Miele T 6351 User manual

Operating Instructions
Tumble Dryers
T 6351
T 6551
T 6751
To prevent accidents
and machine damage read these ö]
instructions before installation or
use. M. Nr. 05 640 910

2 M. Nr. 05640910

Contents
Page
WARNING AND SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Guide to the tumb e dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pushbuttons / program selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Additional display with selector button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Program sequence and fault indicators / fault messages . . . . . . . . . . . . . . . . . . . . 10
”Reset” button / Emergency Stop button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Preparation of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Weight of loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Program se ection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Anti crease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Interrupting a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Emergency Stop button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reprogramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the preset options of a drying program examples . . . . . . . . . . . . . . . . . . 16
Reprogramming possibilities / Programmable residual moisture . . . . . . . . . . . . . . . . . 19
C eaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Guide to the data p ate symbo s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Insta ation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Leveling the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Steam connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
M. Nr. 05640910 3

WARNING AND SAFETY INSTRUCTIONS
Installation, repair and maintenance work
should be by a Miele authorized service
technician. Work by unqualified persons
could be dangerous and may void the war
ranty.
Read all instructions before installation or use
of the tumble dryer to prevent injury and ma
chine damage.
The tumble dryer is only intended for dry
ing fabrics washed in a water solution.
Check fabric care labels to verify materials
can be machine dried.
To prevent fires, do not use this tumb e
dryer to dry the fo owing:
–Articles containing foam rubber, rubber or
rubber like materials.
–Articles which have been treated with
flammable cleaning agents.
–Articles which have been splashed with
hair lacquer, hair spray, nail varnish re
mover, etc.
–Clothing which may be greasy,
fatty or impregnated with other residues.
Do not dry mops, floor cloths etc in this ma
chine if they contain substances such as
wax or chemical cleaning agents.
Padded or filled fabrics (e.g. jackets or
cushions) should not be dried. Loose fill
ing could cause a fire.
Some textiles get very hot during drying
and there may be a risk of high tempera
tures causing them to ignite in exceptional cir
cumstances. They should therefore be taken
out of the machine as soon as the program
has finished and as soon as possible if there
has been a power failure. It is advisable to
keep a fire extinguisher near the machine at
all times.
Laundry must not be removed from the
dryer before the drying program has
finished, i.e., the coo ing down phase must
be comp eted.
If hot laundry items are stacked or packed
they can be liable to auto combustion.
Do not let children play in or near the ma
chine. Do not let them play with the con
trols or operate the unit.
Make sure the drum is stationary be
fore removing laundry. Never put you
hand into a drum that is still moving.
Installation, repair and maintenance work
should be by a Miele authorized service
technician. Work by unqualified persons
could be dangerous.
Be certain your appliance is properly in
stalled and grounded by a qualified techni
cian.
To guarantee the electrical safety of this ap
pliance, continuity must exist between the ap
pliance and an effective grounding system. It
is imperative that this basic safety requirement
be met. If there is any doubt, have the electri
cal system of the house checked by a quali
fied electrician. The manufacturer cannot be
held responsible for damages caused by the
lack, or inadequacy of, an effective grounding
system.
Before installation or service, disconnect
the power supply to the work area by re
moving the fuse, ”tripping” the circuit breaker,
or unplugging the unit.
Do not damage, remove or bypass the
safety components, fixtures and control
elements of this machine.
Where there is any damage to the controls
or to the cable insulation the machine
must not be used until it has been repaired.
Faulty components must only be ex
changed for Miele original spare parts.
Only when these parts are fitted can the
safety standards of the machine be guaran
teed.
Do not touch the steam pipes and compo
nents, there is a danger of burns.
When disposing of an old machine, pre
vent hazards to children by removing the
drum door and the lint filter access panel.
Only use the dryer if all panels are
properly in place.
Fire and Exp osion hazard
Never use or store gas or gasoline based
substances or any easily flammable sub
stances near the machine.
Fire hazard
Do not use the machine without the built in
lint filter in place. If the lint filter is damaged it
must be replaced immediately.
A build up of lint could block the airflow heat
ing and ventilation, and impair the efficiency of
the machine.
4 M. Nr. 05640910

