Minnesota Fats MFT200CCAF User manual

2-MFT200CCAF- -MW
MFT200CCAF
1-866-556-2757
FAX: [phone]
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Your Model Number _________________________
have your model number when inquiring about parts.
[email protected]
Please
Date Code ________________________________
© 2016 Escalade Sports For Customer Service Call 1-866-556-2757
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
1
All Rights Reserved.
Purchase Date _____________________________
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

© 2016 Escalade Sports For Customer Service Call 1-866-556-2757
2
All Rights Reserved.
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSSEMBLY.
Allen Wrench T1 Included with the Hardware Kit
Furniture Polish and Cloth
Make sure you understand the following tips before you begin to assemble your pool table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.
TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS
THIS MINNESOTA FATS FAIRFAX 6.5FT POOL TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS POOL TABLE
TOGETHER.
ATTENTION:

© 2016 Escalade Sports For Customer Service Call 1-866-556-2757
3
All Rights Reserved.
HARDWARE IDENTIFIER
H1 - M6 x 27mm
Allen Head Bolt (16)
H3 - 6 x 15 mm
Flat Washer (24)
H2 - M6 x 25mm
Allen Head Bolt (8)
H4 - 3.5 x 12mm
Phillips Round
Head Screw (12)
(Not To Scale)
(To Scale)
PARTS IDENTIFIER
P1 - Pool Table Cabinet (1) P2 - Right Leg (2) P3 - Left Leg (2)
P4 - End Leg Panel (2) P5 - Side Leg Panel (2) P6 - Leg Leveler (4)
T1 - Allen Wrench(1)
(Not to Scale)

© 2016 Escalade Sports For Customer Service Call 1-866-556-2757
4
All Rights Reserved.
ACCESSORIES IDENTIFIER
A1-Cue Chalk(2) A2-Cue Stick(2) A3-Billiard
Ball Set(1)
A4-Triangle(1)
A5-Playfield
Cloth Brush (1)
(Not To Scale)
!
WARNING:
CHOKING HAZARD
Small parts.
Not for children under 3 yrs.

© 2016 Escalade Sports For Customer Service Call 1-866-556-2757
5
All Rights Reserved.
PARTS REQUIRED:
16 pcs - H1 Allen Head Bolt
16 pcs - H3 Flat Washer
2 pcs - P2 Right Leg
2 pcs - P3 Left Leg
4 pcs - P6 Leg Leveler
1 pc - T1 Allen Wrench
STEP 1:
To assemble this table, leave the P1 Pool Table Cabinet face down in the carton lid. As shown in
Figure 1, attach the P2 Right Legs and P3 Left Legs on the inside of the frame with H1 Allen Head
Bolts and H3 Flat Washers. Use the T1 Wrench to tighten the bolts. Thread the P6 Leg Levelers
into the bottom of each leg.
Figure 1
NOTE:
Install legs exactly as
per Figure 1 for correct
P4 End Leg Panel assembly.
P2 Right
Leg
P2 Right
Leg
P3 Left Leg
P3 Left Leg
P1 Pool Table
Cabinet
P6 Leg
Leveler
H1 Allen
Head Bolt
H3 Flat
Washer