midiplus Dreamer Series User manual

MIDIPLUS
Dreamer Series Keyboard
Owner’s Manual
ENGLISH(page：1-14)
中文（页：15-29）

1
Preface
Thank you for purchasing Dreamer-series MIDI keyboard. This series includes two
kinds of keyboard: Dreamer61 with 61keys and Dreamer88 with 88keys.The keys
are semi-weighted and velocity sensitive.All the keys are designed as piano-style
keys which bring you an excellent piano feeling during playing.Typical interface
design makes this device to be easily connected with your computer and other MIDI
devices. In addition, Dreamer-series MIDI keyboard contains a built-in soundcard
and has some touch controllers.These will make your musical creation or teaching to
achieve a great effect.
Dreamer61/88 can work at Windows system and Mac OSX system without any other
special drivers.In order to make you more quickly and correctly work with the
Dreamer keyboard,please read this manual carefully.
1. You can find these in the package:
● Dreamer series MIDI keyboard
● USB cable
● User's Manual
● CD
●power adaptor
If your package misses one of the above, please contact with the dealer you
purchased.
2. Dreamer Series Operation Instruction
During play this device,please notice the following:
●Do not use the device under the humid,corrosive,dusty and higher or lower
temperature environment.
●Do not use the device in an unstable place where it might be fallen down.
●The touch button responses delayed or LED blinks sometime
If you find this problem, please power the device only by external power
adapter.

2
3. Diagram
Figure1.1 Diagram
4. Front Panel
Figure 1.2 Front Panel

3
1．Keyboard
● With 61 or 88 semi-weighted and velocity sensitive keys.
● By changing "Transpose" or "Octave" value,these 61/88 physical keys can be
used as 128 logical keys.
2．PitchBend Touch Bar
● You can modulate the Pitch by moving your finger up and down on the PitchBend
Touch Bar.Moving up the pitch will increase and down the pitch will decrease.
Release or touch the middle of the Bar,pitch unchanged.Just act as the custom
PitchBend Wheel.
3．Modulation Touch Bar
● You can increase or decrease the vibration by moving your finger up and down
on the Modulation Touch Bar.Moving up the vibration will increase and down the
vibration will decrease.Releasing will hold the vibration.Just act as the custom
Modulation Wheel.
4．6 editable Touch Buttons F1~F6
● Normal Mode:The CC value will increase 1 each time when you touch a button.
When touching the LED is on and releasing the LED is off.And the value will
display on the LCD at the same time.The default functions of F1~F6 are:
F1:Transpose F2:Octave F3:Chanel F4:Program F5:Volume F6:MIDI IN.
● Edit Mode:Touch and select the button you want to edit,then you can edit the
selected button's function by turning the Encoder.(Only the selected button's
LED will light on)
5. LCD display
● Power on display:LCD flickeringly displays with:Manufacture name,Product
name and the Version of Firmware.
● Standby display (Only at Normal Mode): First line:"MIDI IN:_ "，Second line:"
Chl:_ Pro:_ ".Each parameter is short for: MIDI IN ON/OFF, Chanel, Program.
● Operation display:Point out the current operated controller's information
First line:Controller's name,Second line:Parameter's CC Number and CC Value.
6. Encoder
● Normal Mode:you can use the Encoder to adjust the value of the last button you
touched.
● Edit Mode:You can use the Encoder to configurate the function of the last
button you touched.
7. Encoder Switch
● The Encoder Switch is used to switch the Mode of the button. You can switch
the two Modes by pressing the Encoder Switch.(Power on the device,the
default mode is Normal Mode.)

4
5. Rear Panel
Figure1.3 Rear Panel
8. AUXOUT
● You can monitor the audio(stereo) from this jack.
9. EXPRESSSION Pedal
●This jack allows you to connect an optional Expression Pedal to the keyboard.
10. Sustain Pedal
●This jack allows you to connect an optional Sustain Pedal to the keyboard.
11. MIDI IN
●This Jak is used to receive the external MIDI messages.If MIDI IN is ON,the
device can receive MIDI message,while MIDI IN is OFF,the device rejects to
receive any external MIDI messages.
12. MIDI OUT
● This jack is used to send MIDI messages to the external MIDI devices.
13. USB port
● This jack is used to connect the keyboard with the computer, to get power and
communicate with the computer.
14. External Power Supply
● This jack is used to get the external power.
6. Modes of Touch Button
The touch button has 2 Modes:Normal Mode and Edit Mode.Power on the device,the
default mode is Normal Mode.You can switch the Mode by pressing the Encoder
Switch.