WARNING AND SAFETY INSTRUCTIONS
Disinfecting and cleaning agents often con
tain chlorides (salts) that can cause steel
surfaces to rust. To protect your machine from
rust damage, only use chloride free disinfec
ting and cleaning agents for laundry and disin
fecting and for cleaning the machine. If you
are not sure about a particular agent contact
Miele’s Professional Division.
If you accidentally spill an agent containing
chloride on the machine it should be rinsed off
with water and dried with a soft cloth.
Do not use a high-pressure c eaner or
water jet to clean the machine.
Caution If the tumble dryer shuts off dur
ing the drying cycle, without the fault indi
cation light showing, a temperature limiter has
activated.
Check the seals and locks on the machine
door and the lint filter.
Check the condition of the air inlet and air out
let vents. If no damage is evident to any of
the parts checked, the dryer can be restarted.
If the fault occurs again, call the Miele Techni
cal Service Department.
Accessories
Only use genuine Miele accessories. If
other parts are used, guarantee, performance
and product liability claims may become void.
Disposa of an o d app iance
When discarding an old appliance, discon
nect the power supply, remove the power cord
and any doors.
All personnel working with this machine must
be fully trained in all aspects of its use and
safety.
KEEP THESE OPERATING INSTRUCTIONS
IN A SAFE PLACE
M. Nr. 05640910 5

Caring for the environment
Disposa of the packing materia
The transport and protective packing
are environmentally friendly for
disposal and can be recycled.
Please recycle.
Disposa of an o d machine
Old machines contain materials which can be
recycled. Please contact your local recycling
authority about the possibility of recycling
these materials.
6 M. Nr. 05640910

Guide to the tumble dryer
1Main power switch 5Lint filter
2Control panel 6Lint compartment flap
3Drum door 7Four adjustable screw feet
4Door handle 8Vent pipe / Vent socket
Contro pane
9 Program sequence/Fault indicators
10 Program selector with selector button
11 Push buttons
12 Additional display
13 "Emergency Stop" button
1
2
3
4
85
6
7
9 10 11 12 13
M. Nr. 05640910 7

Description of the machine
Push buttons
”On-Off s” button
”L Low temperature” button
Lowers the drying temperature for delicate fab
rics (e.g. acrylics).
Press in the button to select this feature.
”l Buzzer” button
The end of a program can be indicated by a
buzzer.
Press in the button to select this feature.
”h ”Start" button
This button starts the program when pushed
in.
Program se ector
The program selector is used to select the pro
gram required.
A COTTONS
Residual moisture value T6351 T6551/6751
1 Extra dry ( 4%) ( 4%)
2 Normal + ( 2%) ( 2%)
3 Normal (3%) (3%)
4 Machine iron r(13%) (16%)
5 Machine iron rr (20%) (22%)
6 Machine iron rrr (26%) (30%)
B MINIMUM IRON
7 Normal + ( 2%) ( 2%)
8 Normal (2%) (2%)
9 Machine iron r(8%) (8%)
C TIMED DRYING
0 without heating (15 min) (15 min)
! with heating (20 min) (20 min)
r End
All the values given in brackets are preset standards.
And can be altered (see the following pages).
8 M. Nr. 05640910

