Miller Electric XMT 350 CC/CV User manual

XMT®350 Series Multiprocess Welding
Power Source
Issued October 2007 • Index No. DC/18.83
Lightweight, aerospace-grade aluminum case
offers protection with the benefit of reduced weight.
Auto-Line™Power Management
Technology allows for any input voltage
hook-up (208 – 575 V) with no manual
linking required, providing convenience
in any job setting. Ideal solution for dirty
or unreliable input power.
Lift-Arc™allows TIG starting without the use of
high-frequency. Starts the arc without contaminating
the weld with tungsten.
Adaptive Hot Start™increases the output amperage
at the start of a weld if necessary, eliminating
electrode sticking.
Inverter arc control technology provides greater
puddle control for superior 6010 Stick electrode
performance, and outstanding MIG weld performance.
Fan-On-Demand™cooling system operates only
when needed, reducing noise, energy use and the
amount of contaminants pulled through machine.
The Power of Blue® .
Wind Tunnel Technology™protects electrical
components and PC boards from contamination.
Processes
MIG (GMAW)/Pulsed MIG (GMAW-P)*
Stick (SMAW)
TIG (GTAW)
Flux Cored (FCAW)
Air Carbon Arc Cutting and Gouging (CAC-A)
*XMT-350 MPa; XMT 350 CC/CV with
required optional control; not available with
XMT 350 VS model.
Input Power Requires 3- or 1-Phase Power,
208 – 575 VAC, 50/60 Hz
Rated Output 10 – 38 V, 5 – 425 A
Weight Net: 80 lb (36.3 kg)
Ship: 89.1 lb (40.4 kg)
Heavy Industrial Applications
Construction
Shipbuilding
Railroad
Truck/Trailer Manufacturing
Fabrication
Repair Shops
Rental Fleets
Power Generation Plants
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: [phone]
USA FAX: [phone]
Canadian FAX: [phone]
International FAX: [phone]
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Quick
Specs
XMT 350 CC/CV XMT 350 MPa with
Built-In Pulse MIG
(see page 4)
XMT 350 VS
Line voltage compensation keeps welding output
constant even if input power varies by +/-10%.
XMT 350 models further expand line voltage
compensation on 460 VAC to an amazing +37%, -59%.
Process selector switch reduces the number of
control setup combinations without reducing
any features.
Large, dual digital meters are easy to view and are
presettable to ease setting weld output.
The XMT 350 Series is packed with
features to meet the most demanding
welding needs.
Please see page 2 to determine which
model is right for your application.

2
Certified to both the Canadian and U.S. Standards for welding equipment.
DUTY CYCLE CHART
DUTY CYCLE
30
WELDING AMPERES
200
150
100
10 15 20 25
500
400
300
10040 50 60 70 9080
425
350
250
3-PHASE OPERATION
1-PHASE OPERATION
6 AWG POWER CORD
8 AWG POWER CORD
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500
AMPS
VOLTAGE
GTAW
MIN
SMAW
80A ARC
CONTROL
50%
75%
100%
25%
0%
SMAW
MAX
GTAW
MAX
CC VOLT/AMP CURVE
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500
AMPS
VOLTAGE
MAX
MIN
CV VOLT/AMP CURVE
XMT®350 Performance Data
Input
Power
Three-
Phase
Single-
Phase
Rated Output
at 60%
Duty Cycle
350 A at
34 VDC
300 A at
32 VDC
Amperage
Range in
CC Mode
5–425 A
5–425 A
Voltage
Range in
CV Mode
10–38 V
10–38 V
Max. Open-
Circuit
Voltage
75 VDC
75 VDC
Amps Input at Rated Load Output, 60 Hz,
208 V 230 V 400 V 460 V 575 V KVA KW
40.4 36.1 20.6 17.8 14.1 14.2 13.6
60.8 54.6 29.7 24.5 19.9 11.7 11.2
Weight
80 lb
(36.3 kg)
Dimensions
H: 17 in (432 mm)
W: 12-1/2 in (318 mm)
D: 24 in (610 mm)
Amperage
Class*
300 A
350 A
565 A
Power
Processing
Auto-Link®
Auto-Line™
Manual
Remote
Capability
Yes
Yes
Yes
No
Yes
Industrial Inverters
XMT 304 CC/CV, 230/460 VAC
XMT 350 MPa, 208 – 575 VAC
XMT 350 CC/CV, 208 – 575 VAC
XMT 350 VS, 208 – 575 VAC
XMT 456 CC/CV, 230/460 VAC
Process
Capability
Stick,
DC TIG,
MIG,
CAC-A
Pulsed MIG Capability
Optima™Pulse Control Required
Built-In
Optima™Pulse Control Required
No
Optima™Pulse Control Required
Connectors
Dinse only
Dinse or Tweco
Dinse or Tweco
Tweco only
Ring Lug only
For more
Information
Lit. No. DC/18.8
Page 4
Page 3
Page 3
Lit. No. DC/18.8
Auxiliary
Power
Optional
Optional
Optional
No
Standard
XMT®350 Specifications (Subject to change without notice.)