5
1. Normal Mode
Each time you touch the button,the CC value of the button will change.By touching
the LED is on and releasing the LED is off.And at this mode,the Encoder is used to
change the selected button's CC value quickly( turn right to increase and left to
decrease).
For example,change the volume.The default button of "Volume"is F5.the following
steps will help you.
First,Select F5 button by touching.
Second,touch F5 button one or more times,or turn the Encoder to achieve the
volume.
Note:By touching the button one or more times,you can tune the CC value slowly.If
you want to change the value quickly,please use the Encoder.By turning the
Encoder,the value can be changed from 0 to 127 or from 127 to 0.
2. Edit Mode
At this Mode,you can select the button you want to edit by touching.When you
touching a button,the CC value will not be changed and the LED under the button will
light on.You can configurate the selected button by turning the Encoder.
For example,edit the F5 button to a "Program" button.The following steps will help
you.
First,Press the Encoder Switch to switch to Edit Mode.
Second,Select F5 button and the LED under it will light on.
Third,Turn the Encoder.Stop turning when the LCD displays:Program.
Forth,Press the Encoder Switch to switch to Normal Mode.
Note:Switch to the Normal Mode,the edit will be stored in the memory.For the details
of the function ID,please refer toAppendix 1.
7. Factory Reset
First press the Encorder Switch,then power on the device,now the device is ready to
restore to factory setting.During the factory reset,the LCD will dispaly "Enter to
confirm Factory reset>F1" and the F1 button LED will twinkle.If you want to restore to

6
factory setting,please press the F1 button in 3 seconds and will restore to factory
setting. After restoring completely,all the LEDs will be on and begin to start the device
normally.If you do not do any operation in 3 seconds,the device will begin to start
normally.Please refer to Appendix 2 for the factory settings.
Appendix 1 Function ID code List
Control
Number
Control Function
Control Value
Display
0
Controller Off
/
"Controller Off"
1
Bank Select
0~127
"Bank MSB"
2
Modulation Wheel or Lever
0~127
"Mod.MSB"
3
Breath Controller
0~127
"Breath MSB"
4
Controller Change #3
0~127
"CC#3"
5
Foot Controller
0~127
"Foot MSB"
6
Portamento Time
0~127
"Port.TimeM"
7
Data Entry MSB
0~127
"Data MSB"
8
Channel Volume(formerly
Main Volume)
0~127
"Volume MSB"
9
Balance
0~127
"Balance MSB"
10
Undefined
0~127
"CC#9"
11
Pan
0~127
"Pan MSB"
12
Expression Controller
0~127
"Exp.MSB",
13
Effect Control 1
0~127
"Eff.1 MSB"
14
Effect Control 2
0~127
"Eff.2 MSB"
15
Controller Change #14
0~127
"CC#14"
16
Controller Change #15
0~127
"CC#15"
17
General Purpose Controller 1
0~127
"GPC.1"
18
General Purpose Controller 2
0~127
"GPC.2"
19
General Purpose Controller 3
0~127
"GPC.3"