Description of the machine
Additiona disp ay with se ector button
Se ector button "Residua moisture" /
"Time" / "Vented air"
"Residua moisture"
With this button the programmed residual
moisture values in programs 1 to 9 can be
changed.
Changes can only be made before the start of
the program. At the end of the cycle the pro
gram will revert to the preset standards.
"Time"
With this button the program duration can be
changed in program 0 (3 minutes to 1 hour)
and in program! (3 minutes to 3 hours).
Changes can only be made before the start of
the program. At the end of the cycle the pro
gram will revert to the preset standards.
"Vented air"
If the button is pressed in while a program is
running and released immediately the current
vented air temperature will appear in the addi
tional display for 5 seconds.
Disp ay "Residua moisture" / "Time" /
"Vented air"
"Residua moisture"
Displays the residual moisture set for pro
grams 1 to 9 .
A few minutes after the program has started
the residual moisture in the laundry is
recorded and displayed. The current residual
moisture value is shown during the program.
"Time"
Displays the time set for program 0 or ! .
The hours are shown in the left display field
and the minutes in the right fields. After the
program has started the remaining run time is
shown instead of the total time.
"Vented air"
Displays the current vented air temperature for
5 seconds while a program is running.
Indicator ights
"Residua moisture" / "Time"
"Residua moisture"
Lights up when the machine is turned on and
program 1 to 9 is chosen.
It goes out at the end of the program.
"Time"
Lights up when the machine is turned on and
a program between 0 and ! is chosen.
It goes out at the end of the program.
Selector button
Display Indicator lights
M. Nr. 05640910 9

Description of the machine
Program sequence and fau t indicators
Fau t messages
Faults or interruptions are indicated by the se
quence lights/fault indicators flashing.
The messages are:
”Heating”
Fault in the heating system.
Action: Call Miele’s Technical Service
Department.
”Safety period”
The maximum running time of the drying pro
gram was exceeded because the residual
moisture at the start of the program was too
high.
Action: Restart the drying program.
If the fault message occurs again contact the
Miele Technical Service Department.
”Venting”
The venting duct is obstructed.
Action: Check the vent ducting and clean if
necessary.
”Lint fi ter”
The lint filter is clogged.
Action: Clean the lint filter at the end of the pro
gram.
Note:
The "Drying", "Cool air" and "Anti crease" indi
cators will flash if there is a power failure or if
a program has been interrupted (e.g. when a
door has been opened). They do not indicate
a fault. The indicators will stop
flashing once the "Start" button is pressed.
Heating
(flashes)
Safety period
(flashes)
Gas/Venting
(lights up)
Lint filter
(lights up)
On
Drying
Cool air
Anti crease/End
Check venting
Check lint filter
10 M. Nr. 05640910

Description of the machine
"Emergency Stop" button
Only use in an emergency.
Do not use this button to turn off the machine
during normal operation.
To reset the "Emergency Stop" button after it
has been used, turn the ribbed knob clock
wise.
Conversion of °C to °F
°C °F °C °F
10 50 70 158
20 68 80 176
30 86 90 194
40 104 100 212
50 122 110 230
60 140 120 248
M. Nr. 05640910 11

Before using for the first time
Before using for the first time, wipe the inside
of the drum with a soft dry cloth.
Preparing the aundry
Sort the laundry according to fabric type and
weave for even drying results.
Not all textiles are suitable for drying. Pay spe
cial attention to the manufacturer’s instructions
on the wash care label.
q = Dry at normal temperature
r = Dry at low temperature
s = Do not tumble dry
Do not tumble dry articles made from pure
wool and wool mix
tures as they tend to become matted and
shrink.
Pure linen is liable to be rough
ened by tumble drying. Consult the manufac
turer’s instructions before drying.
Important: Items with metal buck les, hooks,
eyes, zippers etc. should be put into the dryer
in a cloth bag (eg. pillowcase) to protect the
drum from scratches and dents.
Items with zippers should be dried with the zip
pers open.
Padded or filled fabrics (eg. jackets or cush
ions) should not be dried. Loose filling falls
could cause a fire.
Some woven and loop knit materials shrink
with over drying. Avoid the Extra dry program
for such fabrics.
If drying starched laundry, select the most suit
able program for ironing by hand or machine.
Sort the laundry according to the level of dry
ness required. It is not necessary to sort ac
cording to size.
For cost efficiency, only dry full loads. Over
loading the dryer will impair the drying result
and the laundry finish.
Loading the machine
Weights of oad (Dry weight)
T 6351 T 6551 T 6751
Cottons
max.
6 lbs max. 10 lbs max. 14 lbs
Minimum Iron and De icates
max.
2 lbs max. 3 lbs max. 5 lbs
Wet C eaning
Cotton, Jeans/Corduroy,
Poplin without wool lining,
Padded jackets
max.
5 lbs max. 7 lbs max. 9 lbs
Wool, Wool/Cotton, Wool/Syn
thetic,
Angora, Cashmere, Lamb’s wool,
Silk,
Viscose
max.
2 lbs max. 3 lbs max. 5 lbs
Bedding
max.
3 lbs max. 5 lbs max. 7 lbs
12 M. Nr. 05640910