Which XMT®is Right for You?
Additional Features
Exceptional electrical efficiency. At 400 A,
efficiency is 87.24%!
350 A of welding output at 60% duty cycle
with superior low-end performance.
Power factor of .95 enables smaller
fuses/breakers and primary wiring. Primary
amperage draw at rated output is 25% less
than the competition.
Ultra-tough, polycarbonate-blended cover
for control panel protects front controls
from damage.
Optional gas solenoid for TIG welding.
Which XMT 350
is right for you?
See XMT 350 CC/CV
(page 3)
YES
NO
YES
NO
See XMT 350 MPa
(page 4)
See XMT 350 VS
(page 3)
Need Pulsed MIG
(GMAW-P)
capability?
Most often Stick (SMAW)
or Flux Cored (FCAW) welding
with a voltage-sensing
feeder?
*60% Duty Cycle Rating

3
1. Voltmeter
2. Process Selector Switch (Rotary Switch)
3. Ammeter
4. Voltage/Amperage Adjustment Control
5. Arc Control
NOTE:
VS model is equipped with Tweco-style output connector.
1. Voltmeter
2. Remote Control Receptacle
3. Process Selector Switch (Rotary Switch)
4. Ammeter
5. Voltage/Amperage Adjustment Control
6. Arc Control
2
1
3
4
5
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
XMT®350 VS Control Panel
XMT®350 CC/CV Control Panel
Additional Features
Low OCV Stick — A built-in, selectable
feature, that reduces the Stick mode
open-circuit voltage (OCV) to nearly
15 volts when the welding power source is
not in use. Eliminates the need for add-on
voltage reducers.
Note: VS model is available only with
Tweco-style weld cable disconnects. Tweco
cable connectors are not supplied with the
unit and must be ordered separately.
Optional 115 VAC auxiliary power is not
available on VS model.
Pulsed MIG (GMAW-P) capability is not
available on VS model.
Additional Features
Auto Remote Sense™enables unit to
automatically use remote control if
connected to remote control receptacle.
Low OCV Stick — A built-in, selectable
feature, that reduces the Stick mode
open-circuit voltage (OCV) to nearly
15 volts when the welding power source is
not in use. Eliminates the need for add-on
voltage reducers.
Dinse International-style weld disconnects
provide high-quality weld cable connections.
Dinse and Tweco connectors are available.
When Dinse connectors are specified, two
connectors are supplied with the unit.
Optional 115 VAC auxiliary power provides
10 amps of circuit-breaker-protected power
for water circulators, etc.
Pulsed MIG (GMAW-P) capabilities with
optional Optima™control reduces spatter
and distortion, allows better out-of-position
puddle control, and provides potential
reduction of fume particle emission.
2
3
1
4
5
6
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
CC

4
1. Output ON Indicator Light
2. Left Display
3. Voltage Display
4. Arc Length Indicator
5. Remote Control Receptacle
6. Process Selector Switch (Rotary Switch)
7. Adjustment Control
8. Right Display
9. Setup Indicator
10. Amperage Indicator
11. Remote PC Interface
12. Setup Indicator Lights
• Arc Control Indicator
• Wire Type Indicator
• Gas Type Indicator
• Setup Button
5
6
2
3
4
1
8
9
10
7
11
12
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
CC
Setup
OUTPUT ON
SETUP
Arc Control
Wire Type
Gas Type
XMT®350 MPa Control Panel
MPa
SharpArc™
Additional Features
Auto Remote Sense™enables unit to
automatically use remote control if
connected to remote control receptacle.
Dinse International-style weld disconnects
provide high-quality weld cable connections.
Dinse and Tweco connectors are available.
When Dinse connectors are specified, two
connectors are supplied with the unit.
Optional 115 VAC auxiliary power provides
10 amps of circuit-breaker-protected power
for water circulators, etc.
