Miller Electric Big 40 Diesel User manual

Processes
CC and CC/CV Models
Stick (SMAW)
TIG (GTAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
(Rated) 5/16 (7.9 mm) carbons
(Capable) 3/8 (9.5 mm) carbons
Stud Welding
CC/CV Model Only
MIG (GMAW)
Flux Cored (FCAW)
AC TIG (Deluxe Model)
Output Range
CC: DC Stick 55 – 500 A DC/TIG 55 – 500 A
CC/CV: DC Stick 40 – 550 A DC/TIG 20 – 350 A
AC TIG 15 – 375 A MIG/FCAW 14 – 40 V
Generator Output Rated at 104˚F (40˚C)
5500 Watts Peak — 4000 Watts Continuous
15,000 Watts 3-Phase / 12,000 Watts 1-Phase
(Deluxe Model)
Heavy Industrial
Applications
Petro Chemical Piping
Structural Steel Work
Maintenance and Repair
Quick
Specs
Big 40®Diesel Diesel Engine-Driven
Welder/Generator
Issued April 2008 • Index No. ED/8.5
Simplified control panel provides
easy set-up with fewer controls—
less training is required.
Standard GFCI receptacle required
on most job sites to protect
operators from electrical hazards.
CSA, IEC, and NEMA compliant for
welders. Degree of protection
provided by enclosure IP23.
Hot Start™provides positive Stick electrode
starts to make it easy to start all types of
electrodes, and works great for bead tie-ins.
Automatic idle saves fuel and prolongs
engine life along with reducing the
sound level.
Arc-Drive makes welding easy.
Automatically enhances Stick
welding, especially on pipe, by
focusing the arc and preventing
the electrode from going out.
The Power of Blue® .
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: [phone]
USA FAX: [phone]
Canadian FAX: [phone]
International FAX: [phone]
CATERPILLAR industrial engine designed
to operate over 10,000 hours before the
first basic overhaul. Backed by worldwide
CAT support and service.
Silenced — only 65 dB (90 Lwa) at idle.
73.8 dB at 23 ft (98.7 Lwa) maximum
output. Improves work site communications.
Enclosed base and case protects
internal components from corrosive
environments and reduces sound levels.
Welder/generator is warranted for 3 years, parts and labor.
The CATERPILLAR engine is warranted for 2 years by CATERPILLAR.
Quick and easy maintenance with
single-side access to oil level check,
oil fill, oil filter, fuel filter and air cleaner.
Remote toolless oil drain that allows oil to
be drained without getting under the engine
and reduces the chance of oil spillage.
AC TIG weld aluminum with deluxe model.
The most AC weld output on any engine
drive. (High-frequency unit required.)
More welding amperage!
400 amps at 100% Duty Cycle
450 amps at 60% Duty Cycle
500 amps at 40% Duty Cycle
Engine gauges indicate engine oil
pressure, and coolant temperature
(standard on all models).
CC/CV Models: The Vault — ultimate
control board reliability. See page 4.
NEW! Meter maintenance displays.
• Hour meter function
• Oil change interval
• High coolant temperature and
low oil pressure shutdowns
• Low fuel shutdown — engine
shuts downs before system runs
out of fuel, making restarts easy.
Accu-Rated
™
– Not Inflated
Generator Power
Improved!
Maintenance Displays!

2
Big 40®Diesel CC Control Panel
Welding
Mode
CC/DC
Big 40®Diesel CC Specifications (Subject to change without notice.)
