Miele PDR 511 SL HP User manual

Quick Start Guide
Commercial tumble dryers
PDR511 SL HP
PDR516 SL EL/G
To avoid the risk of accidents or damage to the
machine, it is essential to read these instruc-
tions before it is installed and used for the first
time.
en-GB
M.-Nr. 12 398 720

Contents
2
Warning and Safety instructions ................................................................................... 4
Extended documentation .................................................................................................. 4
Appropriate use ................................................................................................................. 4
Foreseeable misuse........................................................................................................... 5
Technical safety................................................................................................................. 6
Gas-heated tumble dryers ............................................................................................ 8
Correct use........................................................................................................................ 9
Description of the machine ............................................................................................ 10
PDR511SL(with heat pump) ........................................................................................... 10
PDR516SL(electrically heated) ....................................................................................... 11
PDR516SL(gas heated) .................................................................................................. 12
Operating the tumble dryer ............................................................................................ 13
Machines with residual moisture control (ROP) ................................................................ 13
Drying levels .................................................................................................................. 14
Drying programmes....................................................................................................... 14
Machines with time control (TOP) ..................................................................................... 15
Temperature settings (TOP) ........................................................................................... 16
Timed programmes ....................................................................................................... 16
Machines with payment systems (COP)............................................................................ 17
Drying programmes....................................................................................................... 18
How the control field works............................................................................................... 19
Indicators....................................................................................................................... 19
Drying ............................................................................................................................... 20
1. Notes on correct laundry care....................................................................................... 20
Washing before drying .................................................................................................. 20
Preparing the laundry .................................................................................................... 20
Removing foreign objects ............................................................................................. 20
2.Loading the tumble dryer .............................................................................................. 22
3. Selecting a programme ................................................................................................. 23
Selecting a programme ................................................................................................. 23
Care symbols ................................................................................................................ 23
Drying level for programmes with a selectable drying level .......................................... 23
Time-controlled and other programmes........................................................................ 23
Selecting the Delay start function ................................................................................. 24
4.Starting a programme ................................................................................................... 25
5.Unloading laundry from the tumble dryer ..................................................................... 26
End of the programme .................................................................................................. 26
Removing the laundry ................................................................................................... 26
Care notes ..................................................................................................................... 26
Programme overview ...................................................................................................... 27
“Label” programme package ............................................................................................ 27
“Standard” programme package ..................................................................................... 28
Changing the programme sequence ............................................................................. 29
Changing a programme once it has started...................................................................... 29
Adding laundry .................................................................................................................. 29
Time left............................................................................................................................. 30
Problem-solving guide. . . .............................................................................................. 31
Unsatisfactory drying results............................................................................................. 31

Contents
3
Connectivity ..................................................................................................................... 32
Pairing instructions............................................................................................................ 32
Technical data ................................................................................................................... 33
Optional accessories ...................................................................................................... 34
Communication box .......................................................................................................... 34
XKM3200WLPLT ............................................................................................................ 34
Payment device ................................................................................................................. 35
Technical data.................................................................................................................. 36
Technical data ................................................................................................................... 36

Warning and Safety instructions
4
 It is essential to read these instructions.
Extended documentation
This document contains essential information. You can access the full operating instruc-
tions and other up-to-date documentation for your appliance on the Mielewebsite:
https://www.miele.co.uk/professional/user-manuals-177.htm
In order to access the documentation, you will need the model number or serial number
for your appliance. This information can be found on the appliance’s data plate.
This tumble dryer complies with all current local and national safety requirements. How-
ever, inappropriate use can lead to personal injury and damage to property.
Read the operating instructions carefully before using the tumble dryer. They contain im-
portant information on safety, installation, use and maintenance. This prevents both per-
sonal injury and damage to the tumble dryer.
In accordance with standard IEC60335-1, Miele expressly and strongly advises that you
read and follow the instructions in the chapter on installing the tumble dryer as well as
the safety instructions and warnings.
Miele cannot be held liable for damage caused by non-compliance with these instruc-
tions.
Keep these operating instructions in a safe place and pass them on to any future owner.
When instructing other people how to use the tumble dryer, they must be made aware of
these safety and warning instructions.
Appropriate use
This tumble dryer complies with current safety requirements. Inappropriate use can,
however, lead to personal injury and damage to property.
It is essential to read these operating instructions before using the tumble dryer for the
first time. They contain important information for your safety, as well as information on
using and maintaining the tumble dryer. This prevents both personal injury and damage
to the machine.
 The tumble dryer is intended for installation in a commercial environment.

