MidiLand 7100 User manual

OWNER’S MANUAL
Please read this manual thoroughly
and retain it for future reference.
Themodelandserialnumbersarelocatedon
thebackofthesubwoofer. Recordtheserial
numberinthespaceaboveforfuturereference.
S4 MidiLand
7100/7100M
SELF-POWERED MULTIMEDIA
SPEAKER SYSTEM
© 2000ByMidiLand,Inc. AllRightsReserved.
S4 MidiLandS4 MidiLand
S4 MidiLandS4 MidiLand
S4 MidiLand™™
™™
™71007100
71007100
7100
Serial #Serial #
Serial #Serial #
Serial #

IMPORTANT SAFEGUARDS
About operating voltageAbout operating voltage
About operating voltageAbout operating voltage
About operating voltage
Operate the unit with the appropriate voltage as indicated on the
outer packaging and where power cord comes out of the AC
adapter. It will be one of the following:
•110V-120V @60 Hz • 220V-240V @50Hz
About safetyAbout safety
About safetyAbout safety
About safety
• The nameplate indicating operating voltage, power
consumption, etc…is located on the AC adapter.
• Unplug the unit from the wall outlet when it is not to be
used for an extended period of time. To disconnect the
cord,pullit outby graspingthe plug,never pullit outby
thecord.
• Should any solid object or liquid fall into the unit,
disconnect the AC power cord, and have qualified service
professional check the unit before operating the unit
again.
About installationAbout installation
About installationAbout installation
About installation
• Do not place the unit near heat sources, moisture, rain or
mechanical shock, and ensure that there is nothing to
interfere with proper ventilation/airflow.
• Although the unit is magnetically/video shielded, it is
recommended that magnetically sensitive equipment such
as personal credit cards, floppy disks, TV screens,
etc…be placed as far as reasonably possible away from
theunit.
• The unit should only be used with a cart or stand that is
recommendedby themanufacturer.
• The unit should be mounted to a wall or ceiling only as
recommendedby themanufacturer.
The “lightening bolt” symbol
is intended to alert the user to
the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be
of electric shock to persons.
The “exclamation mark” symbol
is intended to alert the user
tothe presenceof important
operating and maintenance
instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE!TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE!TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE!
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE!
The S4 MidiLand™ 7100 High Performance Multimedia 100W RMS Powered Loudspeaker System you are about to set-The S4 MidiLand™ 7100 High Performance Multimedia 100W RMS Powered Loudspeaker System you are about to set-
The S4 MidiLand™ 7100 High Performance Multimedia 100W RMS Powered Loudspeaker System you are about to set-The S4 MidiLand™ 7100 High Performance Multimedia 100W RMS Powered Loudspeaker System you are about to set-
The S4 MidiLand™ 7100 High Performance Multimedia 100W RMS Powered Loudspeaker System you are about to set-
up and install is one of the finest multimedia products available today. Please locate all of the parts below before youup and install is one of the finest multimedia products available today. Please locate all of the parts below before you
up and install is one of the finest multimedia products available today. Please locate all of the parts below before youup and install is one of the finest multimedia products available today. Please locate all of the parts below before you
up and install is one of the finest multimedia products available today. Please locate all of the parts below before you
begin.begin.
begin.begin.
begin.
SELF-THREADING
SCREWS
SLOTCOVER
INTERFACECABLE
SPEAKER CABLES (5)
CAUTION
RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCKRISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCK
DO NOT OPEN!DO NOT OPEN!
DO NOT OPEN!DO NOT OPEN!
DO NOT OPEN!
A VIS: RISQUE DE CHOC ELECTRIQUE NE PRISQUE DE CHOC ELECTRIQUE NE P
RISQUE DE CHOC ELECTRIQUE NE PRISQUE DE CHOC ELECTRIQUE NE P
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIRAS OUVRIR
AS OUVRIRAS OUVRIR
AS OUVRIR
SATELLITESPEAKERS
CONTROLMODULE
AUDIO CABLE (3)
POWERED
SUBWOOFER
POWERTRANSFORMER
3.5mmTO RCA MALE AudioCable (2) 22
22
2
RIBBONCABLE
123456789012345678901234
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
1
2345678901234567890123
4
123456789012345678901234
MOUNTINGSTRIPS
CONTENTS
RUBBERFEET
3.5mmTO RCA MALE AudioCable (2)

1SETUP
33
33
3
2
Select a location for the satellite speakerssatellite speakers
satellite speakerssatellite speakers
satellite speakers which is solid and places them an appropriate distance apart for good stereo imaging
(2-3’apart if usingona desktop withyourmultimedia computer,personalstereoor mini-bookshelfaudiosystem;at least3-4’apart
if using fairly close to a television set with your set top video game and at least 6’-8” apart if using them in a home theater or
traditional audio setup (i.e., when listening from across the room).