Max. Open-
Circuit Voltage
95
Weld Output
Range
55 – 500 A
Weld Output Rated
at 104˚F (40˚C)
400 A at 36 VDC (14.4 kW),
100% Duty Cycle
450 A at 38 VDC (17.1 kW),
60% Duty Cycle
500 A at 30 VDC (15 kW),
40% Duty Cycle
Generator Output Rated
at 104˚F (40˚C)
Peak: 5500 watts
Continuous: 4000 watts,
34/17 A, 120/ 240 VAC, 60 Hz
while welding
Net Weight
(without fuel)**
1540 lb (697 kg)
Dimensions*
H: 43 in (1092 mm)
W: 28-1/2 in (724 mm)
D: 64-7/16 in (1637 mm)
NEMA EWI (ANSI C87.1) Class (1) output ratings. *Additional 7 in (178 mm) to top of exhaust. **Additional 190 lb (86 kg) when fuel tank is full.
Big 40®Diesel CC Performance Data
100
80
60
40
20
00 100 200 300 400 500 600 700 800 900 1000
DC AMPERES
DC VOLTS
Ranges
170 – 365
230 – Max
110 – 225
55 – 85
70 – 130
0.00
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
0 50 100 150 200 250 300 350 400
DC WELD AMPERES
AT 100% DUTY CYCLE
US Gal./Hr.
0.00
0.95
1.89
2.84
3.79
4.73
5.68
6.62
7.57
US Liters/Hr.
IDLE
CC/DC VOLT/AMP CURVES FUEL CONSUMPTION CURVE
4 kW 5.5 kW
302520151050
6050403020100
AC AMPERES IN 240 V MODE
AC AMPERES IN 120 V MODE
50
0
100
150
200
250
300
AC VOLTS
0
25
50
75
100
150
125
GENERATOR POWER CURVE
Engine
Brand
CATERPILLAR
Tier III,
C2.2 Diesel
HP
32.6
Type
Four-cylinder,
industrial,
liquid-cooled
diesel
Engine
Speeds
Run: 1850 RPM
Idle: 1250 RPM
Fuel
Capacity
25 gal
(95 L)
Coolant
Capacity
9 qt
(8.5 L)
Automatic Engine
Shutdown
Oil Pressure
Coolant Temperature
Oil
Capacity
9 qt
(8.5 L)
Features
Tier III, EPA-certified, indirect-injected,
liquid-cooled diesel engine. Right-side
service access with service intervals of
500 hours for oil and filters.
Engine Specifications (Subject to change without notice.)
9
10
12
11
13
14
15
4
6
3
1
2
5
7
8
Additional Features
Proven, rugged rheostat control technology
that has been in Miller engine drives for
over 60 years. Contains no printed control
boards.
Provisions are provided to plug a
RHC3GD34A remote control that will allow
precise adjustment of amperage without
walking back to the machine.
1. DC Ammeter*
2. DC Voltmeter*
3. Amperage Adjust Control
4. Amperage Range Switch
5. Amperage Adjust Switch and
Remote Amperage Adjust Receptacle
6. Stick/TIG Selector Switch
7. 120 VAC, 20 A GFCI Duplex Receptacle
8. 240 VAC, 30 A TwistLock Receptacle
(NEMA L6-30)
9. Fuel Gauge/Hour Meter/Oil Change Interval/
Engine Shutdown Indicator
10. Engine Oil Pressure Gauge
11. Battery Voltmeter*
12. Engine Coolant Temperature Gauge
13. Engine Control Switch
14. Starting Aid Switch
15. Polarity Switch*
*Optional on select models.

3
Big 40®Diesel CC/CV Control Panel
W elding
Mode
CC/DC
CV/DC
CC/AC
(Deluxe
Model)
Big 40®Diesel CC/CV Specifications (Subject to change without notice.)