Warning and Safety instructions
5
 This tumble dryer is only intended for drying fabrics which have been washed in a water
solution, and marked on the manufacturer's care label as being suitable for tumble drying.
“Dry cleaning kits” for freshening up garments in a tumble dryer are increasingly available
on the market. If using, do so at your own risk, and follow the instructions provided on the
packaging. Any other applications may be dangerous. Miele cannot be held liable for dam-
age resulting from incorrect or improper use or operation.
 The tumble dryer is not intended for outdoor use.
 The tumble dryer must not be used in a non-stationary location (e.g. on a ship).
 Do not install the tumble dryer in a room where there is a risk of frost. At temperatures
around freezing point, the tumble dryer may not be able to operate properly.
A room temperature between 2°C and 40°C is permitted for electrically heated and gas-
heated tumble dryers.
A room temperature between 10°C and 40°C is permitted for tumble dryers with heat
pumps.
 If the machine is used in a commercial environment it may only be operated by instruc-
ted/trained personnel. If the machine is used in a publicly accessible area, the supervisor
must ensure that it can be operated safely without risk of danger.
 This appliance can only be used by people with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, if they are supervised whilst using it or
have been shown how to use it in a safe way and understand and recognise the con-
sequences of incorrect operation.
 Children under 8 years of age must be kept away from the tumble dryer unless they are
constantly supervised.
 Children 8 years and older may only use the tumble dryer unsupervised if they have
been shown how to use it safely and recognise and understand the consequences of in-
correct operation.
 Children must not be allowed to clean or maintain the tumble dryer unsupervised.
 Please supervise children in the vicinity of the tumble dryer and do not let them play
with it.
 This tumble dryer may also be operated in public areas.
 Any uses other than those listed above are prohibited. The manufacturer accepts no li-
ability in such cases.
Foreseeable misuse
 Do not make any alterations to the tumble dryer, unless authorised to do so by Miele.
 Do not lean on the tumble-dryer door. Otherwise, the tumble dryer may tip over, causing
injury to yourself or others.
 Do not use a pressure washer or water jet to clean the tumble dryer.
 The tumble dryer must be serviced in a timely and professional manner. Otherwise,
there is a potential risk of loss in performance, faults and fire.

Warning and Safety instructions
6
 Benzine, petrol, paraffin, or any easily flammable liquid must not be stored or used near
the machine. Danger of explosion.
 Do not expose the dryer to air which is contaminated with vapour of chlorine, fluorine or
other solvents. Danger of fire.
 To prevent the risk of fire, the following items must not be dried in this tumble dryer:
- Items which have not been washed.
- Items which have not been thoroughly cleaned and are still soiled with grease, oil or
other deposits (such as kitchen linens or cosmetics cloths with cooking oils, grease, lo-
tions, etc). If items have not been thoroughly cleaned, there is a danger that they might
ignite when heated, even after they have been removed from the tumble dryer at the
end of the programme.
- Items (e.g. mops and floor cloths) that have been treated with inflammable cleaning
agents or which contain residues of acetone, alcohol, benzene, petrol, kerosene, stain
remover, turpentine, wax and wax remover or other chemicals.
- Items which have been splashed with hair lacquer, hair spray, nail varnish remover or
similar substances.
Wash heavily soiled items thoroughly by increasing the amount of detergent and selecting
a high washing temperature. If in doubt, wash the items several times.
 Danger of squashing or cutting fingers etc. around the drum door hinges and the fluff fil-
ter cover. Use the appropriate handles and release catches only.
 Always make sure that the drum is stationary before reaching in to remove laundry. Do
not touch the drum whilst it is still rotating.
 In many programmes, the heating phase is followed by a cooling down phase to ensure
that the items are not too hot to handle when you remove them (this also avoids the
danger of the laundry self-igniting). The programme is not finished until the cooling down
phase is complete. Ensure that you always wait until the end of the programme before re-
moving the laundry.
Technical safety
 This tumble dryer must only be set up and commissioned by a Miele Service technician
or authorised Miele Service Dealer.
 Before installation check the tumble dryer for any obvious damage. A damaged tumble
dryer must not be installed and/or used.
 Do not connect the tumble dryer to the power supply by an extension lead (fire hazard
due to overheating).
 Do not operate the tumble dryer in a room where cleaning machines operate with
solvents containing CFCs. During combustion, any vapours that are emitted will break
down into hydrochloric acid, leading to consequential damage affecting laundry and the
machine. Air exchange must not take place between rooms if machines are set up in sep-
arate rooms.
 Fire hazard. This tumble dryer must not be connected to a controllable socket (e.g. a
timer). There is a risk of the laundry igniting if the tumble dryer’s safety cooling-down
phase is interrupted.

