Million Dollar Baby m4755 User manual

M4759 Emily II Combo Dresser KD Version
!!PLEASE READ!!
Assembly of this furniture is easier with two people. Assemble furniture
on debris free carpets or on the enclosed foam sheets to prevent
scratching of finish. Using any
power tools to assemble
this furniture may potentially
strip the wood.
DO NOT OVERTIGHTEN
SCREWS.
DO NOT USE THE
COMBO DRESSER IF IT
IS DAMAGED OR
BROKEN.
(H1) 1-1/8” Machine Bolts x 39 (H2) 2” Machine Bolts x 4 (H3) Cam Bolts x 8 (H4) Cam Lock x 8
(H8) Small Wood
Screws x 96 (H9) 1-1/4” Wood
Screws x 16
(H5) Knobs x 8
Tools required: Phillips screwdriver, Flat-head screwdriver.
HARDWARE
(H13) Right Panel Glide - Quantity: 4
(H14) Left Panel Glide - Quantity: 4
(H15)
Right Drawer Glide - Quantity: 4
(H16) Left Drawer Glide - Quantity: 4
(H12) Knob Screws x 8
Keep instructions
for future reference.
revised 08-2009
READ ALL INSTRUCTIONS BEFORE USE OF THE COMBO DRESSER.
WARNING!
!
(H6) Hinges x 2
(H7) Hinges
Screws x 8
(H10) Dowels x 4
(H11) Support Bars
Fasteners x 6

PARTS
Page 2
(B) Right Panel
(A) Center Panel
(C) Left Panel
(D) Large Top
(E) Small Top (F) Shelves x 2
(G) Back Panel
(Flat)
(H) Back
Panel
(Tall)
(J) Large Top and Bottom
Support Frames x 2
(L) Small Center
Support Frame
(M) Small Bottom
Support Frame
(N) Base Panel
(P) Door
(O) Support Bars x 2
(Q) Left Drawer
Panels x 4
(R) Right Drawer
Panels x 4
(S) Small Drawer
Front Panel
(T) Small Drawer
Back Panel
(U) Large Drawer
Front Panels x 3
(V) Large Drawer
Back Panels x 3
(W) Large Drawer
Bottom Boards x 3
(X) Small
Drawer
Bottom Board
(I) Legs x 4 (K) Small Top
Support Frame
(O-1) Back Support Bar

Page 3
(C) Left Panel (B) Right Panel (A) Center Panel
STEP 1
H14
H14
H14
H13
H13
H13
H14 H13
H8 H8 H8
Attach right and left panel glides
H13 and H14 using wood screws
H8 as illustrated.
Opposite side
of panel
STEP 2
Use machine bolts H1 to attach bottom support frames
J and M to the base panel (N).
Attach four legs (I) to leg brackets at the four corners of
base panel (N) using H1 as illustrated.
(I) Leg
H1
(M) Small Bottom
Support Frame
(I)
(I)
(N) Base Panel
H1
(J) Large Bottom
Support Frame
(I)
(I)

Page 4
STEP 3
Use machine bolts H1 to attach large top support frame (J) to left (C) and center panel (A). Use machine
bolts H1 to attach small top support frame (K) and small center support frame (L) to right (B) and center
panel (A). Make sure that top support frames aligns with bottom support frames.
Use machine bolts H1 to attach left and right panel to the base assembly. Use 2” machine bolts H2 to attach
the two sides as illustrated.
Attach the support bars (O, O-1) using support bar fasteners H11 and small wood screws H8 as illustrated.
STEP 4
Use machine bolts H1 to attach dresser tops
D and E to the final assembly. Insert 4 dowels
H10 into pre-drilled holes in center and right
panels A and B. Place two shelves F into the
drawer as illustrated.
H1
H1
H1
H10
(D) Large Top
(E) Small Top
(F) Shelf
(J) Large Top
Support Frame
(C) Left Panel
(A) Center
Panel
(B) Right
Panel
(K) Small Top
Support Frame
(M) Small Bottom
Support Frame
(L) Small Center
Support Frame
H1 H2
H1
H1
(O) Support Bar
H8 H11
H2
H1
H1
(F) Shelf
(O-1) Back
Support Bar

Page 5
STEP 5
Attach hinges H6 to the door (P)
to right panel (B) using wood
screws H7. Adjust and tighten
screws as illustrated.
Use knob screw H12 to attach
knob H5 to door.
STEP 6
Secure back panel G and H to the final assembly using wood screws H8.
H5
H12
(P) Door
(B) Right
Panel
H7
H7
H7
H7
H6
H6
(H) Back
Panel (Tall)
(G) Back Panel (Flat)

Page 6
Bottom Board
Use knob screw H12 to attach
knob H5 to drawer front.
IMPORTANT: As with all infant and baby furniture, it is important to check
fasteners, screws and bolts periodically for tightness. DO NOT OVERTIGHTEN.
This item has a manufacturer’s limited one-year warranty.
Visit our website at http://www.milliondollarbaby.com/ for more information.
Right
Drawer
Panel
Left
Drawer
Panel
Drawer
Front
Panel
H3
H4
H4
H3
H8
H8
H5
H12
Drawer
Back Panel
H9
H9
Align drawer glide H15 and H16 to panel glide H13 and H14. Insert drawers into assembled dresser
and your dresser is now ready for use.
H15
H16