Max. Open-
Circuit Voltage
95
56
65
W eld Output
Range
20 – 550 A
14 – 40 V
15 – 375 A
Weld Output Rated
at 104˚F (40˚C)
400 A at 36 VDC (14.4 kW),
100% Duty Cycle
450 A at 38 VDC (17.1 kW),
60% Duty Cycle
500 A at 34 VDC (17 kw),
40% Duty Cycle
300 A at 32 VAC (9.6 kW),
100% Duty Cycle
335 A at 33 V (11.1 kW),
60% Duty Cycle
375 A at 35 V (13.1 kW),
40% Duty Cycle
Generator Power Output Rated
Peak: 5000 watts
Continuous: 4000 watts, 34/17 A,
120/240 VAC, 60 Hz while welding
Deluxe Model Additional Power Plant:
1-phase, 12 kW, 50 A, 120/240 VAC, 60 Hz; or
3-phase, 15 kW, 36 A, 240 VAC, 60 Hz while
not welding
Net Weight
(without fuel)**
1545 lb
(701 kg)
Dimensions*
H: 43 in
(1092 mm)
W: 28-1/2 in
(724 mm)
D: 64-7/16 in
(1637 mm)
NEMA EWI (ANSI C87.1) Class (1) output ratings. *Additional 7 in (178 mm) to top of exhaust. **Additional 190 lb (86 kg) when fuel tank is full.
Additional Features
A multi-colored process selector control
allows quick and easy process changes
without having to use multiple switches.
Heavy-Duty Design — The Vault design
provides enhanced arc characteristics that
include more dig in the Stick mode with
smoother and lower amperage in the TIG
mode. Along with the superior welding
performance, the Vault provides the ultimate
reliability in the harshest of environments.
A hermetically-sealed vault protects Miller
control boards from dust, moisture, and
tough environmental elements. Extreme
conditions will not cause the output to
change, eliminating the need to periodically
turn up the heat.
15,000 watt generator option for stand-by
power generation adds 15 kW, three-phase,
240 volt power to CC/CV units. 12 kW,
120/240 volt, single-phase power from a
50 amp receptacle while not welding.
Big 40®Diesel CC/CV Performance Data
DC VOLTS
DC AMPERES
100
80
60
40
20
0
0 100 200 300 400 500 600 700 800 900 1000
Ranges
155 – 450
Max
115 – 320
40 – 90
75 – 195
0 100 200 300 400 500
Ranges
35 – 250
60 – 365
25 – 155
15 – 75
DC AMPERES
20
0
40
60
80
100
DC VOLTS
0
20
40
60
80
100
0 50 100 150 200 250 300 350 400 450 500
Ranges
55 – 350
35 – 205
25 – 105
15 – 45
AC AMPERES
AC VOLTS
CC/CV VOLT/AMP CURVES
STICK MODE
CC/CV VOLT/AMP CURVES
TIG MODE
CC/CV VOLT/AMP CURVES
AC TIG MODE
DC VOLTS
DC AMPERES
100
80
60
40
20
0
0 100 200 300 400 500 600 700 800 9001000
MAX
MIN
CC/CV VOLT/AMP CURVES
MIG MODE
4
5
9
10
12
11
13
15
16
17
18
14
6
7
8
3
1
2
19
5
Process/Contactor Selector Switch
1. DC Ammeter*
2. DC Voltmeter*
3. Amperage/Voltage Adjust Control
4. Ampere Range Switch
5. Amperage/Voltage Adjust Switch and Remote
Amperage/Voltage Adjust Receptacle
6. Process/Contactor Selector Switch
7. 120 VAC, 20 A GFCI Duplex Receptacle
8. 240 VAC, 30A TwistLock Receptacle
(NEMA L6-30)
9. Fuel Gauge/Hour Meter/Oil Change Interval/
Engine Shutdown Indicator
10. Engine Oil Pressure Gauge
11. Battery Voltmeter*
12. Engine Coolant Temperature Gauge
13. Engine Control Switch
14. Starting Aid Switch
15. 3-Phase Power Generator Option*
16. Strain Relief*
17. 50 A, 3-Phase Circuit Breaker
18. 50 A, 120/240 V Receptacle
(NEMA 14-50)*
19. AC/DC Polarity Switch*
*Optional on select models.

4
Big 40®Diesel CC Options
Weld Ammeter and Voltmeter Kit
#195 131 Field
Panel-mounted analog meters monitor
welding output.