Warning and Safety instructions
7
 The electrical safety of this tumble dryer can only be guaranteed when correctly earthed.
It is essential that this standard safety requirement is met. If in any doubt, please have the
on-site wiring system tested by a qualified electrician. Miele cannot be held liable for the
consequences of an inadequate earthing system (e.g. electric shock).
 The tumble dryer is only electrically disconnected from the power supply, if
- the plug has been disconnected from the socket.
- it is switched off at the main switch, or the mains electrical fuse is disconnected (on
site).
 The plug must be easily accessible so that the tumble dryer can be disconnected from
the power supply at any time. The operator must be able to check from any access point
that the plug is still removed.
 If the appliance is hard wired, adequate provision must be made on site to switch off all
poles to disconnect the tumble dryer from the power supply.
 If the mains connection cable is faulty it must always be replaced by a Miele authorised
technician to protect the user from danger.
 Tumble dryers with damage to the control panel or wire insulation must not be used until
they have been repaired.
 Unauthorised repairs could result in unforeseen dangers for the user, for which Miele
cannot accept liability. Repairs should only be undertaken by a Miele authorised techni-
cian, otherwise any subsequent damage will not be covered by the warranty.
 Faulty components may only be replaced by genuine Miele spare parts. Miele can only
guarantee the safety standards of the appliance when Miele replacement parts are used.
 Only operate the tumble dryer when all removable outer panels are in place so that it is
impossible to touch an electrical component or moving part.
 During the drying process, the door glass and the frame around the drum door will get
hot. Please be aware that the laundry may also be hot if it is removed from the tumble
dryer before the end of the drying programme.
 In the event of a fault and for cleaning and maintenance purposes, the tumble dryer
must be disconnected from the power supply. The tumble dryer is only disconnected from
the power supply, if:
- It is switched off at the wall socket or the plug is withdrawn.
- The mains fuse is disconnected.
- The mains fuses have been completely removed.
 If the heater element malfunctions, accessible parts can get very hot.
 Only allow clean, fresh air to be fed into the tumble dryer. Air entering the machine must
not contain vapours with chlorine, fluorine or other solvents.
 Electrically heated and gas-heated tumble dryers may only be operated when the vent
ducting has been installed and the room is sufficiently ventilated. Vent ducting is not re-
quired for tumble dryers with heat pump.
 The vent ducting must never be installed in any of the following flues or shafts:
- Chimneys or smokestacks that are in use.

Warning and Safety instructions
8
- Shafts that are used to ventilate installation rooms with fireplaces.
- Flues that are used by third parties.
Smoke or exhaust gas that is fed back into the flue or shaft may be toxic.
 Regularly check all components in the vent ducting (e.g. wall pipe, external grille, bends,
elbows, etc.) to make sure air can move through them and to ensure that they are working
properly. Clean components when necessary. Fluff deposits in the vent ducting system will
prevent the air from being extracted properly and, as a result, will stop the tumble dryer
from working properly.
If existing vent ducting is due to be used, it must be checked before being connected to
the tumble dryer.
Low pressure must not occur in the vent ducting.
 There is a risk of suffocation and poisoning due to exhaust gases being sucked back if
gas-powered flow heaters, gas-powered room heaters, coal-burning stoves with a flue
connection, etc., are installed in the same room, in the same flat or in neighbouring rooms
and the negative pressure is 4Pa or more.
The following measures for suitable room ventilation (examples) can help to prevent negat-
ive pressure in the installation area:
- Install vents that cannot be closed in the exterior walls.
- Use window switches so that the tumble dryer can only be switched on when a window
is open.
Please always seek approval from your building regulations inspector to confirm that the
appliance can be operated without risk and that negative pressure of over 4Pa can be pre-
vented.
 If multiple tumble dryers are to be connected to one vent ducting, a non-return flap must
be installed directly on the duct for each tumble dryer.
If this requirement is not observed, the tumble dryers may be damaged and their electrical
safety could be affected.
 Ensure that no closeable door, sliding door or an oppositely hinged door is installed that
would hinder the drum door being opened in any way.
Gas-heated tumble dryers
 In the event of a fault or when carrying out cleaning and maintenance, the on-site
manual gas shut-off valve and the shut-off device on the gas meter must be closed.
 Before completing commissioning, maintenance, conversion and repair work, all gas-
conducting components – from the manual shut-off valve to the burner jet – must be
checked for leaks. Particular attention must be paid to the measurement connections on
the gas valve and on the burner. Checks must be performed when the burner is both
switched on and switched off.
 Carry out an annual visual inspection of the gas lines and gas appliances in your home.
This inspection must comply with applicable national regulations.
Take these safety precautions if you smell gas
- Extinguish all flames immediately.

