MICROMATIC GROWLER FILLER Quick start guide

INSTALLATION, USE & MAINTENANCE GUIDE
GROWLER
FILLER
VERSION 1.0
SAFETY
FIRST!
READ INSTRUCTIONS
COMPLETELY
Before getting started
please read this user
manual and at all times
follow the important
safety instructions.
GF-14515-G2

TABLE OF
CONTENTS
1 GENERAL INFORMATION........................................................................................................ 4-5
1.1 TERMS USED...................................................................................................................... 4
1.2 LIMITATION OF LIABILITY ............................................................................................... 4
1.3 COPYRIGHT PROTECTION............................................................................................... 4
1.4 CUSTOMER SERVICE........................................................................................................ 4
1.5 GUARANTEE CONDITIONS .............................................................................................. 5
2. BASIC SAFETY ........................................................................................................................ 6-7
2.1 INTENDED USE ................................................................................................................. 6
2.1.1 GROWLER ........................................................................................................................ 6
2.1.2 PRODUCT......................................................................................................................... 6
2.1.3 MISAPPLICATION .......................................................................................................... 6
2.1.4 SPACE REQUIREMENTS................................................................................................ 7
2.1.5 WORKING ENVIRONMENT............................................................................................ 7
2.2 CHANGES AND CONVERSIONS ...................................................................................... 7
2.3 SAFETY DEVICES .............................................................................................................. 7
3. TRANSPORT AND INSTALLATION........................................................................................... 8
4. STRUCTURE AND FUNCTION.............................................................................................. 8-11
4.1 INLET................................................................................................................................... 8
4.2 PROTECTIVE COVER......................................................................................................... 9
4.3 CYLINDER PLATFORM...................................................................................................... 9
4.4 CONTROL PANEL .............................................................................................................. 9
4.5 HOSE CONNECTIONS..................................................................................................... 10
5. TECHNICAL SPECIFICATIONS ............................................................................................... 11
6. CONTROL PANEL PRESETS.................................................................................................... 12
6.1 FILLING PROCESS........................................................................................................... 12
6.2 OPERATING STATUS....................................................................................................... 12
7. CONTROLS AND INDICATORS ..........................................................................................13-15
7.1 FILLING NOZZLE ............................................................................................................. 13
7.2 PROTECTIVE COVER....................................................................................................... 13
7.3 MAIN SWITCH.................................................................................................................. 13
|2 GROWLER FILLER, USE & MAINTENANCE GUIDE

7.4 CONTROL PANEL ............................................................................................................ 14
7.4.1 "STANDBY" SCREEN..................................................................................................... 14
7.4.2 "PRODUCTS" SCREEN.................................................................................................. 14
7.4.3 "GROWLER" SCREEN.................................................................................................... 15
7.4.4 "FILLING" SCREEN........................................................................................................ 15
7.4.5 "CLEANING" SCREEN................................................................................................... 15
7.4.6 "CLEANING" SCREEN................................................................................................... 15
8. INSTALLATION AND FIRST CLEANING................................................................................. 16
8.1 SWITCHING "ON" THE DEVICE ...................................................................................... 16
8.2 BASIC CLEANING ............................................................................................................ 16
9. FILLING A GROWLER ..........................................................................................................16-17
9.1 INSERTING/FILLING/REMOVING THE GROWLER...................................................... 16
9.2 PAUSING OR ABORTING THE FILLING PROCESS ...................................................... 17
10. CLEANING AND MAINTENANCE ....................................................................................17-19
10.1 GROWLER DEDICATED FOR CLEANING..................................................................... 18
10.2 CLEANING .................................................................................................................18-19
11. CONFIGURATION ..............................................................................................................20-27
11.1 REPORTING BUTTON.................................................................................................... 20
11.2 EVENT MEMORY BUTTON ........................................................................................... 20
11.3 SETTINGS BUTTON ...................................................................................................... 21
11.3.1 GENERAL BUTTON .................................................................................................... 21
11.3.2 WORKFLOW BUTTON ................................................................................................ 22
11.3.3 PRODUCTS BUTTON.................................................................................................. 22
11.3.4 DISPLAY BUTTON ...................................................................................................... 22
11.3.5 OPERATION BUTTON ................................................................................................ 23
11.3.6 CLEANING BUTTON................................................................................................... 23
11.3.7 BOTTLES BUTTON..................................................................................................... 24
11.3.8 TEXTS BUTTON .......................................................................................................... 24
12. PROGRAMMING DIFFERENT SIZE GROWLERS............................................................25-27
13. TROUBLESHOOTING ............................................................................................................. 28
14. WARRANTY ............................................................................................................................. 29
| 3MICROMATIC.COM SUPPORT [phone]