Selecting a program
Close the drum door.
Turn on the power main
(on site).
Press in the “s On/Off” button.
Select a program by turning the program
selector clockwise or counterclockwise:
A COTTONS
For drying cotton/linen textiles
Residual moisture T6351 T6551/6751
1 Extra dry ( 4%) ( 4%)
2 Normal + ( 2%) ( 2%)
3 Normal (3%) (3%)
4 Machine Iron r(13%) (16%)
5 Machine Iron rr (20%) (22%)
6 Machine Iron rrr (26%) (30%)
B MINIMUM IRON
For drying polyester cotton mixtures,
delicates and synthetics
7 Normal + ( 2%) ( 2%)
8 Normal (2%) (2%)
9 Hand Iron r(8%) (8%)
C TIMED DRYING
Airing and timed drying
0 without heating (15 mins)
For airing laundry
! with heating (20 mins)
To dry small loads or
to dry individual items.
The “L Low temperature” and “l Buzzer”
features can be selected at this time.
Note: The dryer uses an electronic sensor
system which monitors the residual mois
ture in the laundry and a timer for extra
safety. The heating time is limited to 60
minutes.
Once the required level of dryness has
been reached the laundry is cooled and
the drying program ends.
Special programs
1. Wet C eaning
For drying washable materials which are
also stated on the laundry care label to be
suitable for machine drying *:
A/2
Poplin without wool lining *, padded
garments *
A/2 + “L Low temperature” button
Jeans, Corduroy trousers
A/3 Cotton
A/3 + “L Low temperature” button
Cotton/Synthetic
A/4 + “L Low temperature” button
Wool /Cotton, Wool/Synthetic
C/!
Wool, Angora, Cashmere, Lambs wool, Silk,
Viscose etc.
M. Nr. 05640910 13

Selecting a program
2. Bedding
To dry bedding, which has a laundry care
label stating that it is machine washable:
C/!
Bedding (e.g. non seamed duvets, seamed/
pocketed feather duvets, synthetic duvets,
pillows, etc.)
Important: Before drying bedding the standard
options must be
reprogrammed with A / 1, A / 2 and A / 4
(see, Table "Reprogramming possibilities").
See, "Reprogramming" for conditions and
examples.
Note: The duration of the C / ! program is
preset to 20 minutes. See, Table "Repro
gramming possibilities").
A change to the duration of the program can
be made by reprogramming for B / 9 "with
heating (followed by Cooling down) Pro
gram 11 ", (see, Table "Reprogramming possi
bilities").
If required also select the “l Buzzer”
functions.
Press the “h Start” button.
The selected drying program will now
start.
Note
The “l Check lint filter” light comes on if the
lint filter needs to be cleaned. Clean the filter
as soon as the program has finished. See,
"Cleaning and Care" for details.
The laundry must not be removed from the
dryer before the drying program has finished,
ie, the cooling down phase must be com
pleted.
If hot laundry items are stacked or packed
they could auto combust.
If the laundry is rinsed with hot water in the
final rinse, the residual heat in the laundry,
together with the reduced residual moisture
content, will lead to shorter processing times
and save energy.
The end of the drying program is indi-
cated by the “ ~ r Anti-crease / End” in-
dicator ighting up and the buzzer
sounding if se ected.
Turn the program selector to “r End”.
Open the drum door.
Remove the laundry.
If the dryer is not going to be used again in
the near future:
Press the “s On/Off” button to turn off the
machine.
Turn off power at the site power main.
Clean the lint filter.
14 M. Nr. 05640910