SharpArc controls welding arc cone width
in Pulsed MIG (GMAW-P) welding mode.
If a gas is used other than what is listed
on the Pulsed MIG welding program
chart (below left), the SharpArc™can be
adjusted to help customize your arc to the
gas being used.
Lower SharpArc™settings widen the arc
cone, increase puddle fluidity and flattens
the weld bead.
MPa: M (MIG), P (Pulse), a (Advanced
Arc Control). Advanced arc control
enables an improved pulse welding arc.
The operator has more control over puddle
and bead characteristics using SharpArc™
.
In addition, the unit provides a more
robust and stable arc at very low arc
length, reducing heat input, and providing
the ability to weld on a wider range of
material thickness.
The XMT 350 MPa expands the process capability of an XMT 350 with built-in Pulse MIG operation.
See the table below for the wide range of Pulsed MIG (GMAW-P) welding applications the
XMT 350 MPa can handle.
The simple, powerful XMT 350 MPa can handle almost
any portable welding application.
(0 setting) (50 setting)
Low Setting High Setting
Steel
Metal Core
Stainless Steel
Aluminum
Nickel
Silicon Bronze
Copper Nickel
.035 STL
.045 STL
.035 MCOR
.045 MCOR
.052 MCOR
.035 SSTL
.045 SSTL
.035 AL4X (4000 Series)
3/64 AL4X (4000 Series)
.035 AL4X (5000 Series)
3/64 AL4X (5000 Series)
.035 NI
.045 NI
.035 SIBR
.045 CUNI
Gas Types
90% ARGN/10% CO2(Argon/Carbon Dioxide)
95% ARGN/5% OXY (Argon/Oxygen)
90% ARGN/10% CO2(Argon/Carbon Dioxide)
TRI MIX (Tri-gas mixture: 81% ARGN/18% HE/1% CO2
[Argon/Helium/Carbon Dioxide])
98% ARGN/2% OXY (Argon/Oxygen)
98% ARGN/2% CO2(Argon/Carbon Dioxide)
100% ARGN (Argon)
75% ARGN/25% HE (Argon/Helium)
100% ARGN (Argon)
75% HE/25% ARGN (Helium/Argon)
Built-In Pulsed MIG Programs
Wire Types

5
XMT®350 Wire Feeder Packages
XMT®350 CC/CV MIGRunner™#907 233
Comes Complete With:
XMT 350 CC/CV power source
22A wire feeder
Bernard®Q™-Gun
Consumables
.035/.045 in drive roll kit
Regulator/flow gauge with gas hose
MIGRunner Cart with cylinder rack
Bottom tray will hold optional Coolmate 3
(sold separately)
SuitCase™X-TREME™8VS
with XMT®350 VS and Bernard®
Q300 gun #951 096
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ steel
TIG Cable Control wire
No Yes No No 32 lb
SuitCase™X-TREME™12VS
with XMT®350 CC/CV and Bernard®
Q300 gun #951 099
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ steel
TIG Cable Control wire
No Yes No No 66 lb
SuitCase™8RC with XMT®350 MPa
and Bernard®Q300 gun #951 079
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ steel
TIG Cable Control wire
Yes Yes Yes Yes 32 lb
SuitCase™12RC with XMT®350 MPa
and Bernard®Q300 gun #951 078
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ steel
TIG Cable Control wire
Yes Yes Yes Yes 66 lb
SuitCase™X-TREME™8VS
with XMT®350 MPa and Bernard®
Q300 gun #951 081
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ steel
TIG Cable Control wire
Yes Yes No No 32 lb
SuitCase™X-TREME™12VS
with XMT®350 MPa and Bernard®
Q300 gun #951 080
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ steel
TIG Cable Control wire
Yes Yes No No 66 lb
XR-Control, XMT®350 MPa
and XR-Aluma-Pro™Gun #951 097
Pulse Stick Remote Feeder Weight
MIG MIG Control Remote w/ alum.
TIG Cable Control wire
Yes Yes Yes Yes 57 lb

Optima™#043 389
A multipurpose,
microprocessor-based
pulse control for both
synergic MIG (wire
welding or GMAW) or
manual MIG pulsing.
Use this control with the
XMT 304/350 CC/CV
power sources and any Miller wire feeder,
including automatic feeders and spool
guns. Includes a 25 ft (7.6 m) cord with
14-pin plug. (Not for use with XMT 350
MPa or VS models.)