Featuringadualangleelipsoidaldesign,thesatellitespeakersmaybeusedineitheroftwo(2)“tilt”anglessimplybyturningtheunit
“upside-down”.Theanglecanbe15°or25°tohelpraisethestereoimageandimprovefocusandclarity. Thesatellitespeakersmay
also be wall mounted with optional bracket available separately from your dealer.
Select a solid location for the subwoofersubwoofer
subwoofersubwoofer
subwoofer (generally on the floor) which allows adequate ventilation for the 60W RMS
IntegratedAmplifiermountedintherearofthesubwooferenclosure.Toenhancebassperformance,itisgenerallyadvisabletoplace
the subwoofer next to a wall or solid piece of furniture with the woofer/grille side pointing away from the wall or furniture. You’ll
probably want to experiment with several different locations once you’ve completed the installation and hookup. Place 4 RubberRubber
RubberRubber
Rubber
FeetFeet
FeetFeet
Feet under subwoofer to protect the mounting surface, if necessary.
If you choose to mount the control modulecontrol module
control modulecontrol module
control module internal to a computer, refer to illustration I-1illustration I-1
illustration I-1illustration I-1
illustration I-1. However, if you choose to mount the
controlmoduleexternally(i.e.theundersideofyourdesktop,underneathyourmonitor,ontopofyourdesktop,etc.),wehavesupplied
self-adhesive mounting strips or 4 Rubber FeetRubber Feet
Rubber FeetRubber Feet
Rubber Feet to secure/place the controls wherever it is most convenient.
•
•
•
•
l Five (5) Satellite SpeakersSatellite Speakers
Satellite SpeakersSatellite Speakers
Satellite Speakers.
l One (1) SubwooferSubwoofer
SubwooferSubwoofer
Subwoofer with integrated 100W RMS power amplifier.
l One (1) CM-7 Control ModuleControl Module
Control ModuleControl Module
Control Module.
l One (1) 10 Feet, 9-Pin to 9-Pin Interface CableInterface Cable
Interface CableInterface Cable
Interface Cable (subwoofer to CM-7 control module).
l Two (2) 6 Feet and 8 inches, high performance Wire Speaker CablesSpeaker Cables
Speaker CablesSpeaker Cables
Speaker Cables.
l Two (2) 16 Feet, rear channel high performance Speaker Cables.Speaker Cables.
Speaker Cables.Speaker Cables.
Speaker Cables.
l Three (3) 10 Feet, Dual RCA to Dual RCA Audio CableAudio Cable
Audio CableAudio Cable
Audio Cable .
l Two (2) 1.5 Feet, 3.5mm Stereo Mini Jack to RCA Female Audio Cable.3.5mm Stereo Mini Jack to RCA Female Audio Cable.
3.5mm Stereo Mini Jack to RCA Female Audio Cable.3.5mm Stereo Mini Jack to RCA Female Audio Cable.
3.5mm Stereo Mini Jack to RCA Female Audio Cable.
l TWo (2) 1.5 Feet, 3.5mm Mono Mini Jack to RCA Mono Female Audio Cable., 3.5mm Mono Mini Jack to RCA Mono Female Audio Cable.
, 3.5mm Mono Mini Jack to RCA Mono Female Audio Cable., 3.5mm Mono Mini Jack to RCA Mono Female Audio Cable.
