
1) Orient the bracket such that there is space
between the top of the bracket and the
cabinet, and align the holes in the bracket
with the inserts in the face of the cabinet.
2) Secure the bowl bracket (H) to the front
face of the cabinet using 6 bracket
screws (I) as shown.
3) Screw the stabilizer nut (K) onto the stabilizer
bolt (J), then screw the bolt into the center
of the 3 holes in the bottom of the bracket.
K
K x1
H
x7
x1
I
x1J
7
x2
A
B x1
A
A
B
5 - Completing the bowl shroud (1 of 2)
B
A x4
x2
B
A
A
B
1) Screw 4 cam screws (A) and insert
2 dowels (B) into the front panel of
the bowl shroud (8) as shown.
2) Secure the front panel to the
assembly using 4 cam locks (A).
A
A
6 - Completing the bowl shroud (2 of 2)
8
B2 - Installing the bowl
B1 - Installing the bowl hardware (Included in bowl purchase)
1) Screw 2 cam screws and insert
1 dowel (B) into the cabinet front
as shown.
2) Secure the left shroud panel (7)
to the assembly from step 5
using 2 cam locks (A).
H
J
I (7x)
1) Slide the hook points on the back of
the Callaway Shampoo Bowl (10) into
the notches in the mounting bracket.
2) Through the access panel, adjust the
stabilizer bolt so that the bolt head is
close to but not touching the bowl (~1/8"),
then hand-tighten the stabilizer nut to the
bracket to lock the bolt in place.
3) Get a licensed plumber to make all necessary
connections and test the unit. See the instructions
included with the bowl for proper installation.
Hand-turn stabilizer
nut tight against
bowl bracket
10
- Dust often using a clean, soft, dry and lint-free cloth.
- Blot spills immediantly and wipe with a clean, damp cloth.
- We do not recommend the use of chemical cleansers,
abrasives, or furniture polish on our lacquered finish.
- Hardware may loosen overtime. Periodically check to make
sure all connections are tight. Re-tighten if necessary.
Care Instructions