The contents of these operating instructions enable safe and proper handling of the Growler
Filler. Read the operating instructions completely before operating the lling machine. And
always keep the operating instructions within easy reach of the Growler Filler. The illustrations
in this manual may be different from the actual device.
1.1 TERMS USED
1.2 LIMITATION OF LIABILITY
The manufacturer accepts no liability for:
• Damage caused by incorrect operation
• Inappropriate use
• Inadequate maintenance or cleaning
• Failure to observe the technical documentation
• Technical modications by the user
• Use of non-approved spare parts
1.3 INTELLECTUAL PROPERTY AND COPYRIGHT PROTECTION
All rights reserved. Any - including, but not limited to - duplication, dissemination and other
uses of the texts, graphics or other representations without the consent of the manufacturer.
Contact Information:
Micro Matic USA, Inc.
2364 Simon Court
Brooksville, FL 34604
1.4 CUSTOMER SERVICE
Micro Matic USA, Inc.
2386 Simon Court
Brooksville, FL 34604
[phone]
1
DANGER
Causes serious injury or
death if not observed.
WARNING
Can result in serious injury
or death if not observed.
ATTENTION
May cause minor or
moderate injury.
NOTICE
Useful information or
general information.
GENERAL
INFORMATION
|4 GROWLER FILLER, USE & MAINTENANCE GUIDE

1.5 GUARANTEE CONDITIONS
The operator is obliged to:
• Meet local laws and regulations for the bottling of beverages
• Perform regular maintenance
• Perform regular rinsing and cleaning operations
| 5MICROMATIC.COM SUPPORT [phone]

2.1 INTENDED USE
The lling device is used for lling containers, hereinafter referred to as "growlers". Beverages
hereinafter referred to as "product". The operational safety of the lling device is only ensured
when used as intended. The use is only considered as intended if:
• The limits of applicability are observed.
• Carry out cleaning and maintenance according to the operating instructions.
• Cleaning and maintenance intervals according to the operating instructions and upon
request of the lling device.
The lling device is intended only for the processing of low-risk foodstuffs. Installation of the
growler ller is after prior installation by professionals for commercial use.
NOTE: When using the machine, be sure to use adequate hygiene before, during and after the
operation. Perform the cleaning and disinfection as described in chapter 10.
2.1.1 GROWLER
A growler is used for transporting or storing beverages. Suitable container, which corresponds
to the limits of applicability. These include:
• Drink Growlers
• Carafes
NOTE: Do not use any other vessels or growlers than those in these operating instructions.
NOTE: Before using the growlers, be sure that they are not cracked, chipped, etc.
NOTE: Danger of damage to the seal of the inlet by the use of growlers with low wall thickness
or sharp-edged growler opening. Leaks, deformation, and breakage of the growler can result.
• Only use growlers with a thick wall thickness.
• Make sure that the growler opening is completely on the lling seal.
• Visual inspection with the protective cover closed.
2.1.2 PRODUCT
The lling device is operated with beer. As soon as the product supply is empty, no liquid may
ow through the hose line. The system used must be checked by a qualied installer for leaks.
NOTE: The lling device may only be used with the instructions given in the operating instructions.
2.1.3 MISAPPLICATION
The lling device is intended for commercial and not for industrial use! No growlers or
beverages other than those described in the operating instructions may be used with the
lling device. The bottom and opening of the growler must be perpendicular to their vertical
axis. The Filler is not intended for use in conjunction with any high-risk foods. The use of
damaged, cracked or thin-walled growlers or growlers with a sharp-edged opening is not
permissible. The use of corrosive, oily, strongly acidic, caustic or other aggressive substances
(non-food) is prohibited. Filling other liquid foods other than those described in the operating
instructions is not permitted. Filling of gaseous substances (other than CO2) is prohibited.
2BASIC SAFETY
|6 GROWLER FILLER, USE & MAINTENANCE GUIDE