Selecting a program
Anti-crease
If the laundry is not removed from the machine
at the end of the program an anti crease cycle
will automatically start. The drum turns at in
tervals to minimize creasing in the laundry.
The anti crease cycle runs 59 minutes.
Interrupting the program
The program will stop if the door is opened
during operation to add or remove articles of
laundry. The program will also be interrupted if
the lint filter compartment flap is opened or the
"Emergency Stop" button pressed. Do not
reach into a moving drum.
To continue the drying process:
Close the drum door.
Press the “h Start” button".
If a new program is selected, first turn the pro
gram selector to “End” and then to the desired
program. Press “Start”.
The “On” indicator will flash if the program se
lector is turned to a different position after the
start of a program. It will stop
flashing when the program selector is turned
back to the originally
selected program or is turned to “End” to finish
the program.
"Emergency Stop" button
Use this button only in an emergency. The
dryer will shut off immediately. Do not use this
button in normal operation to turn the machine
off.
Turn the ribbed disc clockwise to reset the
"Emergency Stop" button.
M. Nr. 05640910 15

Reprogramming
Changing the preset options of a drying
program
Individual drying programs can be repro
grammed to meet special requirements,
usage and processes.
Examp e of reprogramming
Basic position:
The dryer must be off and the drum door
closed.
All buttons must also be in the “Off” position,
i.e. released not pressed in.
The program selector must be at the
“r End” position.
Press in the “s On Off” switch.
The “On” indicator will light.
Press the “L low temperature” button twice in
and twice out within 4 seconds:
After a few seconds the letter “P” lights up in
the left field of the additional display.
The program sequence indicator “Drying” will
light and “Cold air” will flash.
The unit can now be reprogrammed, see
examples 1 and 2 on the following pages.
➧
➧
16 M. Nr. 05640910

Reprogramming
Examp e 1:
Reprogramming the drum reversing action
period (standard = 1 minute and 27 seconds)
in the cotton programs.
A drum reversing action period can be se
lected from 20 seconds to 2 minutes.
Here a reversing time of 1 minute and 5 sec
onds is chosen.
Turn the program selector to program A / 1.
The following will alternate in the additional
display:
or
Press and release the “Start” button until “I 05"
appears in the additional display.
Turn the program selector to the"r End"
position.
The changed drum reversing action pe
riod in the cottons programs is now stored in
memory.
To exit programming:
Press the “s On/Off”button.
Please enter any program changes to the
"Reprogramming possibilities" chart.
Examp e 2:
Changing the residual moisture value in pro
gram 5 to 5 Machine iron rr (20%).
Residual moisture values can be selected be
tween 18 and 22%.
Here a residual moisture value of 18% is se
lected.
Go to the basic position for reprogramming
(see example 1).
➧
M. Nr. 05640910 17

Reprogramming
Turn the program selector to A / 3 .
“P3" and ”3" will alternate in the additional
display.
Use the selector switch to choose the pro
gram to be changed.
Program 5 Machine iron rr (20%).
Press the selector until a residual moisture of
20% appears in the additional display.
Press the “h Start” button repeatedly to select
the residual moisture of 18%.
Turn the program selector to the"r End"
position.
The change to the residual moisture value is
now stored in memory and the programming
process is complete.
To exit programming:
Release the “s On/Off” button.
Please enter any program changes to the
"Reprogramming possibilities" chart.
➧
➧
18 M. Nr. 05640910