Extension Cords for Optima
#043 725 25 ft (7.6 m)
#043 726 50 ft (15.2 m)
#043 727 75 ft (22.9 m)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin receptacles. For
use with Spoolmatic
30A spool gun.
WC-115A Weld Control
#137 546-01-1
Operates on 115 VAC
and is designed for
power sources without
a 14-pin receptacle. For
use with Spoolmatic 30A spool gun. Includes
10 ft (3 m) wall-type plug and power cord.
HF-251D-1
High-Frequency Arc
Starter and Stabilizer
#042 388
Portable 250 amp, 60%
duty cycle unit adds
high frequency to the
welding circuit to help start the arc when
using the DC TIG (GTAW) process.
Operates on 115 VAC, 50/50 Hz. See Lit.
Index No. AY/5.1.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity reversing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp receptacle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
Gas Solenoid Kit #195 286
Easy to install, optional gas solenoid kit for
TIG welding applications. Kit only works
with XMT 350.
RFCS-14 Foot Control
#043 554
Heavy-duty foot current
and contactor control.
Includes 20 ft (6 m)
cord and 14-pin plug.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RMLS-14
#129 337
14-pin plug
Momentary- and maintained-contact rocker
switch for contactor control. Push forward for
maintained contact and back for momentary
contact. Includes 20 ft (6 m) cord.
RCC-14 Remote Contactor and Current
Control #151 086
14-pin plug. Rotary-motion fingertip control
fastens to TIG torch using two Velcro®
straps. Includes 28 ft (8.5 m) control cord.
RCCS-14 Remote Contactor and Current
Control #043 688
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 28 ft
(8.5 m) control cord.
Extension Cords for Remote Controls
and 24 VAC Wire Feeders
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
14-pin plug to 14-pin socket.
Note: Not for use with Optima or 60M Series.
Inverter Racks
Four or Six-Arc Welding System
The Inverter Rack
conveniently houses
multiple XMT power
sources for multiple
welders. Both 4-pack
and 6-pack models
are available.
Features include:
Provision to parallel power sources or
common work connections
Two lifting eyes for transportation
Rugged skids for dragging or pushing
Customer can install up to a maximum
of 4 XMT 456 power sources
For detailed information on customized
Inverter Rack systems see Lit. Index No.
DC/18.81.
Running Gear
MIGRunner™Cart #195 445
MIGRunner™XL Cart #195 246
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles.
XMT Cylinder Cart
#042 537
Carries two 160 lb
(72.6 kg) gas
cylinders, or one gas
cylinder and one
coolant system for
TIG (GTAW) welding.
Feeder mounts to tray above power source.
Universal Carrying
Cart and Cylinder
Rack #042 934
Holds power source,
and gas cylinder up
to 56 in (142.2 cm)
high measuring
6 to 9 in (15.2 to 22.8 cm) in diameter.
6
Genuine Miller Accessories
XL Cart
Regular
Cart

Protective Cover
#195 478
Mildew and water
resistant, odor-free cover
protects your machine’s
finish. For 300/350 A
inverters: XMT,
Maxstar and Dynasty.
Wire Feeders/Guns
SuitCase™8VS #194 890
SuitCase™X-TREME™12VS #195 500
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8VS) or 12in (12VS) spool of wire.
Operates on open-circuit voltage eliminating
the need for a control/power cord. See Lit.
Index No. M/6.4 and M/6.41.
SuitCase™8RC/12RC #194 938/#194 940
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8RC) or 12 in (12RC) spool of
wire. Operates using 14-pin control
receptacle. See Lit. Index No. M/6.5.
XR Control #181 538
Push-pull wire feed
system offers
unparalleled performance
for aluminum MIG
welding. See Lit.
Index No. M/1.7.
70 Series
S-74S #195 057
S-74D #195 058
S-74DX #195 059
Wire feeder features
Posifeed™wire
drive assembly and handles a variety of
wires up to 1/8 in. Comes with FREE
Bernard®Q™-Gun. See Lit. Index No. M/3.0.
Spoolmatic®30A #130 831
A 1-lb, air-cooled spool gun that extends
the weld process range by adding a handy
portable system for small wire MIG. Rated
200 A at 100% duty cycle. Includes 30 ft
(9.1 m) cable assembly. (WC-24 #137 549
for 14 pin.)
Ironmate™Flux Cored Guns
See Lit. Index No. AY/16.0.