2.1.4 SPACE REQUIREMENTS
Make sure that:
• There is enough room to open the protective cover.
• There is enough room at the rear so that the hose lines can be connected.
2.1.5 WORKING ENVIRONMENT
The work environment of the unit must meet the required country and product-specic
requirements. Install the device so the protective cover can be opened easily and the hoses
are not kinking. The lling device is intended exclusively for use in well ventilated interior
spaces. The room temperature must be between 32 and 90˚F.
NOTE: Regularly clean the device according to the instructions in this manual to avoid
hygienic deciencies. Be careful when using the unit and the following hygiene requirements:
• Regularly clean the Growler lling nozzle and keg coupler. Make sure that the device is free
of product residues, mold, and bacteria.
• Use only clean growlers with the device.
2.2 CHANGES AND CONVERSIONS
Alterations and conversions of the lling device, which are not found in the instructions are
expressly prohibited. In the case of unauthorized changes, without explicit permission from
the manufacturer, will void any warranty claim.
2.3 SAFETY DEVICES
Protective Cover
The lling region of the lling device is provided with a protective cover. The protective cover
is equipped with two independent Reed Contacts, through which the lling device recognizes
when the protective cover is closed. Filling, cleaning, and ushing are only available when the
protective cover is closed.
WARNING
Risk of dangerous accumulations of carbon dioxide (CO2) in conned spaces or containers.
Carbon dioxide can be toxic at elevated concentrations.
• Ensure that the device is installed only by qualied personnel.
• Ensure adequate ventilation of the rooms in which the unit is installed and operated.
• Ventilate cabinets or areas below the unit. CO2 will collect at the lowest point rst.
DIMENSIONS MEASUREMENT (CM/INCHES)
Height 63 cm / 24.8"
Width 21 cm / 8.25"
Depth 40 cm / 15.74"
GROWLER MEASUREMENT (CM/INCHES)
Growler Diameter <12cm / 4.75"
Height 25 to 33cm / 9.84 to 12.99"
| 7MICROMATIC.COM SUPPORT [phone]

The lling unit is delivered in a cardboard box or air-packed in foam. It is recommended to
use the packaging of the ller for later transport and storage. Do not operate the unit if it is
damaged. Immediately contact Customer Service.
ITEM DESCRIPTION
1Main switch
2Protective cover
3Filling nozzle
4Growler platform
5Control panel
ITEM DESCRIPTION
6Growler seal
7LED lighting
8Product outlet
9Drain opening
4.1 INLET
Functionality
The spring-loaded lling nozzle activates a micro switch when a growler is inserted between
inlet and cylinder, and thus allows lling, cleaning, and ushing. The seal prevents the escape
of gas or liquid from the growler. The LED lighting serves as a light source and shows by
colored lighting. Operation status of the lling device is indicated by the LED lighting.
3TRANSPORT AND INSTALLATION
4STRUCTURE
AND FUNCTION
8
7
6
6
1
23
4
5
8
9
7
|8 GROWLER FILLER, USE & MAINTENANCE GUIDE

4.2 PROTECTIVE COVER
The transparent protective cover prevents access to the growler during the lling,
cleaning or ushing, and is designed to protect the user.
Construction
Operation of Cover
The protective cover can be pivoted upwards until it stops. Once the lid is open, a
growler can be placed inside. During the lling process, the protective cover must be
closed. The device recognizes that the cover is closed.
ITEM DESCRIPTION
1Protective cover
2Independent reed (magnetic) contacts (right / left)
4.3 CYLINDER PLATFORM
The growler platform serves as a base for a growler or an adapter.
Construction
Functionality
A pneumatic cylinder under the growler rack lifts the growler or the cleaning adapter,
and clamps it between the growler platform and the lling nozzle.
ITEM DESCRIPTION
3Platform
4.4 CONTROL PANEL
The control panel is a color touch screen display. It displays the operating status of
the unit and allows for input during operation.
Construction
Functionality
On the control panel, you are able to access the lling, rinsing or cleaning features.
The control panel displays process steps, error messages, and settings.
ITEM DESCRIPTION
4Touchscreen
| 9MICROMATIC.COM SUPPORT [phone]