Reprogramming
Reprogramming possibilities
ö
]
Program
a terations Position of the Program
se ector
Options Notes Enter
program
changes
here
Standard WC Bedd
ing Adjustable
Cottons
Reversing time*
in the Cottons
Programes 1 to 6
and Timed drying
programes 10 & 11
A
11 minute and
27 seconds 25 secs 25 secs 20 seconds to
2 minutes
*)Drum reverses to the left
and to the right in pro
grammed timed intervals
Reversing off /
Pause interval
in Cottons
programes 1 to 6
and Timed drying
programes 10 & 11
23
seconds 10 secs 0 (Off) or
2 to 10
seconds
Residual moisture/
Prog. selection with the
Selector switch 3see chart
"Programmable
residual
moisture"
Call up the residual moisture
values to be changed with
the selector switch and alter
with the start button.
Fan and heating
in pause times 41 0 0 0 or 1 1 = On
0 = Off
Cooling down temperature
Vented air to 550 oC 40 °C 30 to 60 oC
Reversing time*
in the Minimum iron
programes 7 to 9 61 minute
27 seconds 55 secs 20 seconds to
2 minutes
Minimum iron
Reversing off/
Pause interval
in Minimum iron
programes 7 to 9 B
73
seconds 0 (Off) or
2 to 10
seconds
without heating
Program 10 815
minutes 3 minutes to
1 hour
with heating
followed by Cooling down
Program 11 920
minutes 3 mins 3 minutes to
3 hours
add to this cooling down
time to a cool temperature
of 50 oC (Standard value).
Timed drying
Additional display
during operation C00 2 0, 1 or 2 0 = Residual moisture (temperature display for
5 secs, after the selector
button is pressed)
1 = temperature only
2 = residual moisture only

!

Programme position is not
occupied.
Programmable residual moisture values
Program T 6351
Options T 6551 / T 6751 Options Notes Enter program
changes here
Standard Adjustable Standard Adjustable
A
1 4 % 3 % or 5 % 4 % 3 % or 5 %
2 2 % 1 or 0% 2 % 1 or 0%
33 % 1 % or 5 % 3 % 1 % or 5 %
413 % 8 % or 16 % 16 % 8 % or 13 %
520 % 18 % or 22 % 22 % 18 % or 20 %
626 % 24 % or 30 % 30 % 24 % or 26 %
B7 2 % 0 % or 3 % 2 % 0 % or 3 %
82 % 1 % or 4 % 2 % 1 % or 4 %
98 % 5 % or 10 % 8 % 5 % or 10 %
The stored residual moisture values for the individual programs are shown in the additional display after the selector is
pressed. The sequence of the displayed residual moisture values for the programs is as follows: A/3, A/2, A/1, B/9,
B/8, B/7, A/6, A/5, A/4
M. Nr. 05640910 19

Cleaning and care
Before cleaning disconnect the machine from
the power supply via the mains switch.
Do not use a high pressure c eaner or
water jet to c ean the machine.
C eaning:
Clean the lint filter (5) at least once a day and
when the “Clean lint filter” indicator light
comes on. Do not remove the lint filter.
Scoop out the lint and be careful not to dam
age the filter.
After drying starched laundry the drum should
be wiped out with a soft, damp cloth.
The housing, control panel and plastic parts
can be cleaned using a mi d non abrasive
cleanser with a soft, damp cloth and then
dried.
Stainless steel surfaces should be cleaned
with a stainless steel cleaner.
Never use abrasive c eaning agents to
c ean the machine.
The following should be checked and if neces
sary serviced once a year by an authorized
Miele Service technician:
Heater element and heater shaft.
The whole interior of the tumble dryer
Fins on the ventilation fan
If proper maintenance is not performed regu
larly the machine may be damaged and oper
ational faults posing a fire hazard could occur.
If there is there is a problem, please contact:
Miele Technical Service
1 800 999 1360
[email protected]m
When contacting the Customer Service De
partment please quote the model and serial
number of the machine.
These can be found on the data plate:
with the door open, or:
at the rear of the machine next to the exhaust
connection.
Guide to the data plate
Typ Model type
Fabr. Nr. Serial number
Art. Nr. Article number
M. Nr. Part number
IBN Commissioning date
20 M. Nr. 05640910