Miele TOUCHTRONIC T 1413 Parts list manual

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Super Capacity Vented Dryer
T1413, T1415 SS
2"
23 1/2"
33 3/8" - 34 1/8"
26 1/2"
3 3/4" - 4 1/2"
25 1/2"
V
Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to
connect two Miele machines without rewiring.
E -
V-
5 foot - 208-240 Volt - 15 Amp 4-wire
(2 live / neutral / ground) molded plug
power supply connects upper right
rear (NEMA 14-30 Configuration).
Venting location may be adjusted to
lower left side or lower left rear (see
separate sheet).
Location Codes
E

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Cut-out Dimensions
Built-in Installations
Super Capacity Laundry Products
24"
28" min.
Water & Electrical
Connection
Location
C
32 3/8" - 35 1/4"
• Typically requires removal of unit's lid. Out of box unit height dimension without
lid is 32 5/16" - 32 11/16".
Notes
Location Codes
C - Cutout for Vent and Electric pass-
through. Adjust according to vent
location.

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
5 1/2"
4"
7 1/2"
Existing
208 / 240 Volt
30 Amp
Product Dimensions
Easy Installation Kits
057B / 060B
Notes
• Connect Washer and Dryer to Easy
Installation Kit
• All installations must be done in
accordnace with local codes
• 057B Kit fitted with a NEMA10-30 Plug
• 060B Kit fitted with a NEMA14-30 Plug

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Laundry Stand
WTS420 - White Only
26"
11"
Notes
• For use with both large and super
capacity washers or tumble dryers.
• All installations must be done in
accordnace with local codes
23 3/8"

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Stacked Washer & Dryer
Example Combination
W1213 + T1413
2"
D
W
E
3 3/4" - 4 1/2"
23 1/2"
26 1/2"
66 3/8" - 67 1/8"
V
Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to
connect two Miele machines without rewiring.
• Remove transport struts in rear of washing machine before installation.
D -
E -
W -
V-
5 foot flexible drain hose connects
upper left rear.
208-240 Volt - 15 Amp 5 foot 4-wire
(2 live / neutral / ground) molded plug
power supply connects upper right
rear.
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear.
Venting location may be adjusted to
lower left side or lower left rear (see
separate sheet).
Location Codes
E

Vent Locations
Super Capacity Vented Dryer
T1413, T1415 SS
Rear ViewLeft Side View Right Side View
4 3/4" 3 7/8"
3 1/2" - 4 1/4"
3 1/2" - 4 1/4"
Vent Locations
Vent Duct Calculations
Maximum Duct Lengths
4" diameter 65 feet
4 3/16" diameter 98 feet
4 3/4" diameter 140 feet
5" diameter 196 feet
Type of Bend or duct Effective Radius Subtract
Flexible duct 90° 4 - 12 inches 1 3/4 feet
Flexible duct 90° 12 - 20 inches 1 1/4 feet
Flexible duct 45° 4 - 20 inches 1 1/4 feet
Smooth duct 90° or 45° 4 - 8 inches 1 1/4 feet
Elbow 90° Sharp bend 8 1/4 feet
Concertina bend 8 inch 2 3/4 feet
Segmented bend 8 inch 2 feet
Louvered wall or window vent (#03780400) 12 1/2 feet
Wall vent kit with flap (#00087184) 5 feet
Window vent kit with flap (#00087185) 5 feet
Exhaust connection - left 20 feet
Exhaust connection - right 33 feet
Flat duct (#01221330) 59 feet
DO NOT use vinyl ducting
with Miele appliances.
Corresponding Dryer Height with NO lid: 32 1/8" - 32 7/8"
Corresponding Dryer Height with lid: 33 3/8" - 34 1/8"
4 3/4"
3 1/2" - 4 1/4"