Mimosa 0101381 User manual

10-1
CORAL BAY 4 PCE CORNER
LOUNGE SETTING
ASSEMBLY INSTRUCTIONS
Item No. 0101381
1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4.WASHERS MUST BE USED.
5.WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.
6.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY

10-2
CORAL BAY 4 PCE CORNER
LOUNGE SETTING
ASSEMBLY INSTRUCTIONS
Item No. 0101381

10-3
#1
#2
#3
#4
#5
#6
#7
#8
#9
CODE PARTS QTY.
PARTS LIST
2PCSeat
2PCBack Rest
1PCLeft Arm Rest
1PCRight Arm Rest
1PC
4PC
1PC
4PC
1PC
Corner
Back Cushion
Corner Cushion
Seat Cushion
Corner Seat Cushion

A
B
C
D
E
CODE PARTS QTY.
HARDWARE LIST
10-4
6PCS
2PCS
2PCS
12PCSBolt - M6 x 35
30PC
F8PC
J
22PC
G
8PC
H
1PC
I
1PC
Bolt - M6 x 50
Bolt - M6 x 70
Bolt - M6 x 75
Washer
Bolt
Bolt Cap 1
Bolt Cap 2
Allen Key
Wrench

Secure the left and right armrests (#3&#4) to the seat (#1) using bolts (A)
and washer (E). Tighten using Allen key (I) and cover with bolt cap (G).
Secure the back rest (#2) to arm rest (#3&#4) using bolts (D) and washers (E).
Secure using Allen key (I) and cover with bolt cap (G). Please ensure that the
wider section of the back rest is connected to the arm rest.
10-5
2
#3 #1 #1
#4
I
G
A
I
E
G
A
E
#2 #2
2
DI
E
G
D
I
E
G

Secure the back rest (#2) to the seats(#1) using bolts (A) and washers (E).
Now that all bolts are in position tighten securely using Allen key (I) and
cover with bolt cap (G)
10-6
3
3
4Secure the corner seat (#5) to the seat (#1) using bolts (B&C) and washers (E).
Now that all bolts are in position tighten securely using Allen key (I) and cover
with bolt cap (G&H).
I
G
A
E
#5
B
C
I
I
E
E
F
H
J
J
E
E
F
H
G
G

Place the seat and back cushions (#6,#7,#8 &#9) on your setting.
10-7
#6
#6
#6 #6
#7
#8
#8
#8
#8
#9
3
5
6
Place your setting in the desired location. The foot adjusters can
be used to level the setting if the surface is uneven.
#5

10-8
CORAL BAY 4 PCE CORNER
LOUNGE SETTING
ASSEMBLY INSTRUCTIONS
Item No. 0101381

A
B
C
D
E
CODE PARTS QTY.
HARDWARE LIST
10-9
4PCS
8PCS
8PCS
4PCSBolt - M6 x 30
1PC
Bolt - M6 x 45
Washer
Bolt Cap
Allen Key
#1
#2
#3
#4
CODE PARTS QTY.
PARTS LIST
1PCTable Frame
1PCTable Leg
1PCTable Leg
1PCGlass

Place the table top frame (#1) upside on a clean protected surface.
Secure the table leg (#2&#3) to the table top frame (#1) using bolts
(A&B) and washer (C). Tighten using Allen key (E) and cover with
bolt cap (D).
Turn over the table and place glass on frame. Your table now is ready to use.
10-10
2
B
A
CCE
D
D
#2
#1 #3
#3
#4