3 Vision website (https://tx3vision.mircom.com/).
3. Once logged in, you will see the job site for which you have purchased the license.
4. Select the licensed job site.
5. Click on the icon.
6. From the drop-down menu click on Configuration.
7. Click the arrow on the right of the Gateway Panel.

LT-6773 Rev 0 February 2024 3
TX3 Cloud Gateway Installation Manual
8. Click on Command > Activate Device.
9. Enter the serial number of the gateway, which can be found on the gateway unit.
The purpose of the serial number is to identify and activate the device; it is in the format
XXXX-XXXX-XXXX and consists of both letters and numbers.
10. Click on Next.
11. Restart the device by turning off its power and then turning it back on by pressing the
power button located on the front of the device.

4 LT-6773 Rev 0 February 2024
TX3 Cloud Gateway Installation Manual
Wait for the device to be activated successfully.
12. Click Finished.