Micron IM4TS User manual

7-Inch Touch Screen Monitor
IM4TS /IM4TSW
MICRON HOME INTERCOM SYSTEMS
USER MANUAL

USER MANUAL
Micron 7 Inch Touch Screen Monitor
IM4TS – Touch Screen
IM4TSW – Touch Screen – WiFi
Informa�on & specifica�ons contained in this manual maybe changed for the benefit
of product development and improvements.

I
Table of Contents
1. Features and Functions...........................................................................................2
2. Packing Contents.....................................................................................................2
3. Indicators and Connection details ..........................................................................3
3.1 Front & Side ..................................................................................................3
3.2 Rear & Bottom ..............................................................................................4
4. Connection Diagram ...............................................................................................5
4.1 Wiring Diagram .............................................................................................5
5. Monitor Installation ................................................................................................6
6. Operation Description.............................................................................................7
6.1 Main Screen ..................................................................................................7
6.2 Visitor Call .....................................................................................................8
6.3 Monitor Function..........................................................................................9
6.4 Multimedia....................................................................................................9
6.4.1 Image & Video Storage .........................................................................9
6.4.2 Image & Video Review..........................................................................9
6.4.3 Voicemail Function..............................................................................10
6.5 Intercom Function.......................................................................................10
6.6 Motion Detection –SD Card Required........................................................11
6.7 Scheduled Do Not Disturb Function ...........................................................12
6.8 Screensaver Function..................................................................................12
6.9 Customization of MP3 melody –SD Card Required....................................13
7. Setting Page...........................................................................................................14
7.1 Specifications ..............................................................................................16
8. WiFi Connection (IM4TSW Only) ..........................................................................16
8.1 Adding a Device –WIFI ...............................................................................16
8.2 Control the Monitor Through the APP........................................................18
8.3 Call Forwarding Latency..............................................................................19
9. Hardwired Connection (IM4TSW Only) ................................................................19
9.1 Adding a Device –Hardwired......................................................................19

1
WARNING AND CAUTION
Please make sure to follow the instructions to prevent any product danger or product
failure.
Do not attempt disassemble or repair. This product requires a
qualified technician
Do not install the product in a hot or humid place
Do not place heavy objects on the product
Do not use solvents or detergents to clean the screen.
Do not attempt any connections whilst the power to the system is on
Make sure to clean the monitor with a dry cloth to prevent any
breakdown or electric shock
If the product produces excessive noise or smoke, immediately turn
off the power, and then contact your service technician
Make sure that dust does not build up on the product
Make sure to prevent foreign objects from entering the product
Do not install in direct rays of the sun or heating devices
Install the product on a flat and stable surface
Do not remove the micro SD card (if Fitted) when recording, this
generally will cause loss of data

2
1. Features and Functions
•7” capacitive touch screen monitor,1024*600 resolution
• 1080P/720P/CVBS display & record.
• Built-in WiFi module supports local and remote control (IM4TSW only)
• GUI menu support sliding operation
• Connect up to 2 door stations, 1 master monitor + 3 slave monitors
• Control of automatic gates or Locks (will require additional power supplies)
• Inner flash memory, support micro SD card
• Auto & manual video/picture recording
• Monitor to Monitor Intercommunication
• Support call forwarding function
• Support motion detection from door station
• Scheduled do not disturb function
• Screensaver function (date & time display in standby mode)
• Selective 16 ringtonemelodies, 1 x 1 customized MP3 melody Via SDCARD & PC
• Adjustable ringtone, volume & talking volume
• Adjustable brightness, color and contrast
2. Packing Contents

3
3. Indicators and Connection details
3.1 Front & Side
NO.
Part Name
Description
1
Power Indicator
White led -- Monitor power is on
2
Do-not-disturb/Leaving
Mode Indicator
Purple led Solid -- Mute function is enable
Purple led flashing -- Leaving mode enable
3
Message Indicator
Green led -- New Picture taken
4
Micro SD Card Slot
Micro SD card slot
5
Screen
7” digital touch screen
6
Microphone
Microphone to talk to the door station
7
Power Switch
On/Off Switch for Monitor

4
3.2 Rear & Bottom
NO.
Part Name
Description
8
LAN
Connection for home router (IM4TSW only)
9
CCTV Input
Connection for CCTV 1 & CCTV 2
10
Video Input
Connection for door station 1 & door station 2
11
Intercom Output
Connection In for additional Monitor
12
Intercom Input
Connection Out for additional Monitor
13
Speaker
Monitor Specker
14
Relay Output
Normally Open Relay output
15
DC Power Input
Power supply input
16
HOOK
NOT USED - Technical connection
17
CCTV Output
NOT USED –Video Output

5
4. Connection Diagram
4.1Wiring Diagram
Wiring Example of Intercom with one monitor and optional 2nd door station.

