manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. MINITOOLS
  6. •
  7. Monitor
  8. •
  9. MINITOOLS SEPDISP24B User manual

MINITOOLS SEPDISP24B User manual

Popular Monitor manuals by other brands

Samsung ME32C user manual

Samsung

Samsung ME32C user manual

ViewSonic VA926-LED user guide

ViewSonic

ViewSonic VA926-LED user guide

Furuno Mu 120c Operator's manual

Furuno

Furuno Mu 120c Operator's manual

Asus VB171D - 17" LCD Monitor Service manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

AOC 9GLR Technical specifications

AOC

AOC 9GLR Technical specifications

DMG RAFFAELLO manual

DMG

DMG RAFFAELLO manual

AOC LM720 - 17" Technical specifications

AOC

AOC LM720 - 17" Technical specifications

Sony Trinitron GDM-F500 Service manual

Sony

Sony Trinitron GDM-F500 Service manual

Memorex MT1701 user guide

Memorex

Memorex MT1701 user guide

ViewSonic VE510s-4 Service manual

ViewSonic

ViewSonic VE510s-4 Service manual

Farenheit T-1503CM instruction manual

Farenheit

Farenheit T-1503CM instruction manual

Ditel DINOS DN129/AT Quick installation guide

Ditel

Ditel DINOS DN129/AT Quick installation guide

Sony SDM-S51 Specifications

Sony

Sony SDM-S51 Specifications

Kenwood DMX1025BT quick start guide

Kenwood

Kenwood DMX1025BT quick start guide

Dell S2409WFP user guide

Dell

Dell S2409WFP user guide

EverFocus EN-7517E instruction manual

EverFocus

EverFocus EN-7517E instruction manual

Dell P3222QE user guide

Dell

Dell P3222QE user guide

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

SEPDISP24B modifi cation
Modifi ca SEPDISP24B
ver. 1.3C Pag. 1/12www.minitools.com www.minitools.com
Istruzioni di montaggio
Assembly instructions
SEPDISP24B
ver. 1.3C
Modifi ca SEPDISP24B
ver. 1.3C Pag. 1/12www.minitools.com
SEPDISP24B modifi cation
Prima di effettuare l’installazione del display SEPDISP24B, si consiglia
vivamente di leggere con attenzione le seguenti istruzioni e seguire il relativo
video su: www.mini.tools/doc/sepdisp24b.mp4
IMPORTANTE - WARNING
Before installing the new display SEPDISP24B, please read carefully the
following instructions and watch the related video:
www.mini.tools/doc/sepdisp24b.mp4
Il display SEPDISP24B
è adattabile a tutti i
contachilometri VDO
e JAEGER/MARELLI
e sostituisce i display
Minitools SEPDISP03E e
SEPDISP05E.
The SEPDISP24B display
is adaptable to all VDO
and JAEGER/MARELLI
clusters and replaces
Minitools SEPDISP03E and
SEPDISP05E display.
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com
ver. 1.3C Pag. 2/12
• Audi A2 VDO (until 2005)
• Audi A3 VDO (until 2003)
• Audi A4 VDO (until 2003)
• Audi A6 VDO (until 2005)
• Volkswagen Bora (until 2003)
• Volkswagen Golf IV VDO (until 2003)
• Volkswagen Passat VDO (until 2003)
• Volkswagen Sharan (until 2003)
• Volkswagen Transporter (T4/T5, until 2003)
• Seat Alhambra (until 2004)
• Seat Ibiza (until 2004)
• Seat Leon (until 2004)
• Skoda Fabia (until 2004)
• Skoda Octavia (until 2004)
• Audi A3 JAEGER (until 2003)
• Audi A4 JAEGER (until 2003)
• Audi A6 JAEGER (until 2003)
• Audi TT JAEGER (until 2003)
Alcuni dei modelli auto supportati1- Some supported car models1
Nota 1: elenco parziale Note 1: partial list
Dopo aver dissaldato il
display originale, pulire
con treccia dissaldante
i contatti per eliminare
lo stagno in eccesso.
E’ consentito l’uso del
fl ussante.
After desoldering the
original display, clean
the contacts with a
desoldering braid to
remove solder in excess.
Flux can be used.
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com ver. 1.3C Pag. 3/12
• Seat Alhambra (until 2004)
• Seat Ibiza (until 2004)
• Seat Leon (until 2004)
• Skoda Fabia (until 2004)
• Skoda Octavia (until 2004)
• Audi A3 JAEGER (until 2003)
• Audi A4 JAEGER (until 2003)
• Audi A6 JAEGER (until 2003)
• Audi TT JAEGER (until 2003)
Alcuni dei modelli auto supportati1- Some supported car models1
Pulire lo stagno in
eccesso sui pad per
evitare che lo schedino
risulti sollevato.
Clean as well the pads
to avoid that the small
board remains raised up.
Posizionare lo schedino
partendo dal 1° pin in
basso a destra.
Place the small board on
the circuit starting from
pin 1 at the bottom right.
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com
ver. 1.3C Pag. 4/12
Solo per i quadri
JAEGER/MARELLI, i 4
pin a sinistra resteranno
non collegati.
Just for JAEGER/
MARELLI clusters, the 4
pins on the left won’t be
connected.
Per quadri strumenti
VDO, tutti i pin saranno
collegati.
Just for VDO clusters, all
pins will be connected.
JAEGER/MARELLI
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com ver. 1.3C Pag. 5/12
Lasciare 1 mm di spazio.
Leave a space of 1 mm.
Effettuare le saldature
singolarmente, pin per
pin, con stagno sottile
0,2 mm e punta ad ago.
E’ sconsigliato l’uso di
fl ussante. Terminata la
fase di saldatura pulire con
apposito prodotto.
Solder all single pin with
0,2 mm thin solder wire
and needle tip. Don’t use
solder fl ux. After soldering
the small board, clean with
a solvent.
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com
ver. 1.3C Pag. 6/12
Inserire il fl at del
nuovo display nel
connettore dello
schedino con il pin 1
sulla destra (come in
foto).
Insert the fl at of the
new display into the
connector of the
small board. Pin 1
must be on the right
(as in picture).
Aprire il connettore
dello schedino,
facendo leva sulle
due estremità, prima
di inserire il fl at del
nuovo display.
Open the plug on the
small board, pressing
on both sides, to
insert the fl at of LCD.
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com ver. 1.3C Pag. 7/12
Posizionare il fl at ripiegandolo
sotto il display. Assicurarsi
che le parti in plastica non
esercitino pressione sul fl at
una volta rimontate. Se questo
dovesse verifi carsi, cercare una
migliore posizione per il fl at.
Make sure plastic elements
of the cluster won’t cause
pressure on the fl at when it is
fi xed. If this happens, try to fi nd
a better position for it.
Tagliare la ghiera metallica
prima dell’inserimento, nei
due punti indicati.
In mancanza di questa
procedura, la ghiera
potrebbe danneggiare il
display.
Before placing the metal
gear, cut it as in picture.
Without following this
procedure the display could
be hardly damaged.
SEPDISP24B modifi cation
Modifi ca SEPDISP24B
www.minitools.com
ver. 1.3C Pag. 8/12
Testare il contachilometri
fornendo alimentazione sul
connettore blu:
• pin n.7: negativo
• pin n.1 e n.23: positivo
Test the cluster supplying
power to the blue
connector:
• pin n.7: negative
• pin n.1 and n.23: positive
Se il display rimane
spento, seguire le
istruzioni indicate nelle
pagine successive.
If the display stays off,
follow the instructions
below.