4.5 HOSE CONNECTIONS
The hose connections are used to connect the tubes to the lling unit.
Functionality
The supply lines for the product, water and gas are connected to the lling
device. The drainage line is used for the removal of excess growler contents, or
it can be used to drain cleaning uid when used with a quick release. Optionally,
compressed air can be used for the lift cylinder.
Pressure to the Kegs (Beers)
Typically, 12-15 PSI
CO2Growler Purge Pressure
1 PSI higher than the beer
pressure (15-17 PSI)
Pneumatic Pressure (Platform Lift)
25-30 PSI Typically
Primary Pressure
40-50 PSI Typically
Tube Color Reference
Beer 1 = Red
Beer 2 = Green
Beer 3 = Orange
Beer 4 = Brown
CO2 Purge = Yellow
CO2 Cylinder = White
Drain = Black
Drain = Double Black
Water = Blue
942B
Primary Regulator
8033
Secondary
Regulators
7485BS
Keg Couplers
Attach to CO2 Cylinder
1750352C
Water Regulator
(Included with Growler Filler)
751-019
Gas Distributor
GF-14515-G2
Growler Filler
(Back Cover Removed)
|10 GROWLER FILLER INSTALLATION, USE & MAINTENANCE GUIDE

MECHANICAL/ELECTRICAL
Designation Growler Filler
Type Growler Filler 4 product V1
Power Standby 6W - Max. 75W
Operating Voltage 120VAC
Lift Cycle Max. 65 PSI
Filling Pressure Max. 43 PSI
Weight (when the growler is empty) 44 LBS
APPLIED PRESSURES PRESSURE (PSI)
Product Max. 43 PSI
Water Max. 43 PSI
CO2Max. 43 PSI
Lift Cycle Pressure
(must be dry and oil-free) Max. 65 PSI
5TECHNICAL SPECIFICATIONS
| 11MICROMATIC.COM SUPPORT [phone]

6.2 OPERATING STATUS
The current operating status of the lling device is indicated by the LED ring around the
lling nozzle default settings. List Operation Indicators:
6.1 FILLING PROCESS
The lling process consists of the following process steps:
STATUS LED FREQUENCY COLOR
Standby On Slow White
Ready On Slow Green
Error Flash Fast Red
Filling On Slow White
Filling Pause Flash Medium Yellow
Filling End Flash Fast Green
Rinsing On Slowly Blue
Cleaning On Medium White Blue
DESCRIPTION DURATION
Lift Growler 2.0 seconds
Gas Flooding 3.0 seconds
Pressure Build-up 3.0 seconds
Filling Timeout (Fill%) 240.0 seconds
Blow Out Filling Nozzle 2.0 seconds
Vent Gas 10.0 seconds
6CONTROL PANEL PRESETS
|12 GROWLER FILLER INSTALLATION, USE & MAINTENANCE GUIDE

7.1 FILLING NOZZLE
The LED lighting around the lling head indicates the operation status of the unit using
colors and different ashing frequencies.
7.2 PROTECTIVE COVER
The protective cover can be opened by lifting using the handle. During the lling process,
the protective cover must remain closed. If the protective cover is opened during lling or
cleaning the process will be stopped. Pressure will be vented from the growler.
7.3 MAIN SWITCH
The main switch can turn the lling device on ( "I") and off ( "O")
7CONTROLS AND INDICATORS
| 13MICROMATIC.COM SUPPORT [phone]

7.4.1 "STANDBY" SCREEN
While the device status is “Standby” the lling device is
inactive. Touch the Control panel to access the operating
status to the "product" screen.
As part of the setup conguration, a standby timeout is
dened. After the standby time has passed the device will
change from the operating menus to the standby menu. The
default setting for Standby timeout is 10 seconds.
7.4 CONTROL PANEL
The control panel and indicators displayed can be
customized to the products and growlers used.
Colors, text, and images may differ from the gures.
This gure represents an example.
7.4.2 "PRODUCTS" SCREEN
The images of the products are congurable.
The images to the right are examples of the default.
CLEANING BUTTON
The Cleaning button opens the "cleaning" menu
on the control panel. Then there is access to
choose between "rinse" and "clean".
PRODUCT BUTTON
The Product button selects the pictured product for the
next lling and opens the screen "Growlers."
Cleaning screen
The default passcode is "12345"
MAIN MENU
Hold the top red bar for 10 seconds to enter the
conguration menu.
|14 GROWLER FILLER, USE & MAINTENANCE GUIDE

