Mimitakara 6EN User manual

User Manual
Bluetooth Microphone
6EN

目錄
BLUETOOTH MICROPHONE TRANSMITTER
FEATURES
BASIC SETUP
POWER ON / OFF
WEARING INSTRUCTIONS
CHARGING INSTRUCTIONS
MODES AND VOLUME
INDICATOR LIGHT
USER SUPPORT
TROUBLESHOOTING
LEGAL INFORMATION
SPECIFICATION
1
2
2
2
3
3
4
7
8
8
9
12

1
Bluetooth microphone transmitter ( also called
transmitter ) can receive long-distance sound trans-
mission to the hearing aid (placed within 8m from
the hearing aid). Example: Put the Bluetooth micro-
phone transmitter next to the TV to transmit the
sound from the TV to the hearing aid, or hang the
Bluetooth microphone transmitter on the speaker to
transmit the distant sound to the hearing aid, giving
you better hearing enjoyment.
BLUETOOTH MICROPHONE
TRANSMITTER

2
FEATURES
Power
ON / OFF
Indicator
Light
Microphones
Mode
Volume(+)
Volume(-)
Back Clip
Charging
Port
POWER ON / OFF
● Power ON: Slide the ON/OFF switch to the ON
position.
● Power OFF: Slide the ON/OFF switch to the OFF
position.
BASIC SETUP

3
WEARING INSTRUCTIONS
The microphone can be worn on the collar of the call
partner to receive the spoken voice and transmit it to
T3 hearing aid, so that the hearing-impaired can
obtain a clearer hearing experience.
It can also be used for watching TV, meeting, listen-
ing to performances... put it on the radio.
We recommend charging the Transmitter before
initial use.
● Use the provided USB cables to charge the Trans-
mitter.
● Use a USB charging adapter that is rated with an
output voltage of 5V and an output current of over
250mA
※ USB adapter not included
CHARGING INSTRUCTIONS

4
● Transmitter：
Flashing Red: Charging
Solid Red: Charging Complete
Notice
※ Avoid charging in high temperature environment.
※ With the increase of charging and discharging
times, the battery will gradually age. It is recom
mended to replace the battery every two years.
Please contact the dealer and do not replace it by
yourself.
MODES AND VOLUME

5
There are 2 modes to the Transmitter, to switch
between the 2 modes press the button M on the
Transmitter.
Turn the switch to ON to turn on the transmitter. After
it is turned on, it will automatically connect to T3
hearing aid. When not connected, the blue light
flashes slowly, and the blue light flashes quickly after
the connection is successful.
After the connection is successful, the volume button
can be used to adjust the volume of the
hearing aid and to switch the Bluetooth micro-
phone mode.
※ Reminder: Please adjust the volume appropriately,
as excessive volume may cause hearing damage.
※ The Bluetooth function can only work one-to-one.
When connecting to a Bluetooth device (such as a
mobile phone), please turn off the transmitter; if you
need to use the transmitter to receive audio, please
turn off other Bluetooth devices.
、

6
● Mode 1: Assistive Listening Mode:
There are three levels of volume in Assistive Listening
Mode, operated as follows:
Button : Decrease the volume
Button : Increase the volume
Button : Enter microphone mode, at this time the
blue light is on, and the headphone audio is sent from
the microphone transmitter to the headphone.
● Mode 2: Microphone Mode:
There are 15 levels of volume in the Microphone
Mode.
Button : Decrease the volume of the microphone,
the headphone will hear a beep, and when it reaches
the minimum volume, there will be two beeps.
Button : Increase the volume of the microphone,
the headphone will hear a beep, and when it reaches
the maximum volume, there will be two beeps.
Button : Turn off the microphone mode, the blue
light flashes slowly, and the headphone switch to
assistive listening mode.

7
INDICATOR LIGHT
Charging
Charging complete
Solid Blue
Flash Blue showly
LightTransmitter
Not connected T3
Auto-connected T3
Mic-on mode
Mic-off mode
Flash Blue quickly
Flash Blue slowly
Flashing Red
Solid Red
Flashing RedAbout to power-off

8
For any reason, do not service your transmitter
yourself, that can easily cause more damage to the
transmitter. Refer to troubleshooting when your
transmitter is unusable or unusual.
If the troublehsooting doesn
’ t solve your problem,
please contact initial point of purchase or our
customer service team at:
www.digisineproducts.com
www.mimitakarahealth.com
TROUBLESHOOTING
USER SUPPORT

9
LEGAL INFORMATION
FCC
Federal Communications Commission (FCC) State-
ment
15.105(b)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.

10
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user
is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
15.21
You are cautioned that changes or modifications not
expressly approved by the part responsible for
compliance could void the user’s authority to
operate the equipment.

11
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operat-
ing in conjunction with any other antenna or trans-
mitter.
2. For portable operation, this device has been tested
and meets FCC RF exposure guidelines. When used
with an accessory that contains metal may not ensure
compliance with FCC RF exposure guidelines.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC ID：2BBAZ-6KNX
R 201-jjxxxx

12
SPECIFICATION
Model UP-6KNX
Dimensions 4.47 x 1.4 x 3.3 cm
Weight 30±5 g / pcs
Color White / Black
Power Type-C ; 3.7V 230mA
Charging time 2 Hours
Continuous Use 8 Hours
Bluetooth 8 meters
distance

Copyright © Digibionic 2023.V.1.2