Miele Crystal G 5105 SC Parts list manual

Product and Cut-out Dimensions Page 1 of 3
Crystal G 5105 SC Prefinished Dishwasher
Crystal
G
5105
SC
Prefinished
Dishwasher
Location Codes
C- Cutout 1 3/8” x 1 3/4” (34 mm x 35 mm) for water, drain and electric pass-through.
Adjust according to water and drain location.
D- 5 foot (1.5 meter) flexible drain hose connects lower center rear.
E- 5 foot (1.5 meter)– 120 Volt – 15 Amp 3-wire molded plug power supply connects front terminal or can be
hardwired.
W- 5 foot flexible water intake hose with a 3/8” compression fitting nut connects lower center rear.
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale Specification Sheets OJS 11012011

Product and Cut-out Dimensions Page 2 of 3
Crystal G 5105 SC Prefinished Dishwasher
Crystal
G
5105
SC
Prefinished
Dishwasher
Miele Prefinished
Dishwasher
Panel and control Prefinished
Width: 23 7/16” (598 mm)
Thickness: ¾” (19 mm)
Height: 30 3/16” (767 mm)
Calculating the toe kick height
30 3/16” – HTC = TKH
HTC = Height to the underside of countertop
Drawing is not to scale Specification Sheets OJS 11012011
TKH = Toe kick height

Product and Cut-out Dimensions Page 3 of 3
Crystal G 5105 SC Prefinished Dishwasher
Crystal
G
5105
SC
Prefinished
Dishwasher
Specification Sheets OJS 11012011