7
20
General Purpose Controller 4
0~127
"GPC.4"
21~32
Controller Change #20~#31
0~127
"CC#20"~"CC#31"
33
LSB for Control 0 (Bank Select)
0~127
"Bank LSB"
34
LSB for Control 1 (Modulation Wheel or
Lever)
0~127
"Mod.LSB"
35
LSB for Control 2 (Breath Controller)
0~127
"Breath LSB"
36
LSB for Control 3 (Undefined)
0~127
"CC#35"
37
LSB for Control 4 (Foot Controller)
0~127
"Foot LSB"
38
LSB for Control 5 (Portamento Time)
0~127
"Port.TimeL"
39
LSB for Control 6 (Data Entry)
0~127
"Data LSB"
40
LSB for Control 7 (Channel Volume,
formerly Main Volume)
0~127
"Volume LSB"
41
LSB for Control 8 (Balance)
0~127
"Balance LSB"
42
LSB for Control 9 (Undefined)
0~127
"CC#41"
43
LSB for Control 10 (Pan)
0~127
"Pan LSB"
44
LSB for Control 11 (Expression Controller)
0~127
"Exp.LSB"
45
LSB for Control 12 (Effect control 1)
0~127
"Eff.1 LSB"
46
LSB for Control 13 (Effect control 2)
0~127
"Eff.2 LSB"
47
LSB for Control 14 (Undefined)
0~127
"CC#46"
48
LSB for Control 15 (Undefined)
0~127
"CC#47"
49
LSB for Control 16 (General Purpose
Controller 1)
0~127
"GPC.1"
50
LSB for Control 17 (General Purpose
Controller 2)
0~127
"GPC.2"
51
LSB for Control 18 (General Purpose
Controller 3)
0~127
"GPC.3"
52
LSB for Control 19 (General Purpose
Controller 4)
0~127
"GPC.4"
53~64
Controller Change #52~#63
0~127
"CC#52"~"CC#63"
65
Damper Pedal on/off (Sustain)
0~127
"Sus.Pedal"

8
66
Portamento On/Off
0~127
"Portamento"
67
Sostenuto On/Off
0~127
"Sostenuto"
68
Soft Pedal On/Off
0~127
"Soft Pedal"
69
Legato Footswitch
0~127
"Leg.Pedal"
70
Hold 2
0~127
"Hold2"
71
Sound Controller 1 (default Sound
Variation)
0~127
"S.Var."
72
Sound Controller 2 (default
Timbre/Harmonic Intens.) )
0~127
"S.Timbre"
73
Sound Controller 3 (default Release Time)
0~127
"S.Rel.Time"
74
Sound Controller 4 (default Attack Time)
0~127
"S.Att.Time"
75
Sound Controller 5 (default Brightness)
0~127
"S.Bri."
76
Sound Controller 6 (default Decay Time -
see MMA RP-021)
0~127
"Decay Time"
77
Sound Controller 7 (default Vibrato Rate -
see MMA RP-021)
0~127
"Vib.Rate"
78
Sound Controller 8 (default Vibrato Depth
- see MMA RP-021)
0~127
"Vib.Depth"
79
Sound Controller 9 (default Vibrato Delay -
see MMA RP-021)
0~127
"Vib.Delay"
80
Sound Controller 10 (default undefined -
see MMA RP-021)
0~127
"S.Cont.10"
81
General Purpose Controller 5
0~127
"GPC.5"
82
General Purpose Controller 6
0~127
"GPC.6"
83
General Purpose Controller 7
0~127
"GPC.7"
84
General Purpose Controller 8
0~127
"GPC.8"
85
Portamento Control
0~127
"Port.Ctrl"
86
Controller Change #85
0~127
"CC#85"
87
Controller Change #86
0~127
"CC#86"
88
Controller Change #87
0~127
"CC#87"
89
High Resolution Velocity Prefix
0~127
"HRVP"

9
90
Controller Change #89
0~127
"CC#89"
91
Controller Change #90
0~127
"CC#90"
92
Effects 1 Depth (default Reverb Send
Level - see MMA RP-023) (formerly
External Effects Depth)
0~127
"Rev.Level"
93
Effects 2 Depth (formerly Tremolo
Depth)
0~127
"Tre.Depth"
94
Effects 3 Depth (default Chorus Send
Level - see MMA RP-023) (formerly
Chorus Depth)
0~127
"Cho.Level"
95
Effects 4 Depth (formerly Celeste
[Detune] Depth)
0~127
"Cel.Depth"
96
Effects 5 Depth (formerly Phaser
Depth)
0~127
"Pha.Depth"
97
Data Increment (Data Entry +1) (see
MMA RP-018)
0~127
"Data +1"
98
Data Decrement (Data Entry -1) (see
MMA RP-018)
0~127
"Data -1"
99
Non-Registered Parameter Number
(NRPN) - LSB
0~127
"NRPN MSB"
100
Non-Registered Parameter Number
(NRPN) - MSB
0~127
"NRPN LSB"
101
Registered Parameter Number
(RPN) - LSB
0~127
"RPN MSB"
102
Registered Parameter Number
(RPN) - MSB
0~127
"RPN LSB"
103~120
Controller Change #102~#119
0~127
"CC#102"~"CC#119"
121
[Channel Mode Message] All Sound
Off
0~127
"All Sound Off"
122
[Channel Mode Message] Reset All
Controllers (See MMA RP-015)
0~127
"All Ctrl Off"

10
123
[Channel Mode Message] Local Control
On/Off
0~127
"Local KeyB."
124
[Channel Mode Message] All Notes Off
0~127
"All Notes Off"
125
[Channel Mode Message] Omni Mode
Off (+ all notes off)
0~127
"Omni Mode Off"
126
[Channel Mode Message] Omni Mode
On (+ all notes off)
0~127
"Omni Mode On"
127
[Channel Mode Message] Mono Mode
On (+ poly off, + all notes off)
0~127
"Mono Mode On"
128
[Channel Mode Message] Poly Mode
On (+ mono off, +all notes off)
0~127
"Poly Mode On"
129
Channel Pressure
0~127
"Aftertouch"
130
Program
0~127
"Program"
131
Velocity Curve
L/N/H
"Vel Curve"
132
Global MIDI Channel
1~16
"Channel"
133
Octave
-2~2
"Octave"
134
Transpose
-12~12
"Transpose"
135
MIDI IN Switch
ON/OFF
"MIDI IN"
136
Stop
/
"MMC Stop"
137
Play
/
"MMC Play"
138
Deferred Play
/
"MMC Def Play"
139
Forward
/
"MMC Forward"
140
Rewind
/
"MMC Rewind"
141
Record Strobe
/
"MMC Rec Strobe"
142
Record Exit
/
"MMC Rec Exit"
143
Record Pause
/
"MMC Rec Pause"
144
Pause
/
"MMC Pause"
145
Eject
/
"MMC Eject"
146
Chase
/
"MMC Chase"
147
Command Error Reset
/
"MMC Error Reset"

11
Appendix 2 Detail of Factory Setting
Parameter
Factory Setting
Value Extent
Remark
Velocity
Normal Curve
Light Normal
Heavy
Power off save*
Channel
0
0~15
Power off save*
Program
0
0~127
Power off save*
Transpose
0
-12~+12
Boot default
Octave
0
-2~+2
Boot default
Volume
64
0~127
Boot default
MIDI IN
ON
ON/OFF
Boot default
Pitch Bend Touch
4000
-8192~+8191
Boot default
ModulationTouch
0
0~127
Boot default
Expression Pedal
0(Off)
0~127
Boot default
Sustain Pedal
Off
On/Off
Boot default
Touch button 1
Transpose
0~147*
Power off save*
Touch button 2
Octave
0~147*
Power off save*
Touch button 3
Channel
0~147*
Power off save*
Touch button 4
Program
0~147*
Power off save*
Touch button 5
Volume
0~147*
Power off save*
Touch button 6
MIDI IN
0~147*
Power off save*
Remark:
Power off save*:the edit will be stored in the memory. When restart the device,the
button will have the function you had edited.
Boot default:The current value do not store in the memory.Restart the device,the
value is also the default.
0~147*: Please refer to “Function ID code List”.

12
Appendix 3 Voice List
1
(Grand)Piano 1
30
Overdriven Guitar
59
Tuba
2
(Bright)Piano 2
31
Distortion Guitar
60
Muted Trumpet
3
(El. Grd)Piano 3
32
Guitar harmonics
61
French Horn
4
Honky-tok Piano
33
Acoustic Bass
62
Brass Section
5
El. Piano 1
34
Finger Bass
63
Synth Brass 1
6
El. Piano 2
35
Picked Bass
64
Synth Brass 2
7
Harpsichord
36
Fretless Bass
65
Soprano Sax
8
Clavi
37
Slap Bass1
66
Alto Sax
9
Celesta
38
Slap Bass 2
67
Tenor Sax
10
Glockenspiel
39
Synth Bass 1
68
Baritone Sax
11
Music Box
40
Synth Bass2
69
Oboe
12
Vibraphone
41
Violin
70
English Horn
13
Marimba
42
Viola
71
Bassoon
14
Xylophone
43
Cello
72
Clarinet
15
Tubular Bells
44
Contrabass
73
Piccolo
16
Sanutur
45
Tremolo Strings
74
Flute
17
Drawbar Organ
46
Pizzicato Strings
75
Recorder
18
Percussive Organ
47
Orchestral Harp
76
Pan Flute
19
Rock Organ
48
Timpani
77
Blown Bottle
20
Church Organ
49
String Ensemble1
78
Shakubachi
21
Reed Organ
50
String Ensemble 2
79
Whistle
22
Accordion(french)
51
Synth Strings1
80
Ocarina
23
Harmonica
52
Synth Strings2
81
Lead1(square)
24
Tango Accordion
53
Choir Aahs
82
Lead2(sawtooth)
25
Ac.Guitar(nylon)
54
Voice Oohs
83
Lead3(calliope)
26
Ac.Guitar(steel)
55
Synth Voice
84
Lead4(chiff)
27
El.Guitar(jazz)
56
Orchestra Hit
85
Lead5(charang)
28
El.Guitar(clean)
57
Trumpet
86
Lead6(voice)
29
El.Guitar(muted)
58
Trombone
87
Lead7(fifths)

13
88
Lead8(bass+lead)
102
FX6(goblins)
116
Woodblock
89
Pad1(fantasia)
103
FX7(echoes)
117
Taiko Drum
90
Pad2(warm)
104
FX8(sci-fi)
118
Melodic Tom
91
Pad3(polysynth)
105
Sitar
119
Synth Drum
92
Pad4(choir)
106
Banjo
120
Reverse Cymbal
93
Pad5(bowed)
107
Shamisen
121
Gt. Fret Noise
94
Pad6(metallic)
108
Koto
122
Breath Noise
95
Pad7(halo)
109
Kalimba
123
Seashore
96
Pad8(sweep)
110
Bagpipe
124
Bird Tweet
97
FX1(rain)
111
Fiddle
125
Teleph. Ring
98
FX2(soundtrack)
112
Shanai
126
Helicopter
99
FX3(crystal)
113
Tinkle Bell
127
Applause
100
FX4(atmosphere)
114
Agogo
128
Gunshot
101
FX5(brightness)
115
Steel Drums

14
Appendix 4 Technical Specifications
General
Product Name
Dreamer 61/88
Keyboard
61/88 semi-weighted keyboard(Velocity and channel
pressure sensitive)
Display
Custom LCD backlight
Button
6 touch buttons
Touch Bar
PitchBend Touch Bar,Modulation Touch Bar
Encoder
Encoder with steps and switch(360 degree)
Jacks
MIDI IN/OUT jack,power jack,Expression and Sustain
jack,USB,AUXOUT.
Power Adapter
DC 9V / 1A,2.00mm core
Sound source
Integrated an audio module
Maximum Polyphon
64 notes
Instruments
Built-in 128 GM instruments
Accessories
User's Manual、USB cable、CD、power adaptor
Inputs/Outputs
MIDI IN
5-pin DIN*1
MIDI OUT
5-pin DIN*1
USB
USB-B
DV 9V IN
9V DC 1A
AUX
1/4" audio output
Expression Pedal
1/4" pedal jack
Sustain Pedal
1/4" pedal jack

15
前言
感谢您购买 Dreamer 系列 MIDI 键盘。Dreamer 系列提供两款有力度感应的标准
半配重键盘，他们分别是 61 键的 Dreamer61 和88 键的 Dreamer88。两款键盘琴键
都采用钢琴设计，能够为您提供较为舒适的钢琴手感；同时为了满足该系列键盘的扩
展性，该系列键盘还提供丰富的接口；除此之外，还集成了音源模块、触摸控制部件
和一些便于操作的部件，这些元素能够为您带来音乐创作或教学运用上的悦耳、便捷、
舒适和新意的感受。
本系列产品在 Windows 系统和 Mac OS X 操作系统下均可即插即用，无需其他
特殊的驱动程序。为了让您的键盘能够更好的为您服务，建议详细阅读本手册内容。
一、产品包装清单
您购买到的 Dreamer 系列产品包装盒内应该包含以下物品：
●Dreamer 系列 MIDI 键盘
●USB 连接线
●用户手册
●CD 一张
●电源适配器
如果您的包装盒中缺少以上其中任何项，请与您购买本产品的经销商联系。
二、产品使用重要提示
在使用本设备时请注意以下事项：
●请勿将本设备放置于湿度高，腐蚀性强，有大量灰尘及温度极端的场所
●本设备较重，请放置于安稳的地方
●触摸按键偶尔功能异常跳动或反应迟缓
如果发现此现象，请更换使用外部电源供电。

16
三、连接示意图
图1.1 接线示意图
四、前面板
图1.2Dreamer 系列产品前面板部件示意图

17
1. 键盘
●61 键和 88 键两种带力度感应的标准半配重钢琴键。
●通过改变 Octave 和Transpose 值可以将物理 61 键或 88 键虚拟成 128 键。
2. Pitch Bend 触摸条
●通过手指触摸滑动调制弯音效果，向上滑动时音高上升，向下滑动时音高下降；释
放或者触摸中间，音高不变（与传统弯音轮效果一致）。
3. Modulation 触摸条
●通过手指触摸滑动调制颤音效果，向上滑动时颤音增强，向下滑动时颤音减弱；释
放颤音依然保持（与传统颤音轮效果一致）。
4. 可自定义功能接触按键 F1~F6
●演奏状态：每次触摸，按键控制值增一个单位。被操作按键的控制信息在显示屏上
呈现，同时按键指示灯点亮。F1~F6 出厂默认功能：F1:Transpose; F2:Octave;
F3:Chanel; F4:Program; F5:Volume; F6:MIDI IN.
●编辑状态：触摸即选定，被选定的按键指示灯保持长亮，同时信息在显示屏上呈现。
选定的按键可以通过编码器指定其功能。
5. LCD 显示屏
●启动界面：开机时屏幕滚动显示品牌、产品和产品的固件版本信息。
●待机界面：在演奏状态下，超过一定时间不操作任何控制器将会出现待机界面。第
一行显示:"MIDI IN:_";第二行显示:"CHL:_Pro:_ "。分别代表 MIDI IN ON/OFF,
Chanel，Program 三个参数。
●操作界面：提示当前操作部件的参数信息。第一行主要显示部件物理名称；第二行
显示部件的功能名称和控制值（Value）。
6. 编码器
●触摸按键演奏状态：调节最近一次操作按键的控制值。
●触摸按键编辑状态：配置被选按键的功能。
7. 编码器按键
●触摸按键状态切换按键。开机时触摸按键默认演奏状态。演奏状态按下编码器按键，
触摸按键进入编辑状态；编辑状态按下编码器按键，触摸按键回到演奏状态。

18
五、后面板
图1.3 Dreamer 系列产品后面板接口示意图
8. 音频输出接口 AUXOUT
●音频输出接口用于连接耳机或者功放等监听设备。
9. Expression 踏板接口
●用户可以根据需要，在此接口外接表情踏板。
10.Sustain 踏板接口
●用户可以根据需要，在此接口外接延音踏板。
11.MIDI IN
●MIDI 信息输入口。外部 MIDI 设备可以通过此接口传输 MIDI 数据，将 Dreamer
系列键盘作为外部音源使用。MIDI 接口输入信息受 MIDI IN 功能控制：当 MIDI IN
功能为 ON 时，Dreamer 键盘接收 MIDI IN 接口数据，当 MIDI IN 为OFF 时键盘
关闭对 MIDI IN 接口数据的接收。
12.MIDI OUT
●MIDI 信息输出口。用于外部 MIDI 设备通信或外扩音源设备使用。
13.USB 接口
●USB 通讯供电接口。用于计算机通信和电源供给。
14.电源接口
●用来连接电源适配器。
六、触摸按键状态
触摸按键设有两种工作状态：演奏状态和编辑状态。设备开机默认演奏状态，两