Installation time: 35 minutes
Cold Weather Starting Aid Kit
#195 056 Field
Includes 120 V block heater.
Note: All models come standard with glow plugs.
Battery Voltage Gauge
#195 454 Field
Monitors battery charging circuit.
DC Polarity Reversing Switch Kit
#043 942 Field
Changes DC polarity without the use of tools.
Installation time: 35 minutes
Big 40®Diesel CC/CV Options
Weld Ammeter and Voltmeter Kit
#195 131 Field
Panel-mounted analog meters monitor
welding output.
Deluxe model comes
standard with weld meters.
Installation time: 35 minutes
AC/DC Polarity Reversing Switch Kit
#195 095 Field
Changes DC+/AC/DC- without the use
of tools.
Deluxe model comes standard
with AC/DC polarity switch.
Installation time: 35 minutes
Battery Voltmeter
#195 454 Field
Monitors battery charging circuit.
Cold Weather Starting Aid Kit
#195 056 Field
Includes 120 V block heater.
Note: All models come standard with glow plugs.
15,000 Watt Generator Plant
12,000 Watts, 1-phase, 120/240 V
15,000 Watts, 3-phase, 240 V
The panel is protected by a 50 amp
on/off circuit breaker. It includes a 50 A,
1-phase receptacle and strain relief for
direct hard-wiring. This power is only
available while NOT welding.
Comes
standard with deluxe model.
Note: Available as factory option.
See Ordering Information on back page.
5
The Vault
Superior Circuit Board Design
Miller’s critical circuit boards are engineered
to carry low power and low heat to reduce
thermal stress and minimize expansion and
contraction. In contrast, our competitor’s
boards carry
high power and high heat , making
them more vulnerable to failure.
“The Vault” Makes Upgrading to Miller CC/CV
Units Worry-Free
Concerns with circuit board reliability have
resulted in some operators steering clear of
CC/CV welder/generators — even though they
offer a superior arc and multiple welding
processes. Miller’s circuit board reliability isn’t
a concern since all PRO 300 and Big Blue
multiprocess industrial engine drives feature
the Vault.
Created out of two aluminum halves sealed
with silicone, as well as watertight harness
connections, the Vault provides a clean circuit
board environment, protecting the electronics
— and controlling output — in heavy industrial
applications. No other competitor protects their
electronics with a sealed vault, leaving critical
circuit boards exposed to harsh elements that
can disrupt the machine’s electronics, and
therefore, its operation.

Genuine Miller Accessories (Continued)
FA-1D Lockable Flame Arrestor
Fuel Cap #043 947 Field
Fuel cap can be padlocked to
prevent vandalism. A built-in
flame arrestor prevents flames or
sparks from entering the fuel tank.
Spark Arrestor
Muffler Kit
#195 012 Field
Prevents particles
from leaving the muffler that could
potentially start a fire. Mandatory when
operating on California grasslands, brush,
or forest-covered land, and in all National
Forests. For other areas, check your state
and local laws. Meets US Forest Service
standard 5100-1B.
Vandalism Lockout Kit
#195 118 Field
Lockable hinged steel
panels cover and protect
name plate gauges and
ignition switch (padlock
included). Also includes
engine compartment door
lock and key.
Cable Holder #043 946
Saddle-bag-style cable
holder. Convenient wrap-
around storage of coiled
cable for transportation.
Stores 100 ft of 2/0 cable
on each side.
Note: For best results do not weld when cable is coiled!
Canvas cover cannot be used with cable holder.
Roll Cage/Drip Pan
#194 918 Field
Heavy-duty galvanized
steel structure
designed to protect the
machine. The roll cage
meets offshore oil
platform requirements with a drip pan and
drain plug along with a heavy-duty lift eye.
Canvas Cover (Blue)
#194 683 Field
Attractive, waterproof
canvas cover resists
stains and mildew,
and protects the
finish of your welder.
