Micronic Tracxer TS201 User manual

GETTING STARTED WITH
TRACXER
CODE READER
TS201
PD801201

A CheCk Components
Before installing the Tracxer Code Reader TS201 be sure that you have all required items. Check the item
list below!
• Tracxer Code Reader TS201;
• Single tube holder for 96-format tubes (already mounted);
• Serial-to-USB converter cable;
• CD-ROM with User Manual and Micronic Warranty Statement;
• This current document “Getting started”.
If you do not have one of the items above, please contact the Micronic helpdesk by sending an email to:
[email protected]
B InstALLAtIon
1 Installation conditions
Place the Tracxer Code Reader TS201 on a clean, dry, stable and horizontal surface.
Do not use the Tracxer Code Reader in an area with the following characteristics: high
concentrations of dust, high humidity, explosion danger or toxic chemical storage.
2 Installation
• Connect the Tracxer Code Reader TS201 to the computer’s USB port;
• Wait until the computer recognizes the reader;
• Open the program in which you want to use the scanned data.
!
C operAtIng trACxer Code reAder ts201
1 Operation
• Place a 2D Data-Matrix coded tube (any tube size in 96-, 48- or 24-well format) in the tube holder;
• The Tracxer Code Reader TS201 will scan and decode the tube code and export the code into the
program which is activated on the computer (keyboard wedge functionality);
• The reader is set for robust reading of any 2D Data-Matrix code. An integrated light is switched on for
easy and unambiguous sample identication when no external light is available.

2 Examples
Reads any tube size in 96-well format;
Reads any tube size in 48-well format;
Reads any tube size in 24-well format.
d WArrAntY
The warranty period on Micronic equipment begins on the day the product was purchased from an author-
ized dealer and ends after 12 months.
For more information about the Micronic Warranty on equipment please check the Micronic Warranty
Statement le (PD801801) or paragraph ‘Warranty and Liability’ in the User Manual, which are both avail-
able on the supplied CD-ROM.

Platinastraat 51
8211 AR Lelystad
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Website: www.micronic.com
GETTING STARTED WITH
TRACXER
CODE READER
TS201
The working of the Traxcer Code Reader equipment is light sensitive.
Despite of all precautions that have been taken by the designers of the
system, there is always a possibility that exterior lighting conditions can
interfere with the functioning of the Traxcer Code Reader. If the tube code
is exposed too much to stray light, the correct functioning of the Traxcer
Code Reader cannot be guaranteed.
pLeAse vIsIt our WeBsIte: WWW.mICronIC.Com
!