7.4.3 "GROWLER SCREEN"
The user can select which growler they
are going to ll.
[X] BUTTON
The button [X] cancels the selection
and opens the previous screen.
7.4.4 "FILLING" SCREEN
"START" BUTTON
This button will start or pause the lling.
"STOP" BUTTON
This button will end the lling process.
7.4.5 "CLEANING" SCREEN
[X] BUTTON
The button [X] cancels the selection and opens the previous screen.
RINSE BUTTON
Launches rinsing
Displays the current ushing
Stops the ush
CLEAN BUTTON
Opens the "cleaning" screen.
7.4.6 "CLEANING" SCREEN
[X] BUTTON
The button [X] cancels the selection and opens the previous screen.
PRODUCT LINE SELECTION
The Product Line Selection eld selects the line for the cleaning process. Multiple
selections are possible. An activated selection eld includes a check inside the frame.
"START" BUTTON
The Start button starts the cleaning process and allows the line cleaner to pause as
often as desired during the process.
"STOP" BUTTON
The Stop button stops the cleaning process.
| 15MICROMATIC.COM SUPPORT [phone]

After the device is successfully and connected, the installer will perform the
initial conguration.
8.1 SWITCHING "ON" THE DEVICE
Engage the main switch to turn the power on ( "I").
8.2 BASIC CLEANING
Clean the growler ller before the initial start. Clean the exterior of the unit daily.
8INSTALLATION AND FIRST CLEANING
Follow these steps to ll a growler with product. Make sure that the growler ller
is properly set up and mounted.
NOTE: GROWLER FILLER IS FACTORY PROGRAMMED FOR STANDARD
64 OZ GROWLERS
9.1 INSERTING / FILLING / REMOVING THE GROWLER
Proceed as follows to place the growler for the lling process:
1. OPEN THE PROTECTIVE COVER
a) Swing the protective cover upward until it stops.
2. POSITION THE GROWLER
a) Place the growler in the middle of the growler platform.
b) When the growler is too short to reach the lling head, use an adapter (optional -
contact Micro Matic sales) to raise the growler allowing it to create a seal with the
lling head.
NOTE: Pay attention to make sure that the growler is stable on the platform. If the
growler is not stable, it could damage the unit or the growler. Verify that protruding
handles, straps, and fasteners, do not stop the protective cover from closing.
3. CLOSE PROTECTIVE COVER
a) Swing the Protective Cover down until it stops.
4. PRESS THE TOUCH SCREEN "START"
a) Follow screen prompts
5. REMOVING THE GROWLER:
a) Open the protective cover completely.
b) Remove the growler.
c) Close the protective cover.
9FILLING A GROWLER
|16 GROWLER FILLER, USE & MAINTENANCE GUIDE

9.2 PAUSE OR CANCEL FILLING
You have the option to pause or cancel the lling prematurely.
a) Press the play button to pause the lling process.
b) Press the pause button to resume the lling process.
WARNING
Lack of hygiene can occur by not properly cleaning the device using approved cleaning
solutions for cleaning the product lines and the exterior of the unit. If the product over ows,
then areas that have been impacted by the spill should be cleaned immediately.
• Use only for cleaning and disinfecting the device appropriate and recommended by the
manufacturer cleaning / disinfecting agents
10 CLEANING AND MAINTENANCE
Cleaning Canister
The cleaning canister (sold separately) serves to provide detergents for the cleaning
procedure.
Functionality
The cleaning container uses CO2 to push water and cleaning agent into the lling device
via the product line. Remove the lid to ll the cleaning container with the appropriate
cleaning chemical solution.
Cleaning Chemicals
To clean the growler ller, you need different cleaning chemicals for the following areas:
• Cleaning the product lines and growler ller
• External cleaning of surfaces
Cleaning the Product Lines
A caustic solution is suitable for the cleaning of the product lines. The detergent in liquid
form is added to the water in the cleaning canister.
The Growler Filler has two functions for cleaning:
• Rinsing function - ushes unit with clean water.
• Cleaning function - ushes the unit with a caustic cleaner.
When cleaning the exterior, use a scratch-free cloth and a disinfectant for beer
dispensers, which complies with the national hygiene standards.
CLEANING CANISTER
with valves installed
Part No. 201-420
CLEANING CHEMICAL
Part No. MM-B68
| 17MICROMATIC.COM SUPPORT [phone]