Note: Canvas cover cannot be used with cable holder.
Stick (SMAW) Welding
Weld Leads
#173 851 2/0, 350 A, 100% duty cycle,
50 ft stinger, 50 ft work cable
#043 952 2/0, 300 A, 100% duty cycle,
100 ft stinger, 50 ft work cable
Plasma Cutting
Spectrum®375 X-TREME™#907 303
Spectrum®375 X-TREME™with X-CASE™
#907 339 (not shown)
See Lit. Index No. PC/9.2.
Spectrum®625 #907 058
See Lit. Index No. PC/9.5.
Spectrum 2050 #903 777-01-2
See Lit. Index No. PC/7.0.
MIG (GMAW) or Flux Cored (FCAW)
Millermatic®
Passport®Plus
#907 401
Portable, all-in-one
MIG package
features ultimate
arc performance,
self-contained gas
bottle, and flexibility to plug into 115 or 230
V power with Miller exclusive Multi-Voltage
Plug. See Lit. Index No. DC/12.53.
SuitCase™X-TREME™8VS Wire Feeder
#300 093
SuitCase™X-TREME™12VS Wire Feeder
#195 500
Lightweight, voltage-sensing wire feeders
include secondary contactor and gas valve.
Require drive roll kit. See Lit. Index No.
M/6.41.
SuitCase™8RC Wire Feeder #194 938
SuitCase™12RC Wire Feeder #194 940
Lightweight and flexible enough to run a
variety of wires up to .062 in diameter.
Comes standard with remote voltage
control. See Lit. Index No. M/6.5.
MIG (GMAW)/Flux Cored (FCAW) Guns
Miller produces a complete line of
dependable MIG guns. See Lit. Index Nos.
AY/15.0, AY/16.0 and AY/17.0.
Spoolmatic®30A
Spool Gun
#130 831
Air-cooled, 200-amp,
1-lb spool gun for
aluminum MIG. See Lit. Index No. M/1.73.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR™Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
TIG (GTAW) Welding
Dynasty®200 Series
For premium portable
AC/DC TIG arc quality.
See Lit. Index No.
AD/4.8.
HF-251 Series
#042 388
HF-251D-1, 115 VAC
#042 387
HF-251D-2, 230 VAC
High-frequency arc
starter and stabilizer.
See Accessory Lit. Index No. AY/5.0.
5

6
4 West Four-Wheel Steerable
Off-Road Trailer #042 801
A heavy-duty 2570 lb (1166 kg) capacity trailer
designed for use in mines, quarries, and other
rough terrain. Has narrow 22 ft (6.7 m) turning
radius. Includes 3 in lunette eye, universal hitch
and safety chains.
Note: Trailer is shipped unassembled.
HWY-224 Trailer #043 805 For highway use.
OFR-224 Trailer #043 802 For off-road use.
A 2650 lb (1202 kg) capacity trailer. Welded
steel tubing frame, heavy-duty axle with roller
bearing hubs and leaf-spring suspension.
Includes jack stand, 2 in (50 mm) ball hitch.
HWY-224 also includes fenders and lights.
Note: Trailer is shipped unassembled.
Cable Tree #043 826
Provides an area to conveniently wrap weld
cables and extension cords.
Lunette Eye 2-1/2 in (64 mm) #043 824
HWY-430 Tandem Axle Trailer #043 806
Smooth riding with 3750 lb (1701 kg) capacity.
Includes hand-operated parking brake, hydraulic
brake system, and a break-away device to lock
brakes if the trailer comes loose. Includes jack
stand, fenders and lights. (Hitch must be
ordered separately.)
Note: Some assembly required.
Cable Tree #043 826
Provides an area to conveniently wrap weld
cables and extension cords.
Ball Hitch 2 in (50 mm) #043 864
Lunette Eye 3 in (76 mm) #043 863
Trailers and Hitches (For both models.)
