Miele H 6560 BP User manual

Installation Instructions
H 6560 BP, H 6660 BP HQ&$



,QVWDOODWLRQUHSDLUDQGPDLQWHQDQFHZRUNVKRXOGEHSHUIRUPHGE\
D0LHOHDXWKRUL]HGVHUYLFHWHFKQLFLDQLQDFFRUGDQFHZLWKQDWLRQDO
DQGORFDOVDIHW\UHJXODWLRQVDQGWKHSURYLGHGLQVWDOODWLRQLQVWUXFWLRQV

Caring for the environment
97
Disposal of the packing
material
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Disposal of your old appliance
Old electrical and electronic appliances
often still contain valuable materials.
However, they also contain harmful
substances that were essential for the
proper functioning and safe use of the
equipment. Handling these materials
improperly or disposing of them in your
household waste can be harmful to
your health and the environment.
Therefore, please do not dispose of
your old appliance with regular
household waste.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Please be sure that your old appliance
does not pose a danger to children
while being stored for disposal.

Electrical connection
98
ɘCAUTION:
Before servicing, disconnect the
power supply by either removing the
fuse, shutting off the power main or
manually "tripping" the circuit
breaker.
Installation, repair and maintenance
work must be performed by a Miele
authorized service technician. Work
by unqualified persons could be
dangerous and may void the
warranty.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please leave these
instructions with the consumer.
Electrical connection
The oven is equipped with a power
cord approx. 7' 2" (2.2 m) in length with
a NEMA 14-30 P plug ready for
connection to the power supply:
– 120/208 V, 20 A, 60 Hz
or
– 120/240 V, 20 A, 60 Hz
The voltage can be adjusted (see
"Settings - Electrical Version").
SAVE THESE INSTRUCTIONS FOR
THE ELECTRICAL INSPECTOR'S
USE.

Installation diagrams
99
Appliance and cut-out dimensions
Miele ovens can be installed flush or proud. Discuss your installation
requirements with your architect, designer and installer.
Undercounter installation
BB

PP 
PP
PP

PP

PP

PP
AA


PP

PP

PP

PP

PP

PP

PP
ǞCut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
ǟPower cord with plug
*Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.

Installation diagrams
100
Installation into a tall cabinet
BB

PP 
PP
PP

PP

PP

PP


PP

PP
AA

PP

PP

PP

PP

PP
ǞCut-out (4" x 22" / 100 mm x 560 mm) in the bottom of the cabinet for power
cord and ventilation
ǟPower cord with plug
*Oven with glass front
** Oven with metal front
Front design may vary depending on model. For the more current specifications
please visit the Miele website.

Installation diagrams
101
Front dimensions
- 1/16"
(-2 mm)
B
22 5/8"
(575 mm)
A
4 3/8" (111 mm)
3/16"
(4 mm)
18 5/8"
(473 mm)
23 5/16"
(592 mm)
23 7/16"
(596 mm)
AH65xx: 2 11/16" (69 mm)
BOven with glass front: 1/16" (2.2 mm)
Oven with metal front: 1/16" (1.2 mm)

Installing the oven
102
ɘThe oven must not be operated
until it has been properly installed
within cabinetry.
The oven must have an adequate
supply of cool air for proper
operation. The required air must not
be heated excessively by other heat
sources, e.g. wood burning stove.
Observe the following when
installing:
Build into cabinetry with no back
wall.
Make sure that the shelf that the
appliance sits on does not touch the
wall.
Do not install insulation strops on the
side walls of the cabinet housing.
Before installation
ĺBefore connecting the oven to the
power supply, first disconnect the
power supply from the oven isolator
switch.
Mounting the door handle
(depending on model)
ĺMount the handle onto the retaining
bolts.
ĺUse the supplied Allen wrench to
tighten all four bolts.
Installing the oven
ĺConnect the power cord to the
electrical supply.
Do not carry the oven by the door
handle. The door can be damaged.
Use the handles on each side of the
oven to carry it.
It is recommended that you remove
the door before installing the
appliance (see "Cleaning and Care -
Removing the door") and all oven
accessories from the cavity. This will
make for easier installation into the
niche and will not tempt you to use
the handle to carry it.
ĺIf there are side handles, please
remove them.
ĺPush the oven into the cabinetry and
align it.
ĺOpen the door (if it was not removed
previously).

Installing the oven
103
ĺUse the supplied screws to secure
the oven to the side walls of the
cabinetry through the holes in the
trim.
ĺReinstall the door, if necessary (see
"Cleaning and care - Installing the
door").