, 3.5mm Mono Mini Jack to RCA Mono Female Audio Cable.
l One (1) 2’ 9-pin to 9-pin flat Ribbon CableRibbon Cable
Ribbon CableRibbon Cable
Ribbon Cable with separate metal Slot CoverSlot Cover
Slot CoverSlot Cover
Slot Cover.
l Eight (8) non-marring, self-adhesive Rubber FeetRubber Feet
Rubber FeetRubber Feet
Rubber Feet.
l One (1) 4” self-adhesive control module Mounting StripsMounting Strips
Mounting StripsMounting Strips
Mounting Strips.
l Four (4) Self-threading ScrewsSelf-threading Screws
Self-threading ScrewsSelf-threading Screws
Self-threading Screws for internal mounting of control module.
l One (1) Power Transformer.Power Transformer.
Power Transformer.Power Transformer.
Power Transformer.
YourpackagingmayalsocontainotherprintedmaterialwithspecialoffersfordirectpurchaseofrelatedmultimediaproductsaswellasoptionalMidiLand™accessories.
Prepare the area where you will be installing your multimedia system.
Following are some tips you might want to consider:
Check your S4 MidiLand™ 7100S4 MidiLand™ 7100
S4 MidiLand™ 7100S4 MidiLand™ 7100
S4 MidiLand™ 7100 package for the following items:

With the power switch in the off position and the power transformer plug not connected,
refer to the instructions and illustrations below.
Locate the 10’ 9-pin to 9-pin interface cableinterface cable
interface cableinterface cable
interface cable, plug one end of the 9-pin CM-7 interface connector to the subwoofer’s amplifier
located at the rear of the subwoofer unit and the other end to rear of the CM-7 control moduleCM-7 control module
CM-7 control moduleCM-7 control module
CM-7 control module. If you have chosen to mount
the control module internal to a computer, than you must locate the 2’ 9-pin to 9-pin ribbon cable and refer to illustration I-1illustration I-1
illustration I-1illustration I-1
illustration I-1.
Using the supplied speaker cablespeaker cable
speaker cablespeaker cable
speaker cable connect the front left, front right, rear left, rear right and center satellite speakers to the
subwoofer amplifier’s outputoutput
outputoutput
output. The connection terminals are simple plug-in type, needing only to be concerned with connecting
the output to the correspondent speaker and the type of connection. Refer to illustration I-2illustration I-2
illustration I-2illustration I-2
illustration I-2.
In the package please locate a 1.5’ dual RCA to stereo 3.5 mm stereo jack cable3.5 mm stereo jack cable
3.5 mm stereo jack cable3.5 mm stereo jack cable
3.5 mm stereo jack cable. This cable is intended to connect a
computer’s sound card, a portable CD player, or wherever a source with a 3.5mm jack is required to one of the amplifier’s RCA
inputs. If another type of connector is required, please check with your sound appliance vendor for the adaptor you may need.
Using this 1.5’ cable, simply plug the RCARCA
RCARCA
RCA end into the Audio CableAudio Cable
Audio CableAudio Cable
Audio Cable and connect the RCA plugsRCA plugs
RCA plugsRCA plugs
RCA plugs into the amplifier’s inputinput
inputinput
input.
The red color RCA plug should be connected to the “right” input and the white color RCA to the “left” input. See to the specifica-
tions section for further details. Refer to illustration I-2 to I-6 for your ”SPECIFICillustration I-2 to I-6 for your ”SPECIFIC
illustration I-2 to I-6 for your ”SPECIFICillustration I-2 to I-6 for your ”SPECIFIC
illustration I-2 to I-6 for your ”SPECIFIC
SOUND SOURCE CONNECTION.”SOUND SOURCE CONNECTION.”
SOUND SOURCE CONNECTION.”SOUND SOURCE CONNECTION.”
SOUND SOURCE CONNECTION.”
Power is supplied to the S4 MidiLand™ 7100S4 MidiLand™ 7100
S4 MidiLand™ 7100S4 MidiLand™ 7100
S4 MidiLand™ 7100 via a supplied external Power TransformerPower Transformer
Power TransformerPower Transformer
Power Transformer. The correct voltage adapter is
supplied for the territory you purchased the unit in. First, make sure to connect the coaxial power plug into the labeled power
receptacle on the rear of the subwoofer. Second, connect the country specific corded plug into an approved and properly function-
ing AC wall outlet. DO NOTDO NOT
DO NOTDO NOT
DO NOT use an extension cord or an overly crowded wall plate. Third, make sure the power button is
pushed in on the control module.