Warning and Safety instructions
9
- Close the on-site gas shut-off device, the gas shut-off device on the gas meter or the
main gas shut-off device immediately.
- Open all windows and doors immediately.
- Do not light any naked flames (e.g. matches or lighters).
- Do not smoke.
- If there is the smell of gas in a room, never enter the room with a naked flame.
- Do not carry out any actions that will create electrical sparks (such as pulling out elec-
trical plugs or pressing electrical switches or bells).
- If you cannot find the cause of the gas smell and all gas valves have been shut off,
please call the gas supply company immediately.
If other persons are being shown how to operate the appliance, they must be given and/
or made aware of these important safety precautions.
Correct use
 Do not damage, remove or bypass the safety features and control elements of the
tumble dryer.
 Always close the drum door after each drying cycle. This will prevent:
- Children climbing into the tumble dryer or hiding things in it.
- Pets or other small animals climbing into the tumble dryer.
 Keep the room where the tumble dryer is located free from dust and fluff. If the air that is
taken into the machine contains dirt particles, this can cause blockages. A fault may then
occur and there is a risk of fire.
 Never operate the tumble dryer without the fluff filter or with a damaged fluff filter. This
could lead to malfunctions. Fluff can clog the air channels, heating elements and vent
ducting, which could result in a fire. In this case, stop the tumble dryer immediately and re-
place the damaged fluff filter.
 The fluff filter must be cleaned on a regular basis.
 To ensure problem-free operation of the tumble dryer:
- Clean the surface of the fluff filter after each drying cycle.
- In addition, the fluff filter and the air passages must be cleaned when prompted by the
display.
 Remove all items from the pockets of the laundry to be dried (e.g. lighters, matches,
keys).
 The programme ends when the cooling phase starts. Many programmes are followed by
the cooling phase to ensure that the items of laundry are kept at a temperature that will not
cause them damage (for instance to prevent the risk of the laundry self-igniting). Always re-
move all items of laundry from the tumble dryer immediately after the cooling phase.
 Accessory parts may only be fitted when expressly approved by Miele. If other parts are
used, warranty, performance and product liability claims will be invalidated.
Miele cannot be held liable for damage caused by non-compliance with these Warn-
ing and Safety instructions.

Description of the machine
10
PDR511SL(with heat pump)
8
6
9
7
1
4
5
2
3
aControl panel
bRotary control
Turn the rotary control to switch on the tumble dryer and select the drying programme.
cDrum door
The drum door is opened by pulling the door handle.
dFluff filter compartment cover with handle
The fluff filter compartment cover is opened by turning the handle. The fluff filter is be-
hind the fluff filter compartment.
eScrew foot (4 feet)
To ensure that the tumble dryer is aligned, its height can be adjusted by turning the feet.
fElectrical connection
The permitted supply voltage is specified on the data plate of the tumble dryer.
gAir intake vent
hCondensate drainage
iCommunication slot for communication module

Description of the machine
11
PDR516SL(electrically heated)
8
6
9
7
1
4
5
2
3
aControl panel
bRotary control
Turn the rotary control to switch on the tumble dryer and select the drying programme.
cDrum door
The drum door is opened by pulling the door handle.
dFluff filter compartment cover with handle
The fluff filter compartment cover is opened by turning the handle. The fluff filter is be-
hind the fluff filter compartment.
eScrew foot (4 feet)
To ensure that the tumble dryer is aligned, its height can be adjusted by turning the feet.
fElectrical connection
The permitted supply voltage is specified on the data plate of the tumble dryer.
gAir intake vent
hExhaust duct
iCommunication slot for communication module

