MiniFinder PICO User manual

MiniFinder®Pico
User Manual
English
© 2020 MiniFinder® All rights reserved
Updated: 2020/11/18

User Manual
minifinder pico
www.mininder.com 1of 20
Thank you for purchasing a MiniFinder®product. We believe you made the right choice. MiniFinder®
Pico is full of smart features that help you monitor, protect and locate your loved ones remotely.
Before you start using your Pico, please read this manual in its entirety.
Thank you!Thank you!
PACKAGE CONTENTSPACKAGE CONTENTS
1. MiniFinder Pico
2. Micro USB charging cable
3. Charging station (accessory)
1 2 3
1 2 3
PRODUCT OVERVIEWPRODUCT OVERVIEW 1
2
7
3 84
2. USB charging port
3. Panic button (SOS)
1. On / O & Call button
5. GPS LED light
6. GSM LED light
4. Microphone
6
5
7. Speaker
8. Charging contact pins
PRODUCT MANAGEMENTPRODUCT MANAGEMENT
A. Please charge your device for 4 hours before using for the rst time.
B. During charging, the blue LED is steady. (Red light on the charging station).
C. Blue LED light goes out when fully charged. (Red light goes out on the charging station)
D. START the unit by pressing ON / OFF button for 3 seconds.
E. TURN OFF the device by pressing and holding SOS and ON / OFF buttons for 3 seconds.

User Manual
minifinder pico
www.mininder.com 2of 20
EXPLANATION OF LED LIGHTSEXPLANATION OF LED LIGHTS
DOWNLOAD MINIFINDER GO APPDOWNLOAD MINIFINDER GO APP
To set up and track your MiniFinder®Pico, you need to download MiniFinder GO Tracking System APP.
Download the app by searching the “MiniFinder GO GPS Tracking” in Apple App Store
or Google Play store. Install the app to log in with your created or assigned login details.
If you read the documentation on your mobile phone, please click on the link below to download
the APP.
Apple iPhone: https://apple.co/2P3oYxN Android: http://bit.ly/2IengsS
Steady light = No or faulty SIM card
Single blink = Connected to GSM network
3 sec
Double blink = Connected to GPRS network
3 sec
Slow blink = Searching for GSM network
1 sec
GREEN LED:
BLUE LED:
3 sec Single blink =
Connected to satellite
1 sec Slow blink =
Searching for GPS signal
Steady blink = Charging
No light = Sleep mode or fully charged

User Manual
minifinder pico
www.mininder.com 3of 20
APP OverviewAPP Overview
After logging in the MiniFinder GO APP, you will see the view as shown below.
This consists of 9 dierent parts:
1. Menu (Device list)
2. Alarm notication
3. Create / Edit GeoFence
4. Applications settings
5. Application info & Help
6. View the position of my mobile phone
7. Zoom in / out
8. View street information of a selected GPS device
9. GPS device location indication on the map
Menu/Device ListMenu/Device List
Click the menu icon to open the menu. The menu consists of one or more devices (GPSs) depending
on how many licenses you have in the system.
1. Unit name
2. Time for the last position
3. Status icons:
Battery, GPS signal, GSM signal and motion
4. Action menu (history, settings, ...)

User Manual
minifinder pico
www.mininder.com 4of 20
Device StatusDevice Status
A GPS unit can have three dierent colors indicating status. Green (Online), Orange (Passive),
Red (Passive) and White (Oine).
A) Green: The device is online and sending position
right now.
B) Orange: The device is passive and has sent last
position more than 10 minutes ago.
C) Red: The device is passive and has sent last posi
tion more than 1 hour ago.
D) White: The device is oine.
Regardless of the device’s status, you can always press the device row to display the latest
position on the map.
Alarm NoticationAlarm Notication
MiniFinder GO APP supports various types of alarms: Geofence alarm, Fall alarm, SOS / Panic alarm,
Low battery alarm and speeding alarm. All alarms send an alarm notication to the phone’s or tablet’s
screen. Audio alert, vibration and ashing alarm can be activated when opening the APP.
Images below show examples of alarm notications:
- An example of notications on a phone´s screen. - A ashing bell at the top right corner of the app.
- Click on the ashing alarm bell to see active alarms. Click on active alarms to conrm and move them
to the alarm history.

User Manual
minifinder pico
www.mininder.com 5of 20
Action MenuAction Menu
At the far right of the row of units is an Action Menu (three vertical points). In the Action Menu you
can see history (History), call (Call) and settings (Setup).
HistoryHistory
See positioning history on the map based on date and time.
- Start by clicking the Action Menu (1), then click “History” (2).
- Select a time period and then click “View History” to display the device’s positioning history.

User Manual
minifinder pico
www.mininder.com 6of 20
- The following information is displayed for positioning history:
1. A is the start position
2. B is the end position
3. Indicates a particularly selected position
4. The start date and time
5. The end date and time
6. Drag the blue dot to see a particular
position (3) on the map.
- When bringing up the sub screen, the detailed statistics are shown, including total distance,
total time and max speed. To clear the selected history, simply click “Clear History”

User Manual
minifinder pico
www.mininder.com 7of 20
Rename DeviceRename Device
Edit device name through Device Setting.
Click the Action Menu (1) and then click on the “Setup” (2). Edit device name (3) with your preference.
Then click “Apply” (4) to save the changes.
Call the DeviceCall the Device
To ring your device from your telephone, simply click on Action Menu (1) and then click on “Call” (2)
to start calling.

User Manual
minifinder pico
www.mininder.com 8of 20
Authorize Telephone NumbersAuthorize Telephone Numbers
To be able to call or receive calls from the device, one or more phone numbers need to be authorized
in the device. Telephone number 1 is used as the rst alarm receiver of the panic alarm (SOS button).
Only phone number 2 receives calls from the call button.
- Open MiniFinder GO APP, click the Action Menu (1) and then click on the “Setup” (2).
NOTE! All MiniFinder devices include a roaming-free SIM card with a foreign telephone number.
- Enable authorization (3).
- Click on the ag (4) to select a country code.
- Select a country in the list (5).
- Enter a telephone number (6) to receive alarms.
- Click “Apply” to save the settings.
3
4
5
6

User Manual
minifinder pico
www.mininder.com 9of 20
Make A CallMake A Call
To make a call, please press and hold the on / o / call button for 3 seconds. The unit emits an indi-
cation, the green LED starts blinking, and begins dialing to the authorized phone number 2. To end the
call, press the SOS button.
Fall AlarmFall Alarm
An accidental fall can cause devastating consequences. When an accidental fall occurs, the MiniFinder®
remote sensor sends an alarm to the APP in the form of an alarm notication on the mobile device’s
screen and an alarm bell in the APP.
- To enable the Fall Alarm, click the Action Menu (1) and then select “Setup” (2).
- Activate “Fall Alarm” (3) as shown below and click ”Apply” (4) to save the settings.
To end an ongoing fall alarm, press SOS button once.