FEATURES
44
44
4
•
•
•
•
• 100 WATT RMS INTEGRATED POWER AMPLIFIER
• 6½” (165mm) SUBWOOFER
• 2½” (65mm) WIDEBAND SATELLITE SPEAKERS
• INTERNAL/EXTERNAL REMOTE CONTROL MODULE
• 5.1 MULTI-CHANNEL
• EXTERNAL LOW-NOISE POWER TRANSFORMER
l COMPLETE MAGNETIC/VIDEO SHIELDING
l SMALL DESKTOP “FOOTPRINT”
l DYNAMIC SOUND QUALITY
l PATENT PENDING CM-7 INTERFACE
l DOLBY DIGITAL READY
CONNECTIONS
3

55
55
5
SUBWOOFER-REAR VIEW
Illustration I-2Illustration I-2
Illustration I-2Illustration I-2
Illustration I-2
APPLICATIONSAPPLICATIONS
APPLICATIONSAPPLICATIONS
APPLICATIONS
Keyboard/MIDI/Mixer/PA
Computer/SoundCard
Portablestereo
CD/Laser Disc/VCR/TV/DVD
VideoGames
Game
InterfaceCable
PowerTransformer
Input
Output
F/R R/R SUB
F/L R/L C SURR
F/R F/L C R/RR/L
PowerIn
Switch
Position S4 BUS
REMOTE
CONTROL
S4 M idiLand 4060
Speaker System
S/N:
MIDILAND, INC.
SEE INSTRUC TION M ANUAL
MADE IN CHINA
+
_+
_
CONTROL MODULE
INTERNAL MOUNTING
Illustration I-1Illustration I-1
Illustration I-1Illustration I-1
Illustration I-1
CONTROLMODULE
RIBBONCABLE
SLOT COVER
*TYPICAL COMPUTER
SELF-THREADING
SCREWS
*Pleasenotethatthecontrol
modulemaynotfitintoallcom-
puters. Youmayneedtopur-
chase“rails”orotheradapt-
ers from the maker of your
computer.
APPLICATIONS
Sound Source: StereoSound Source: Stereo
Sound Source: StereoSound Source: Stereo
Sound Source: Stereo
TOSOUNDSOURCE OUTPUT

SUBWOOFER-REAR VIEW
Illustration I-3Illustration I-3
Illustration I-3Illustration I-3
Illustration I-3
Keyboard/MIDI/Mixer/PA
Computer/SoundCard
CD/Laser Disc/VCR/TV/DVD
VideoGames
Game
InterfaceCable
PowerTransformer
Input
Output
F/R R/R SUB
F/L R/L C SURR
F/R F/L C R/RR/L
PowerIn
Switch
Position S4 BUS
REMOTE
CONTROL
S4 M idiLand 4060
Speaker System
S/N:
MIDILAND, INC.
SEE INSTRUC TION M ANUAL
MADE IN CHINA
+
_+
_
Sound Source: 4.1 ChannelSound Source: 4.1 Channel
Sound Source: 4.1 ChannelSound Source: 4.1 Channel
Sound Source: 4.1 Channel
TOSOUNDSOURCE OUTPUT
APPLICATIONSAPPLICATIONS
APPLICATIONSAPPLICATIONS
APPLICATIONS
SUBWOOFER-REAR VIEW
Illustration I-4Illustration I-4
Illustration I-4Illustration I-4
Illustration I-4
Computer/SoundCard InterfaceCable
PowerTransformer
Input
Output
F/R R/R SUB
F/L R/L C SURR
F/R F/L C R/RR/L
PowerIn
Switch
Position S4 BUS
REMOTE
CONTROL
66
66
6
TOSOUNDSOURCE OUTPUT
Sound Source: 5.1 ChannelSound Source: 5.1 Channel
Sound Source: 5.1 ChannelSound Source: 5.1 Channel
Sound Source: 5.1 Channel
APPLICATIONSAPPLICATIONS
APPLICATIONSAPPLICATIONS
APPLICATIONS

SUBWOOFER-REAR VIEW
Illustration I-5Illustration I-5
Illustration I-5Illustration I-5
Illustration I-5
APPLICATIONSAPPLICATIONS
APPLICATIONSAPPLICATIONS
APPLICATIONS
CD/LaserDisc/TV/DVD
InterfaceCable
PowerTransformer
Input
Output
F/R R/R SUB
F/L R/L C SURR
F/R F/L C R/RR/L
PowerIn
Switch
Position S4 BUS
REMOTE
CONTROL
S4 M idiLand 4060
Speaker System
S/N:
MIDILAND, INC.