Cleaning Button
The Cleaning button opens the "cleaning" screen.
After 14 days, a notication will appear that the unit needs to be cleaned.
10.1 GROWLER DEDICATED FOR CLEANING
A cleaning growler and rinsing growler are needed for the rinsing and cleaning.
Designate a growler that will only be used during cleaning and a growler that
will only be used during rinsing.
Inserting cleaning growler:
1. OPEN PROTECTIVE COVER
2. POSITION THE CLEANING GROWLER
3. CLOSE PROTECTIVE COVER
DANGER
Risk of electric shock when preforming maintenance or repairs to the unit in
areas where electrical components are present. Contact with electricity can
cause serious injury.
• Turn off the power at the main switch ("O").
• Disconnect the device from the power supply by unplugging the unit from
the wall outlet.
10.2 CLEANING
Proceed as follows to perform the cleaning process.
Tools Required:
• Cleaning Canisters
NOTE: It is suggested to have a dedicated canister for water only, and a dedicated canister
with cleaning solution.
• Detergent
• Clear glass growler designated for cleaning
NOTE: Use proper personal protective equipment when using the cleaning chemicals.
Follow all directions provided by the manufacturer on proper handling of materials.
Cleaning Instructions
1. FILL CANISTER WITH WATER
a) Fill the cleaning container with lukewarm water.
b) Replace lid on cleaning canister.
2. START CLEANING PROCESS
a) Press on the touch screen to open the products menu. Touch water faucet icon in the
upper left corner of products screen.
|18 GROWLER FILLER, USE & MAINTENANCE GUIDE

b) Press the clean button to open the options for cleaning.
c) Select the check box of the line to be cleaned. Multiple selections are possible.
3. FLUSH THE FILLING DEVICE WITH WATER
a) Couple keg couplers to the cleaning canister lled with luke warm water.
b) Engage couplers to ll the canister with CO2
c) Press the “Start” Icon on the control panel.
d) Allow water to ush all of the beer out of the lines.
4. ADD CLEANING CHEMICAL TO WATER IN CANISTER
a) Partially Fill the cleaning canister with lukewarm water, add (3) measuring caps of
3.33oz of Micro Matic Beer Line Cleaner per gallon.
b) Replace lid on cleaning canister.
5. SOAKING THE LINE WITH BEER LINE CLEANER
a) Tap the cleaning canister with the keg couplers.
b) Press the start icon on the control panel and ll all of the lines with Beer Line Cleaner.
c) Press the pause icon once the lines have been lled with Chemical. Wait 20 minutes
while the chemical soaks in the line.
d) After the chemical has soaked in the line for 20 minutes, press the play button to ush
the unit with chemical for another 10 seconds.
e) Carefully remove the cleaning growler and empty the contents. The growler contains
caustic, and care must be taken when disposing of the contents.
f) Rinse the growler out with cool clean water.
g) Replace the growler on the platform.
i ) Remove cleaning canister and replace with canister lled with rinse water.
h) Engage the keg couplers on the cleaning canister lled with water.
j) Activate the cleaning process again and allow the device to ush water though the
system for 1 minute. Emptying growler is necessary.
k) Press the “Stop” Icon.
l) Empty the contents of the growler and rinse out the growler.
m) Place the growler on the platform select all of the products. Press the start icon and
ll the growler with water.
n) Press the “Stop” icon and remove the growler. Use pH paper to test the pH of the water.
If the level is not below 8, repeat the rinse for 2 minutes. Continue to repeat until pH is
below 8>.
6. FILLING PRODUCT LINES
a) Select all of the product lines.
b) Untap all of the keg couplers from the water lled canister and tap the couplers to the
corresponding keg.
c) Press the “Start” icon and push the water out of the product lines. Once all of the
product lines have been cleared, press the stop icon.
d) Resume lling growlers in the regular manner.
| 19MICROMATIC.COM SUPPORT [phone]

11CONFIGURATION
HIDDEN MENU
Using the main menu, operators can change the default settings that to better control the
lling process.
• Press the red header on the products menu for over ten seconds.
• Then a passcode entry screen will appear. The factory default pass code is 12345. The
changing of settings should only be done by qualied personnel.
11.1 REPORTING MENU
This screen shows how many growlers of each product have been lled.
The count can be reset as desired.
11.2 EVENT MEMORY BUTTON
The event memory button opens the "Event log" screen on the control panel:
The "event log" screen displays a history of all completed tasks on the device. Activities
such as cleaning and lling can be selected to view additional details. Up and down
scrolling by arrows is possible.
|20 GROWLER FILLER, USE & MAINTENANCE GUIDE