Trailer Specifications (Subject to change without notice.)
Net
Payload
2570 lb
(1166 kg)
2650 lb
(1202 kg)
3750 lb
(1701 kg)
Gross Vehicle
Weight Rating
3000 lb
(1361 kg)
2960 lb
(1343 kg)
4280 lb
(1941 kg)
Gross Axle
Weight Rating
2000 lb/axle
(907 kg/axle)
3500 lb
(1588 kg)
2200 lb/axle
(998 kg/axle)
Model
4 West
HWY-224
OFR-224
HWY-430
Height
of Bed
21-1/4 in
(540 mm)
18-1/2 in
(470 mm)
19-1/4 in
(489 mm)
Road
Clearance
8 in
(203 mm)
7-1/2 in
(191 mm)
8-1/2 in
(216 mm)
Net
Weight
430 lb
(195 kg)
355 lb
(161 kg)
530 lb
(240 kg)
Track (Center
to center of
tires)
55-1/4 in
(1403 mm)
52 in
(1321 mm)
52 in
(1321 mm)
Standard Tires
(Standard rating
or P-size rating)
B78-13
B78-13B
B78-13B
Dimensions
Length: 91 in (2311 mm)**
Width: 61-1/4 in (1556 mm)
Length: 122-1/2 in (3112 mm)
Width: HWY – 61 in (1549 mm)*
OFR– 58-1/2 in (1486 mm)
Length: 156-1/2 in (3975 mm)
Width: 61 in (1549 mm)*
* Width at outside of fenders. ** Does not include tongue.
Genuine Miller Accessories (Continued)
Remote Controls (CC models only)
RHC-3GD34A Remote
Hand Control #041 122
Allows for precise
adjustment of amperage.
Includes 20 ft (6 m) cord.
Remote Controls (CC/CV models)
RHC-14 Hand Control
#129 340
Miniature hand control for
remote current and contactor
control. Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes 20 ft
(6 m) cord and 14-pin plug.
RFCS-14 HD Foot
Control #194 744
Foot current and
contactor control.
20 ft (6 m) cord and
14-pin plug.
RMLS-14
#129 337
Fingertip
momentary- and maintained-contact rocker
switch for contactor control. Push forward
for maintained contact and back for
momentary contact. Includes 20 ft (6 m)
cord and 14-pin plug.
RCC-14 Remote
Contactor and
Current Control
#151 086
14-pin plug. Rotary-motion fingertip control
fastens to TIG torch using two Velcro®straps.
Includes 28 ft (8.5 m) control cord.
RCCS-14 Remote
Contactor and
Current Control
#043 688
Up-and-down rotary-motion fingertip control
fastens to TIG torch using two Velcro®
straps. Includes 28 ft (8.5 m) control cord.