FC-1260
#195 732 10 ft (3 m)
#195 729 15 ft (4.6 m)
FC-1260LM
#194 912 10 ft (3 m)
#194 911 15 ft (4.6 m)
FC-1150
#194 864 10 ft (3 m)
#194 863 15 ft (4.6 m)
Water Coolant Systems
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Coolmate™3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up
to 600 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Coolmate™V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
Coolmate™4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
International-Style Connectors
Note: XMT 350 power sources are equipped with
International-style connectors for secondary
connections. (Power source is shipped with two
50-mm male International-style plugs for use with
#1 or #2 AWG size cable.)
International/Tweco®
Adapter #042 465
International/Cam-Lok
Adapter #042 466
One-piece adapter with International-style
male plug (to power source) on one end and
female receptacle (Tweco or Cam-Lok for
weld cable connection) on other end.
International-Style Connector Kit
#042 418 50 mm
Accepts #4 or #1/0 AWG cable size. Required
if male plugs shipped with power source must
be replaced, or if additional plugs are needed.
#042 533 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Required if #1/0 or #2/0 AWG size cable is
to be used.
Kit includes one International-style male
plug which attaches to the work and/or weld
cables and plugs into the International-style
receptacles on the power source.
Extension Kit for International-Style
Cable Connectors
#042 419 50 mm
Accepts #4 or #1/0 AWG size cable.
#042 534 70 mm
Accepts #1/0 or #2/0 AWG size cable.
Used to adapt or extend weld and/or work
cables. Kit includes one male International-
style plug and one in-line female
International-style receptacle.
Genuine Miller Accessories (continued)
7

Ordering Information
Litho in USA
Power Source and Options Stock No. Description Qty. Price
XMT®350 CC/CV #907 161 208 –575 VAC with Auto-Line™
#907 161-01-1 208 –575 VAC with Auto-Line™and Auxiliary Power
#907 161-01-2 230 –460 VAC with Auto-Line™and Auxiliary Power and CE
#907 161-01-4 208 –575 VAC with Auto-Line™and Tweco connectors
XMT®350 VS #907 224 208 –575 VAC with Auto-Line™(without 14-pin, Tweco connectors)
XMT®350 MPa #907 366 208 –575 VAC with Auto-Line™
#907 366-01-1 208 –575 VAC with Auto-Line™and Auxiliary Power
#907 366-01-4 208 –575 VAC with Auto-Line™and Tweco connectors
XMT®350 Wire Feeder Packages See page 5
Inverter Racks (full or empty) See Lit. Index No. DC/18.81
Accessories
Optima™MIG Pulse Control #043 389 For CC/CV models only. Not for use with XMT 350 MPa or VS.
Optima™Extension Cords See page 6
WC-24 #137 549 For use with Spoolmatic®30A and power sources with 14-pin
WC-115A #137 546-01-1 For use with Spoolmatic®30A and power sources without 14-pin
Process Selector Control #042 872
Gas Solenoid Kit #195 286 For XMT 350 models only
HF-251D-1 HF Starter/Stabilizer #042 388 See Lit. Index No. AY/5.1
RFCS-14 #043 554 Foot control
RHC-14 #129 340 Hand control
RMLS-14 #129 337 Rocker switch
RCC-14 #151 086 Fingertip control
RCCS-14 #043 688 Fingertip control
Extension Cords (For 24 VAC wire See page 6. Not to be used with Optima, 60M or XR-M
feeders and remote controls)
Running Gear
MIGRunner™Cart #195 445
MIGRunner™XL Cart #195 246
XMT Cylinder Cart #042 537
Universal Carrying Cart and Cylinder Rack #042 934
Protective Cover #195 478
Wire Feeders/Guns
SuitCase™8VS / X-TREME™12VS #194 890 / #195 500 See Lit. Index No. M/6.4 and M/6.41
SuitCase™8RC / 12RC #194 938 / #194 940 See Lit. Index No. M/6.5
XR Control #181 538 See Lit. Index No. M/1.7
70 Series #195 057 S-74S. See Lit. Index No. M/3.0
#195 058 S-74D. See Lit. Index No. M/3.0
#195 059 S-74DX. See Lit. Index No. M/3.0
Spoolmatic®30A Spool Gun #130 831 Includes 30 ft (9.1 m) cable assembly
Ironmate™Flux Cored Guns See Lit. Index No. AY/16.0
Water Coolant Systems See page 7. See Lit. Index No. AY/7.2
International-Style Connectors See page 7
Date: Total Quoted Price:
Distributed by: