Miele Classic G 4270 SCVi Parts list manual

Product and Cut-out Dimensions Page 1 of 3
Classic G
4270
SCVi
Fully Integrated Model
Dishwasher
Classic
G
4270
SCVi
Fully
Integrated
Model
Dishwasher
ADA Compliant Series Dishwasher
Location Codes
C- Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.
Adjust according to water and drain location.
D- 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E- 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be
hardwired.
W- 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 of 3
Classic G
4270
SCVi
Fully Integrated Model
Dishwasher
Classic
G
4270
SCVi
Fully
Integrated
Model
Dishwasher
ADA Compliant Series Dishwasher
Custom Panel Installations
Some Miele dishwashers do not come equipped with a front panel. These dishwashers are designed to accept a
custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the
dishwasher to align with the surrounding cabinets.
Width: 23 7/16” (598 mm) in all cases
Thickness: ¾” (19 mm) in all cases
Height:
Determined using the following
dishwasher
to
align
with
the
surrounding
cabinets.
Height:
Determined
using
the
following
calculation:
Panel Height = HTC – TKH
HTC = Height to the underside of countertop
TKH
=
Toe kick height
TKH
Toe
kick
height
Note: Control panel is along the top edge of
the unit. It is not visible when the unit is closed.
A handle MUST be located on the front panel in
order to open the unit.
Maximum panel height:
30 3/8
”
(772
mm)
Maximum
panel
height:
30
3/8
(772
mm)
Minimum panel height: 25 5/8” (650 mm)
Maximum panel weight: 21 Pounds (9.5 kg)
GFVI Installations
Miele offers pre-fabricated stainless steel panels for all fully integrated units. These panels are designed for
various toe-kick heights and offer a choice of handle options.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 3 of 3
Classic G
4270
SCVi
Fully Integrated Model
Dishwasher
Classic
G
4270
SCVi
Fully
Integrated
Model
Dishwasher
ADA Compliant Series Dishwasher
Drawing is not to scale Specification Sheets OJS 11012011