Miffy MPC-002 User manual

MPC-002 Foldable keyboard user manual
□Introduction:
MPC-002 mini type Wireless connection keyboard with full-size alphanumeric keys, and the
keycap with middle low and high round structure brings you wonderful typing feeling. It is
compatible with IOS, Android, Windows system input device.
□ON/OFF operation:
The keyboard adopts sensitive induction switch. The keyboard will automatically wake up after
opening and shut down automatically after closing.
Keyboard opening-Power On
keyboard closing-Power Off

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement，the device can be
used in portable exposure condition without estriction

□Wireless connection pairing connection:
First, when the keyboard is opened, blue LED light will be lighted, Press FN+C key, the blue
LED light will flash, the keyboard will access in pairing.
Second, active “Wireless connection “function in the device which you are going to operate, and
find MPC-002, then press continue key to connect. If the connection successful, the blue LED
light will always be lighted.
□ LED light indication
1.Power indication LED light- When the keyboard switches on, the blue LED light will be turned
off after 3-second.
When keyboard is pairing, the blue LED light will flash.
The Red led light will flash in low energy, and the Red led light will be lighted in charging.
Red led Light will be turned off after full charging.
2.Caps Lock LED light- Press”CAPS lock” key to shift “Capital” and “Lowercase “.
□keyboard operation instruction:
1.When the keyboard and the operation device is in successful pairing. Please Press FN+Multimedia
key to confirm the corresponding system, otherwise some of the function keys will out of work.
□FN -function key instruction
FN key must combine the key with the same color to use ( The below figure for Android system
functions can match with Samsung tablets perfectly . for other brand tablets, there will be some
difference )
FN+按键图标
FN+ Multimedia
key
IOS
Android
Windows
Pairing
Ppairing
Pairing
IOS
-
-
-
Android
-
-
-
Windows
Home page
Home page
ESC
All selection
All selection
F1

Copy
Copy
F2
Cut
Cut
F3
Paste
Paste
F4
Search
Search
F5
Shift input
method
Shift input
method
F6
On/off soft
keyboard
On/off
soft keyboard
F7
Previous
Previous
F8
Play/Pause
Play/Pause
F9
Next
Next
F10
Volume down
Volume
down
F11
Volume up
Volume up
F12
delete
delete
delete
Lock
Lock
Lock
Page up
Page up
Page up
Page down
Page down
Page down
Beginning of
Line
Beginning of
Line
Beginning of
Line
End of Line
End of Line
End of Line
□Technical data:
Charger interface MICRO interface
Frequency parameter Blue tooth 4.2 standard Class2

Modulation type GFSK
Working voltage 3.3V-4.2V
Working current 1.3Ma-1.6Ma
Sleeping current 80Ua
Lithium Battery capacity 120Ma
Charing current <100Ma
Charing voltage 5V
Charing time <2hous
Stand-by time >120 Day
Uninterrupted working time 85Hours
Battery life 3-year
Key Strength 65g±10g
Key life 3million strokes
Operation distance <10 meters
Ambient temperature -10~+60DegC
Storage temperature -40~+65DegC
Key board unfolded Dimension 11.65"*3.72"*0.2"
□Energy-saving mode
Without any operation more than 10minutes, keyboard will access in sleeping mode automatically,
and the power indication light (Blue LED) will turn off. Press any key in 3-second, the keyboard
will wake up, and the blue Led light will be lighted.
□Battery Charging:
When the device lacks of power, Red Led light will be lighted. The device need battery charging.
First, Connect the one side of MICRO USB to keyboard, the other side to adaptor or computer.
Second, the Red LED light will be lighted in the charging process, and Red LED light turns off
after battery full charging.
□Security advice
Caution: Risk of electric shock, in fire and keyboard device damage due to incorrect operation.
1. Stay away from sharp objects
2. Do not put heavy objects on the keyboard
3. Do not heat it in the microwave
4. Do not press hardly or twist the keyboard
5. Stay away from oil, chemicals, or other dangerous liquids

6. Clean the keyboard case by water, alcohol or medical alcohol.
□FAQ
(A) If you cannot connect the Wireless connection keyboard to your device successfully or use
it smoothly, please try the following steps
1. Ensure the keyboard is within 10 meters of the effective working distance
2. Make sure the Wireless connection is paired. If not, re-pair it
3. If the Wireless connection keyboard repairing is unsuccessful, please delete the name of the
connected Wireless connection device and repair it
4. Please check the battery, if the battery lacks of power, please recharge it .
(B) The keyboard battery charging is not workable
1. Make sure the USB charging cable is properly connected to the keyboard and power supply.
2. Make sure the charger is connected to the power outlet