Extension Cords for 14-Pin Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.9 m)

7
MIG Gun
Work
SuitCase
8RC/12RC
Work
Stick Electrode
Work
Flux Cored Gun
Aluminum MIG with
Spoolmatic 30A Gun
Work
Cutting Torch
W
o
rk
Spectrum
14-Pin
14-Pin WC-24
TIG
Torch
Work
14-Pin
HF-251D-1
X-TREME 8VS/
X-TREME 12VS
Feeder
Plasma Basic Equipment
Spectrum®375 X-TREME™#907 303
Spectrum®375 X-TREME™with X-CASE™
#907 339
Spectrum®625 #907 058
Spectrum®2050 #903 777-01-2
Stick (SMAW) Basic Equipment
Flux-Cored (FCAW) Basic Equipment
SuitCase™X-TREME™ 8VS #300 093
SuitCase™X-TREME™12VS #195 500
MIG (GMAW) Basic Equipment
SuitCase™8RC #194 938
SuitCase™12RC #194 940
Aluminum MIG (GMAW) Basic Equipment
Spoolmatic®30A #130 831
WC-24 #137 549
TIG (GTAW) Basic Equipment
Dynasty®200 Series
HF-251D-1 #042 388*
*TIG power cable adapter required
Typical Installations

Litho in USA
Distributed by:
Power Source and Factory Options Stock No. Description Qty. Price
Big 40®Diesel CC #907 171 CSA model with engine gauges and automatic idle
Big 40®Diesel CC/CV #907 170 CSA model with engine gauges and automatic idle
#907 170-03-1 CSA Deluxe model w/ automatic idle, engine gauges, welding meters,
AC/DC polarity switch and high kW option
Field Kit Accessories
Weld Ammeter and Voltmeter Kit #195 131 Standard on deluxe model
Battery Voltmeter #195 454
DC Polarity Switch Kit #043 942 Changes DC polarity positive to negative
AC/DC Polarity Switch Kit #195 095 For CC/CV models. Standard on deluxe model
Cold Weather Starting Aid Kit #195 056 120 V block heater
Lockable Fuel Cap Flame Arrestor Kit #043 947 Padlock not included
Spark Arrestor Muffler Kit #195 012 Horizontal externally mounted
Vandalism Lockout Kit #195 118 Lockable front control panel and engine compartment
Cable Holder #043 946 Saddle-bag-style. Fastens to machine
Roll Cage/Drip Pan #194 918
Canvas Cover #194 683 Field. Cannot be used with cable holder
Stick Accessories
Accessory Kits #173 851 2/0, 350 A, 100% duty cycle, 50 ft (15 m) stinger, 50 ft (15 m) work clamp
#043 952 2/0, 300 A, 100% duty cycle, 100 ft (30.5 m) stinger, 50 ft (15 m) work clamp
MIG/Flux Cored Accessories
Millermatic®Passport®Plus #907 401 Includes gas bottle and MVP. See Lit. Index No. DC/12.53
SuitCase™X-TREME™8VS #300 093 See Lit Index No. M/6.41
SuitCase™X-TREME™12VS #195 500 See Lit Index No. M/6.41
SuitCase™8RC #194 938 See Lit Index No. M/6.5
SuitCase™12RC #194 940 See Lit Index No. M/6.5
MIG (GMAW)/Flux Cored (FCAW) Guns See Lit Index Nos. AY/15.0, AY/16.0 and AY/17.0
Spoolmatic®30A Spool Gun #130 831 Requires WC-24 Control. See Lit. Index No. M/1.73
WC-24 Control #137 549 See Lit. Index No. M/1.5
XR™Wire Feeder Control and Guns See Lit. Index No. M/1.7, M/1.71, and M/1.73
TIG Accessories
Dynasty®200 Series See Lit Index No. AY/4.8
High Frequency Arc Starters See Lit. Index No. AY/5.0
Remote Controls
RHC-3GD34A #041 122 CC models only, hand control
RHC-14 #129 340 CC/CV models only, amperage or voltage control
RFCS-14 HD #194 744 CC/CV models only, foot control
RMLS-14 #129 337 CC/CV models only, momentary and maintained contact switch
RCC-14 #151 086 CC/CV models only, fingertip control
RCCS-14 #043 688 CC/CV models only, fingertip control
Remote Control Extension Cords See page 6
Trailers and Hitches
4-West Trailer #042 801 4-wheel steerable implement trailer
HWY-224 Trailer #043 805 Trailer with lights, fenders and 2 in ball hitch
OFR-224 Trailer #043 802 Trailer with 2 in ball hitch
Lunette Eye, 2-1/2 in #043 824 Replaces the 2 in ball hitch on the HWY-224 or OFR-224
Cable Tree #043 826 Trailer mounted cable holder for HWY-224, OFR-224 or HWY-430
HWY-430 Trailer #043 806 Hitch required
Ball Hitch, 2 in #043 864 For HWY-430 only
Lunette Eye, 3 in #043 863 For HWY-430 only
Date: Total Quoted Price:
Ordering Information