MikroTik MQS User manual

1
MQS
MQS
MQS
If you work with many PoE powered devices and manage their configuration and diagnostics, this small
device fits in your pocket will make your life so much easier! The MQS is a tool that lets you manage
MikroTik and other devices (including Ethernet-only!) from your smartphone over a Wi-Fi connection!
MQS can be powered from a power bank or a USB charger. It has PoE
out to power your devices – you don’t even need electricity
on-site to perform maintenance, diagnostics or Netinstall!
No more climbing and balancing towers with unwieldy laptops – just
carry an MQS in your pocket for safe and simple work anywhere!
Unplug the PoE cable from your CPE device, attach the MQS and it will
allow you to connect wirelessly and apply basic settings, working as a
Wi-Fi to Ethernet bridge with PoE output.
• Portable assistant for CPE install, bandwidth test
and configuration
• Power it with a USB power bank and it will power
your CPE over PoE, while you configure it
• Can also be used as a temporary travel AP
Mobile Quick Setup - system administrator’s best friend

2
MQS
MQS
12
43

3
MQS
MQS
Product code RBMQS
CPU ESP32, 160 MHz
Storage 2 MB flash
10/100M Ethernet ports 1
Wireless 2.4 GHz 802.11b/g/n
Antenna gain 1.5 dBi
Powering options MicroUSB 5 V (recommended power bank output >2.1 A), PoE
PoE in Passive PoE, 5 - 30 V
PoE out Passive PoE, 12 V 400 mA (when USB 5 V input is used)
Dimensions 40 x 65 x 21 mm
Operating temperature -20°C .. +70°C
Max power consumption 1 W
Specifications
Included parts
Mounting bracket Fastening strap USB cable Mounting kit
(K-33)
Plastic strap