6
Wiring Example of Intercom with one monitor, 2 Slaves and optional 2 door stations.
MAXIMUM CABLE DISTANCE IS 100 METERS
Note：
1. Normally Open Contact can only switch 100mA and only operates from the gate
unlock button.
5. Monitor Installation
Standard monitor installation height is about 1,500mm where screen center is at eye
level. The wall bracket centre is 1,450mm above ground level.

7
6. Operation Description
6.1 Main Screen
Touch the screen anywhere in standby mode, the main page will appear displaying
the below icons.
※Icon Definition
Icon
Description
Monitor/watch through the door station
Picture Memory
Monitor to Monitor Intercommunication
Enter the main setting screen
Turn the monitor off

8
6.2 Visitor Call
When door station calls, the visitor’s image will be displayed on the monitor screen
you can press icon to talk with the visitor. Press it again to terminate the talk.
※Icon Definition
capture a picture
record a video
switch between door stations
talk
release the electronic lock
call transfer manually
adjust display parameters(brightness/color/contrast) and volume
open the automatic door
back to main screen
During the conversion with the door station:
• You can record a video or capture a picture from the calling door station
automatically depending on the system setting.
• You can press icon to switch to another door station, if fitted and the
current conversation will be terminated.

9
• You can press icon to transfer the current call to other monitors.
6.3 Monitor Function
When you press the icon on main screen, the system will enter monitor
mode, and will show image from the corresponding door station.
Note:
• The icon will be disabled in monitor mode.
6.4 Multimedia
6.4.1 Image & Video Storage
The monitor can record images and videos with inner flash storage.It also supports
mirco SD card. Max 128GB **Not Supplied**
When the memory is full, the newest picture/video will automatically overwrite the
oldest picture/video.
6.4.2 Image & Video Review
Press icon on main screen, you can review the pictures and videos that have
stored in memory. The picture/video list with a red circle means that the picture /
video has not yet been viewed. You can press the corresponding list to review the
saved pictures /video.

10
Note:
• Micro SD card must be formatted by the monitor to function correctly.
• Micro SD card is excluded in the package.
• The videos include both the video recorded during monitoring and recorded during
motion detection.
6.4.3 Voicemail Function
Press icon on main screen and enter Voicemail setting page, press
icon , and then you can record and review messages.
Remark:
• The monitor support up to two voice messages for vistitor. When full, the newest
message will automatically overwrite the oldest message.
6.5 Intercom Function
Press the icon on main screen, choose the monitor you want to call, and then
press icon to start the call, and then you can talk with the corresponding
monitor if the called monitor answers the call. The talking and ringtone volume for
intercom can be adjusted.

11
6.6 Motion Detection –SD Card Required
The monitor supports motion detection from door station. You can enable/disable
the motion detection function, set adoor station as default for motion detection, set
the sensitivity and frame rate and the time range of motion detection in
setting page. Via The Micron Intercoms + APP you can enable/disable motion
detection notification. If enabled and motion is detected, you will receive a motion
detetction message on your phone.

12
6.7 Scheduled Do Not Disturb Function
The monitor supports scheduled do not disturb function. You can enable/disable the
mute function and set the time range of do not disturb mode in setting
page.
6.8 Screensaver Function
The monitor supports screensaver function (date &time display in standby mode).You
can enable / disable screensaver function in setting page.

