MicroTouch SK-097P-A2 User manual

SK-097P-A2
Slimline Kiosk Monitor (USB-C)
User Manual

1
About This Document
No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or
by any means, including, but not limited to, electronic, magnetic, optical, chemical,
manual, or otherwise without prior written permission of MicroTouchTM a TES Company.
The information in this document is subject to change without notice. MicroTouchTM a
TES Company makes no representations or warranties with respect to the contents
herein, and specifically disclaims any implied warranties of merchantability or fitness for
a particular purpose. MicroTouchTM a TES Company reserves the right to revise this
publication and to make changes from time to time in the content hereof without
obligation of MicroTouchTM a TES Company to notify any person of such revisions or
changes. Windows is a registered trademark of Microsoft, Inc. Other brand or product
names are trademarks of their respective holders.

2
FCC/ IC Statement
This device complies with Part 15 of the FCC Rules and Canadian ICES-003/NMB-003
regulation. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning:
This device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case you will be required to correct the
interference at your own expense.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.

3
Usage Notice
Precautions
Please follow all warnings, precautions and maintenance as recommended in this user’s
manual to maximize the life of your unit.
Do ：
▪Turn off the product before cleaning.
▪Use a soft cloth moistened with mild detergent to clean the product housing.
▪Use only the qualified power adapter that comes with your device.
▪Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t ：
▪Do not use abrasive cleaners, waxes or solvents for your cleaning.
▪Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
! Warning - To prevent the risk of fire or shock hazards, and do not
expose the product to moisture.
! Warning - Please do not open or disassemble the product as this may
cause electric shock.

4
TableofContents
Chapter 1........................................................................................................................5
1.1 Overview....................................................................................................................6
1.2 Feature ......................................................................................................................6
1.3 Specifications.............................................................................................................7
1.4 Block Diagram............................................................................................................8
1.5 Interface Connectors..................................................................................................9
1.5.1 Power Connector ...............................................................................................9
1.6 Package Overview..............................................................................................10
Chapter 2......................................................................................................................11
2.1 About VESA Mount..................................................................................................12
2.2 User Control.............................................................................................................13
2.3 Dimension................................................................................................................14
2.3.1 Front View........................................................................................................14
2.3.2 Side View.........................................................................................................14
2.3.3 Rear View ........................................................................................................15
2.3.4 Bottom view......................................................................................................15
Appendix ......................................................................................................................16
Declaration of the Presence Condition of the Restricted Substances Marking..............17

5
Chapter 1
Product Introduction

6
1.1 Overview
The SK-097P-A2 series is a thinnest 9.7" monitor that offers a unique screwless design
with expandability and flexibility, making expansion and accessory installation much
easier. The versatility of SK-097P-A2 is an exceptional choice for applications in all
business sectors, especially in the retail market.
1.2 Feature
▪Unique screwless design for better user experience.
▪Only one type-c connector, support PD3.0, DP ALT mode.

7
1.3 Specifications
System
Power Requirement
Type-C 12V / 36W
External I/O Port
USB 3.1 Type C x 1 (support PD3.0, DP ALT mode)
LCD Touch Panel
Size
9.7” TFT LCD
Brightness
Typ. 350 cd/m2Min. 300 cd/m2(Non-touch screen)
Typ. 315 cd/m2 Min. 270 cd/m2(P-CAP)
Number of Pixels
1024 (H) × 768 (V)/ 60Hz
Touch Type
P-CAP/ 10 points
Tilt Angle
0~55
Environment
Certificate
CE、FCC
Compliance
IP54 (Front Bezel)、IPX1
Operating Temperature
0C ~ 40C
Storage Temperature
-20C ~ 60C
Operating Humidity
0% ~ 90% RH, non-condensing
Mounting
VESA 100 mm x 100 mm
Dimension (W x H x D)
225.6 mm x 184.0 mm x 36.6 mm
Net Weight
0.87Kg
Gross Weight
1.14Kg

8
1.4 Block Diagram

9
1.5 Interface Connectors
1.5.1 USB3.1 type-C connector
Pin
Signal
Pin
Signal
A1
GND
B12
GND
A2
SSTXp1
B11
SSRXp1
A3
SSTXn1
B10
SSRXn1
A4
VBUS
B9
VBUS
A5
CC1
B8
SBU2
A6
Dp1
B7
Dn2
A7
Dn1
B6
Dp2
A8
SBU1
B5
CC2
A9
VBUS
B4
VBUS
A10
SSRXn2
B3
SSTXn2
A11
SSRXp2
B2
SSTXp2
A12
GND
B1
GND

10
1.6 Package Overview
LCD Display screw

11
Chapter 2
Product Installation

12
2.1 About VESA Mount
The SK-097P-A2 series conform to the “VESA Flat Display Mounting Interface
Standard”which defines a physical mounting interface for touch monitor, and
corresponding with the standards of touch monitor mounting devices, such as
wall-mounted or pole-mounted. The VESA mount is located on the back of this unit.
! Warming!
Please select the original screws!
The distance between the back cover surface and the bottom of the screw hole
is 8 mm and 18 mm. Please use four M4 screws diameter with proper length to
mount your monitor.
Note: The mounting stand must be able to support at least 7.67 lbs (3.48 Kg).
VESA Mount

13
2.2 User Control
2.2.1 Key Functions behavior
Fun
Key
System status
Display
On
Power ON-Green
LED
Display (Backlight/Panel Power on)
Off
Power OFF-Red
LED
No Display (Backlight/Panel Power off)
Note:
Normal status: Push the power button 10 sec, into factory mode.
Sleep status: Push the power button 10 sec, into burn-in mode.

14
2.3 Dimension
2.3.1 Front View
2.3.2 Side View

15
2.3.3 Rear View
2.3.4 Bottom view

16
Appendix

17
Declaration of the Presence Condition of the Restricted Substances Marking
設備名稱：觸控螢幕 型號（型式）：SK-097P-A2
Equipment name：Touch Screen LCD Monitor Type designation (Type) ：SK-097P-A2
單元 Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
塑膠零件
Plastic Parts
○
○
○
○
○
○
金屬零件
Metal Parts
－
○
○
○
○
○
線纜和電纜組件
Cable
component
－
○
○
○
○
○
LCD 面板
LCD Panel
－
○
○
○
○
○
觸控式螢幕面板
Touch Panel
－
○
○
○
○
○
PCBA
－
○
○
○
○
○
軟體(CD 等)
Software
○
○
○
○
○
○
Note 1：〝Exceeding 0.1 wt %〞and〝exceeding 0.01 wt %〞indicate that the percentage content of
the restricted substance exceeds the reference percentage value of presence condition.。
Note 2：〝○〞indicates that the percentage content of the restricted substance does not exceed the
percentage of reference value of presence.
Note 3：The〝−〞indicates that the restricted substance corresponds to the exemption.