SEE INSTRUC TION M ANUAL
MADE IN CHINA
+
_+
_
77
77
7
SUBWOOFER-REAR VIEW
Illustration I-6Illustration I-6
Illustration I-6Illustration I-6
Illustration I-6
APPLICATIONSAPPLICATIONS
APPLICATIONSAPPLICATIONS
APPLICATIONS
CD/LaserDisc/TV/DVD
InterfaceCable
PowerTransformerr
Input
Output
F/R R/R SUB
F/L R/L C SURR
F/R F/L C R/RR/L
PowerIn
Switch
Position S4 BUS
REMOTE
CONTROL
S4 M idiLand 4060
Speaker System
S/N:
MIDILAND, INC.
SEE INSTRUC TION M ANUAL
MADE IN CHINA
+
_+
_
Sound Source: Dolby Pro LogicSound Source: Dolby Pro Logic
Sound Source: Dolby Pro LogicSound Source: Dolby Pro Logic
Sound Source: Dolby Pro Logic
Sound Source: Dolby DigitalSound Source: Dolby Digital
Sound Source: Dolby DigitalSound Source: Dolby Digital
Sound Source: Dolby Digital
TOSOUNDSOURCE OUTPUT
TOSOUNDSOURCE OUTPUT

88
88
8
After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet.
On the control module, set the controls as follows:
l Turn on the system with the POWERPOWER
POWERPOWER
POWER button.
l Rotate the VolumeVolume
VolumeVolume
Volume control fully couterclockwise.
l Press the MuteMute
MuteMute
Mute buttons so that they are in the out position, not “engaged”.
l Turn the BassBass
BassBass
Bass, Fade,TrebleFade,Treble
Fade,TrebleFade,Treble
Fade,Treble, and BalanceBalance
BalanceBalance
Balance to the center detent position, “12 o’clock”.
5
4
l Start your music, CD-ROM, movie, or other sound source playing and turn up its output level, if available.
l Rotate the VV
VV
Volumeolume
olumeolume
olume control clockwise to the desired listening level.
l Adjust the BalanceBalance
BalanceBalance
Balance control left and right to audibly check your connections.
l Rotate the BassBass
BassBass
Bass and TrebleTreble
TrebleTreble
Treble left and right. You should noticably hear an increase or decrease in tone.
l Rotate the FadeFade
FadeFade
Fade control left and right to adjust front and rear sound separation.
l Make sure to experiment with all of the controls to customize the sound just the way you like it. If you have a question,
look in to the TroubleshootingTroubleshooting
TroubleshootingTroubleshooting
Troubleshooting page.
l For further support e-mail us at [email protected] or call Customer Service at [phone] or call your local
Midiland Authorized dealer.
To start making music, adjust the controls as follows:
HOW TO USE

TROUBLESHOOTING
For further information or support, e-mail us at [email protected] or call Customer Service at [phone].
Three Years Limited WarrantyThree Years Limited Warranty
Three Years Limited WarrantyThree Years Limited Warranty
Three Years Limited Warranty
MidiLand,Inc. warrantsto the end user that all of its computer speakers are free from defects in materials and
workmanshipinthecourseofnormalandreasonableuseforatermofthree(3)yearsfromthedateofpurchase.
Thiswarranty is the exclusive and only warrantyin effectrelative toMidiLand, Inc.computer speakersystems
and any other warranties, either expressed or implied, are invalid. Neither MidiLand Inc., nor any authorized
MidiLand, Inc. reseller is responsible for any incidental damages incurred in the use of the speakers. (This
limitation of incidental or consequential damage is not applicable where prohibited).
MidiLand, Inc. obligation under this warranty does not apply to any defect, malfunction or failure as a result of
misuse, abuse, improper installation, use with faulty or improper equipment of the use of the computer speaker
systems with any equipment for which they are not intended.