13
6.9 Customization of MP3 melody –SD Card Required
The Intercom supports 16 preprogrammed melodies and will support a customized
an extra MP3 melody for Door 1, Door 2 and Internal intercommunication by SD card.
You can customize MP3 as the following:
1. Prepare a SD card and format it;
2. Open the SD card on your computer, and create a new folder called melody;
3. Open the melody folder, and create folder CAM1, CAM2, Intercom;
4. Copy your music to the CAM 1 or CAM 2 or Intercom folder.
5. Install the SD card into the Monitor in the SD Card Slot;
6. Open the setting page and open the setting page, the device will import
music automatically;
7. Then you can choose the new melody you add, and the melody will be named
MP3.
Note:
Please notice the melody must be in MP3 or WAV format;
The Ring time of device is 5/10/20s, so the melody should have no prelude;
You can add a piece of music separately in DOOR 1 and DOOR 2 and Intercom.
If the SD card is not recognized, please format it on the device.

14
7. Setting Page
Press the icon on main screen or slide the main page to the right or left,and
then the screen will enter main setting page.
•In the date setting page,you can set the date & time of the monitor and
select the date format.
• In the mute setting page, you can enable/disable the mute function and
set the time range of the do not disturb function.
• In the General setting page, you can set the language of the monitor and
restore the monitor to factory default. Date and time and the room station number
will not be reset.You can also enable/disable the screensaver function.You can set the
unlock time for door1, door2, and the gate(1s/3s/5s/7s/9s). You can also disable the
inputs like DOOR 2/CCTV1/CCTV2 channel so they will not appear on the preview
page of the monitor or the APP.
• In the Voicemail setting page,you can select one voicemail for visitor as
the message to play when selecting the [Leaving] mode. You can also delete all
voicemails for visitor.You can also record and review voice message.

15
• In the WiFi setting page, you can turn WiFi on or off and set call
forwarding latency for the monitor,you can also reset WiFi settings
• In the Record setting page,you can turn monitor record on / off and select
picture or video record mode.
• In the Melody setting page, you can set the ring tone for Door station 1
and Door station 2 and also set ring time.
• In the Memory setting page, you can delete all pictures or videos in the
internal Flash memory of the monitor and also on the Micro SD card if fitted. You can
also copy all the saved pictures/videos in the Flash memory to the micro SD card .
You can also format micro SD card.
• In the Motion detection setting page,you can turn Motion detection on or
off, set one camera as default for motion detection,set frame rate,motion detection
sensitivity and time range of motion detection. Enable or disable the motion
detection notification.
• In the Address setting page, you can set the intercom address of the
monitor. The address of two monitors cannot be the same in one system.
Remark:
• To record and review voicemail message, please see 6.4.3.
• If you want to use voicemail function normally,you should make sure that the mode
of monitor is “Leaving” and the call forwarding latency should be off.
• Once a moving object is detected, the monitor will record a video automatically(the
duration of recording video depends on the frame rate). When monitoring door
station or CCTV, motion detection will pause until the monitoring ends.

16
7.1Specifications
Category
Specification
Input power
DC: 15V
TFT LCD
7 inch digital TFT LCD
LCD resolution
1024(RGB) x 600
Supported video input signal type
1080P / 720P / CVBS
Connection with door station
Support two 4-wire door stations
Connection with extension monitor
Support 3 extension monitors
Connection with CCTV
Support two 2-wire CCTV input
Memory capacity
Storage: 15M for image & 50M for video
Micro SD card: Max Capacity 128G
Dimensions (mm)
222(W) x 154(H) x 15(D)(without wall bracket)
8. WiFi Connection (IM4TSW Only)
8.1 Adding a Device –WIFI
The monitor can connect to the Internet by WIFI to your router / modem. The WiFi
settings for the monitor are programmed from the mobile device which has the
Micron Intercoms + APP installed on it. The APP is available from the Play store for
Andriod or the App Store for IOS.
※To add a new device
1. Reset WiFi setting in the monitor before starting any configuration. Your Smart
Device needs to be connected to the home WiFi;
2. Download and open the Micron Intercoms + APP, press the “+” icon;
3. Scan the UID /QR code on the Monitor WiFi page;
4. Click next, and choose the SSID (name) of home router and enter the Home Wi-Fi
password

17
5. Click next, and then the APP will configure the device through sound waves；
6. Waiting the device online;
7. After the device configure successfully, you can set device name and save.
① ② ③
④ ⑤ ⑥
Note:
• The home router must be connected to external networks if the call from door
station needs to be transferred to your mobile phone;
• In order to ensure normal connection, all permissions of the APP need to be
allowed;
• The UID / QR Code of each monitor are unique;
※Add a second user to a connected device