Description of the machine
12
PDR516SL(gas heated)
8
6
9
7
1
4
5
2
3
10
aControl panel
bRotary control
Turn the rotary control to switch on the tumble dryer and select the drying programme.
cDrum door
The drum door is opened by pulling the door handle.
dFluff filter compartment cover with handle
The fluff filter compartment cover is opened by turning the handle. The fluff filter is be-
hind the fluff filter compartment.
eScrew foot (4 feet)
To ensure that the tumble dryer is aligned, its height can be adjusted by turning the feet.
fElectrical connection
The permitted supply voltage is specified on the data plate of the tumble dryer.
gAir intake vent
hExhaust duct
iCommunication slot for communication module
jGas connection

Operating the tumble dryer
13
Machines with residual moisture control (ROP)
1 2 3 4 56 7 8 9
aControl field
bSensor controls for the drying levels
cStatus displays  
Light up when necessary.
dsensor control
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and
cloths. The function is deactivated as a factory default setting and can only be activated
and set by the MieleCustomer Service Department.
eTimedisplay
Displays the remaining programme running time in hours and minutes.
f  sensor controls
For the Delay start function. After touching the sensor control, a later start time for
the programme (Delay start) can be selected. The sensor control lights up brightly
when selected.
The duration of the Delay start period is selected by touching the orsensor control.
g/sensor control
For starting the selected drying programme and cancelling a programme once it has
started. The programme selected can be started as soon as the sensor control starts
flashing.
hOptical interface
Used for data transfer by the Customer Service Department.
iProgramme selector
For selecting programmes and for switching the machine off. The tumble dryer is
switched on when you select a programme and switched off by turning the programme
selector to the position.

Operating the tumble dryer
14
Drying levels -sensor control = “Normal plus”
-sensor control = “Normal”
-sensor control = “Hand iron”
-sensor control = “Machine iron”
-sensor control: “Duvets” function
Drying pro-
grammes
-position = “Cottons”programme
For drying cotton and linen fabrics.
-position = “CottonsLow temperature”programme
For drying delicate cotton and linen fabrics.
-position = “Synthetics/Delicates” programme
For drying synthetic fibres and artificial silk to 20% residual mois-
ture.
- PROposition = “Label programme” programme
- position = “Label programme” programme
-position = “Timed drying cool air”programme
For airing fabrics with 10minutes of drying time.
-position = “Timed drying warm air”programme
For drying fabrics at high temperatures and with 20minutes of dry-
ing time
-position = “Woollens”programme
For drying woollens with 5minutes of drying time.
-position = “Minimum ironLow temperature”programme
-position = “Minimum iron”programme
-position = machine off

Operating the tumble dryer
15
Machines with time control (TOP)
1 2 3 4 56 7 8 9
aControl field
bSensor controls for the drying levels
cStatus displays  
Light up when necessary.
dsensor control
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and
cloths. The function is deactivated as a factory default setting and can only be activated
and set by the MieleCustomer Service Department.
eTimedisplay
Displays the remaining programme running time in hours and minutes.
f  sensor controls
For the Delay start function. After touching the sensor control, a later start time for
the programme (Delay start) can be selected. The sensor control lights up brightly
when selected.
The duration of the Delay start period is selected by touching the orsensor control.
g/sensor control
For starting the selected drying programme and cancelling a programme once it has
started. The programme selected can be started as soon as the sensor control starts
flashing.
hOptical interface
Used for data transfer by the Customer Service Department.
iTime selector
For selecting times and for switching the machine off. The tumble dryer is switched on
when you select a time and switched off based on the position of the time selector.

Operating the tumble dryer
16
Temperature set-
tings (TOP)
-sensor control = “high” temperature setting
-sensor control = “medium” temperature setting
-sensor control = “low” temperature setting
-sensor control = “cool” temperature setting
Timed pro-
grammes
- position 5 = Timed programme 5minutes
- position 10-55 = Timed programme 10–55minutes
- position 60= Timed programme 60minutes
-position = machine off

Operating the tumble dryer
17
Machines with payment systems (COP)
1 2 3456 7 8
aControl field
bStatus displays   
Light up when necessary.
csensor control
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and
cloths. The function is deactivated as a factory default setting and can only be activated
and set by the MieleCustomer Service Department.
dTimedisplay
Displays the remaining programme running time in hours and minutes.
e  sensor controls
For the Delay start function. After touching the sensor control, a later start time for
the programme (Delay start) can be selected. The sensor control lights up brightly
when selected.
The duration of the Delay start period is selected by touching the orsensor control.
f/sensor control
For starting the selected drying programme and cancelling a programme once it has
started. The programme selected can be started as soon as the sensor control starts
flashing.
gOptical interface
Used for data transfer by the Customer Service Department.
hTemperature setting selector
For selecting temperature settings and for switching the machine off. The tumble dryer
is switched on when you select a temperature setting and switched off at temperature
selector setting.