The terms of this warranty apply only to computer speaker systems when such speakers are returned to the
respective authorized MidiLand, Inc. reseller where they were purchased.
Under the terms of the warranty the original consumer purchaser has certain legal rights and may have other
rights which vary worldwide.
WARRANTY
PROBLEM POSSIBLE SOLUTION
No sound at allNo sound at all
No sound at allNo sound at all
No sound at all
Verify that the system is plugged into a wall outlet and that the outlet is not switched to the “off”
position.
Make sure that the amplifier’s powerpower
powerpower
power switch is pushed in on the Control Module and that the green
CM-7 LED is illuminated.
Turn the volumevolume
volumevolume
volume on the control module up.
Turn the output level from your sound source up.
Make sure the mutemute
mutemute
mute botton is not engaged.
Only one channel isOnly one channel is
Only one channel isOnly one channel is
Only one channel is
workingworking
workingworking
working
Check that the balancebalance
balancebalance
balance and fadefade
fadefade
fade controls are centered and that the input connections are OK.
Make sure that there are no loose speaker cable connections. The speaker cable plug must be firmly
seated in the proper jack on the rear side of the satellite and amplifier.
99
99
9

SPECIFICATIONS
SYSTEMTYPE: Self-PoweredMultimediaSatellite/SubwooferLoudspeakerSystem
SYSTEMCOMPONENTS: 6½"(165mm)Subwoofer(containsIntegratedPowerAmplifier)
2½"(65mm)WidebandSatellites(Five)
Control Module
Connecting Cables
OVERALL ACOUSTICOVERALL ACOUSTIC
OVERALL ACOUSTICOVERALL ACOUSTIC
OVERALL ACOUSTIC
FREQUENCY RESPONSE: 20Hz to20kHz (+/-3dB)
MAXIMUM SPL: 100 dB (@ <10% THD/1 kHz)
AMPLIFIERTYPE/ ClassA/BHybrid-MonolithicDesign,ProprietaryCM-7Interface,UL94V-0SpecPrintedCircuit
DESIGN FEATURES: Boards, Redundant Protection Circuits (Thermal, Short-Circuit, Under/Over Voltage), Gold-Plated Inputs
Outputs,andMute/PowerCircuits
AMPLIFIER POWER: 100WattsRMS(lx50Watt,5x10Watt)50Hzto20kHz,allchannelsdriven,4W@<0.1%THD
INPUT IMPEDANCE: > 50k Ohms @ 1 kHz, < 200pf @ 20 kHz
INPUTSENSITIVITY: INPUT>200mVRMS(minimumrequiredinputleveltoachievemaximumoutput@1kHz)
DYNAMIC HEADROOM: >2 dB
INPUTS: Gold-PlatedRCAjack
OUTPUTS: 5ChannelTerminal;LeftandRightSatelliteSpeakerviaPushTerminal.
SUBWOOFER: 165mmPolyLaminatedPaperConewith25mmOFCVoiceCoilonTSVCompositeFormer,
Shielded Magnet Structure
SUBWOOFER ENCLOSURE: Rigidly-bracedMDF(Wood),Computer-OptimizedFront-FiringVentedDesign
(13.50"Hx8.70"Wx13.40"D) withTurbulence-FreePortandNon-RemovableFabricGrille
SATELLITESPEAKERS: 65mmComputer-OptimizedWidebandPaperConeDrivers,
SpeakerMagnetStructures(magneticshielding)
SATELLITEENCLOSURES: Two-PieceMolded,Dual-SlopeEllipsoidalAcousticSuspensionDesign,
(4.00"Hx 3.30" Wx4.10"D) Embedded¼"-20ThreadedInserts(foroptionalmountingbrackets)anddecorativeclothgrilles
CROSSOVER FREQUENCY: 180Hz
CONTROLMODULE(Preamp): Patent-PendingS4Bus™InterfacetoIntegratedPowerAmplifierforcontrolofMajorSystem
(1.7"Hx5.8"W x 3.1"D) Functions—Volume,Balance,Bass,Fade,Treble,Power,Mute
NoteNote
NoteNote
Note
Design and specifications are subject to change without notice.
1010
1010
10