Operating the tumble dryer
18
Drying pro-
grammes
-position range = cool temperature setting
For airing fabrics.
-position range = “low” temperature setting
For drying delicates made from artificial silk or synthetic fibres.
-position range = “medium” temperature setting
For drying easy-care synthetics and mixed fibres.
-position range = “high” temperature setting
For drying cotton and linen fabrics.
-position = machine off

Operating the tumble dryer
19
How the control field works
The sensor controls react to fingertip contact. If a sensor control is
lit, it can be selected.
If a sensor control is brightly lit, this means it is currently selected.
If a sensor control is dimly lit, this means it can be selected.
Sensor controls
for the drying
levels
After selecting a drying level programme with the programme se-
lector, the recommended drying level lights up. Drying levels that
can be selected are dimly lit.
Drying levels -sensor control = “Normal plus”
-sensor control = “Normal”
-sensor control = “Hand iron”
-sensor control = “Machine iron”
Temperature set-
tings (TOP)
-sensor control = “high” temperature setting
-sensor control = “medium” temperature setting
-sensor control = “low” temperature setting
-sensor control = “cool” temperature setting
Drying levels in
payment system
operation
-sensor control = “high” temperature setting
-sensor control = “medium” temperature setting
-sensor control = “low” temperature setting
-sensor control = “cool” temperature setting
Indicators -indicator light: lights up when the fluff filter needs cleaning.
-indicator light: lights up if a fault is present in the ducting.
-indicator light (gas-heated machines only): lights up when the
heating is active.
-indicator light (machines with payment system only): lights up
when payment has been made.
-time display: the remaining programme running time is dis-
played in hours and minutes. With most programmes, the duration
displayed may vary or “jump”. The following factors, among others,
affect the programme duration displayed: the quantity of laundry,
the type of fabric and the residual moisture in the laundry. The elec-
tronic module adapts to these parameters and then adjusts the pro-
gramme duration with increasing accuracy.

Drying
20
1. Notes on correct laundry care
Washing before
drying
Heavily soiled laundry must be washed particularly thoroughly. Use
sufficient detergent and select a high wash temperature. If in doubt,
wash the items several times.
The tumble dryer must not be used for drying items of laundry
which have been cleaned using industrial chemicals.
New and coloured items must be washed thoroughly and separately.
Do not dry new and coloured items with light coloured garments.
There is the risk of colours running and discolouring other garments
or even plastic components in the tumble dryer. Dark coloured fluff
can also settle on light coloured garments and vice versa.
Preparing the
laundry Not all fabrics are suitable for drying in a tumble dryer. Please ob-
serve the symbols on the fabric care label.
Observe the instructions on the laundry care label:
-Dry at normal temperature
-Dry at low temperature
-Do not tumble dry
Tip: For even drying results and to avoid damaging fabrics, sort the
laundry by fibre and weave.
Fire hazard due to drying unsuitable fabrics.
Machine drying unsuitable textiles poses a fire hazard.
Only tumble dry items that have a care label stating that they are
suitable for tumble drying.
The following fabrics must not be dried in a tumble dryer:
- Fabrics which contain a large proportion of rubber, foam rubber or
rubber-like materials.
- Fabrics treated with inflammable cleaning agents.
- Items which have been splashed with hair lacquer, hair spray, nail
varnish remover or similar substances.
- Items soiled with oil, grease and similar residues, e.g. kitchen linen
and linen used in beauty clinics.
- Items such as mop heads and floor cloths containing residual wax
or chemicals.
- Damaged items that contain fillings, e.g. pillows and jackets.
- Fabrics contaminated by greases and oils that have not been ad-
equately washed. Use a heavy-duty detergent for very heavily
soiled items (e.g. workwear). Please seek advice from the detergent
and cleaning agent manufacturer in this regard.
Removing foreign
objects
Before drying, ensure that there are no foreign objects in the laundry.