Minolta Fiery Z4 User manual

Operator´s Manual
PageScope Light
Fiery Z4/X3e for CF9001
7664-1179--11

i
Foreword
Welcome
PageScope Light Fiery Z4/X3e for CF9001 is a device control utility
program provided by the HTTP server built into the Fiery Z4/X3e
(printer controller for CF9001). With a standard Web browser, this
utility can be used as an interface for remote control of the CF9001.
Trademark Acknowledgements
Minolta is a registered trademark of MINOLTA CO., LTD.
Apple and Macintosh are registered trademarks of Apple Computer,
Inc.
Ethernet is a registered trademark of Xerox Corporation.
Fiery and the Fiery logo are registered trademarks of Electronics for
Imaging, Inc. Fiery WebTools is a trademark of Electronics for
Imaging, Inc.
Linux is a registered trademark of Linus Torvalds.
Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation.
Netscape Communications, the Netscape Communications logo,
Netscape Navigator, Netscape Communicator, and Netscape are
trademarks of Netscape Communications Corporation.
PostScript is a registered trademark of Adobe Systems, Inc.
Solaris is a trademark of Sun Microsystems, Inc.
All other product names are trademarks or registered trademarks of
their respective holders.
Copyright 2000 MINOLTA CO., LTD.
The information contained in this manual is subject to change
without notice to incorporate improvements made on the product
or products the manual covers.

ii
Contents
CONTENTS
1 System Requirements
.......................................1
2 Access
....................................................................2
2.1 Operation ...........................................................2
3 Screen Configuration
........................................3
4 System Tab
............................................................5
4.1 Summary ...........................................................5
4.2 Details ................................................................6
4.2.1 Input Tray .................................................6
4.2.2 Output Tray ..............................................7
4.2.3 Hard Disk Status ......................................8
4.2.4 ROM Version ............................................9
4.2.5 Interface Information .............................10
4.2.6 Consumable Status ...............................11
4.3 Preference .......................................................12
4.4 Online Assistance ...........................................13

Contents
iii
5PrinterTab
...........................................................15
5.1 Printer Front Panel ..........................................15
5.2 Test Print ..........................................................16
5.3 PostScript Font ...............................................17
Appendix Status List ...................................
18

1 System Requirements
1
1 System Requirements
The following items are required to use this utility.
Computer
• Software
• NIC (Network Interface Card)
• Ethernet or Token Ring
• TCP/IP Protocol
CF9001
Printer Controller
• Fiery Z4 for CF9001 (external) or Fiery X3e for CF9001 (built-
in)
Operating System Web Browser
Windows 95/98/NT 4.0/2000 Internet Explorer 3.02 or higher
Netscape Navigator 3 or higher
Macintosh System 7 or higher Internet Explorer 4.5 or higher
Netscape Navigator 4 or higher
Solaris 2.5.1/2.6/7 (2.7) Netscape Navigator 4 or higher
Linux Netscape Navigator 4 or higher

2 Access
2
2 Access
PageScope Light Fiery Z4/X3e for CF9001 can be accessed directly
from a Web browser.
1. Start the Web browser.
2. In the URL field, enter the IP address of the printer controller as
shown below.
http:// <IP address of printer controller> /
(Example) When the IP address of the printer controller is
192.9.200.200:
http://192.9.200.200/
3. This causes the PageScope Light Fiery Z4/X3e for CF9001 screen
to appear.
2.1 Operation
PageScope Light Fiery Z4/X3e for CF9001 operation is identical to
that for Internet Web pages. Clicking a hot link jumps to the link
destination, and the Back and Forward buttons scroll through pages
backwards and forward.

3 Screen Configuration
3
3 Screen Configuration
The configuration of the PageScope Light Fiery Z4/X3e for CF9001
screen is shown below.
Note
➀Minolta PageScope Light Logo
Clicking the logo jumps to the Website shown below.
www.minolta.com
➁Status Display
The current status of the CF9001 is indicated by both icons and
text. The message Ready appears in the top line of text when
the CF9001 is operating normally. For full details about screen
contents, see Appendix – Status List.
• Screen images shown in this manual may differ slightly from actual
ones. In addition, specifications are subject to change without prior
notice.
➀
➀➀
➀➁
➁➁
➁➂
➂➂
➂
➃
➃➃
➃
➅
➅➅
➅
➄
➄➄
➄

3 Screen Configuration
4
➂Tabs
Use the tabs to select the category of items you want to display.
For full details about tab contents, see 4 – System Tab and
5 – Printer Tab.
➃Menus
Use the menus to select information or setting items. The
menus that appear depend on the currently selected tab.
For full details about menu contents, see 4 – System Tab and
5 – Printer Tab.
➄Information and Settings Display
This display shows information or settings in accordance with
the selected menu item.
➅Fiery WebTools Logo
Clicking this logo displays the settings page for Fiery
WebTools, which is built in to the printer controller. For details
about Fiery WebTools, see the Fiery Z4/X3e Operator’s Guide.

4 System Tab
5
4 System Tab
The System tab shows information about and settings for the CF9001
system configuration.
4.1 Summary
This screen is the initial screen when you access http://<IP address of
printer controller> with your Web browser. You can also display the
Summary screen by clicking the Summary menu on the System tab.
The Summary screen shows the current CF9001 system configuration.
Device Status This area uses graphics and text to shows the
configuration of options installed on the CF9001.
Operational Panel Display
This area shows the printer controller message
display. Messages are the same as the Status
Display messages that appear in the upper part of
the window.

4 System Tab
6
Configuration Summary
This area shows an overview of the current
CF9001 system configuration.
4.2 Details
This screen appears when you click the Details menu on the System
tab. It shows details about each of the CF9001’s units. Clicking a sub-
menu under the Details menu displays information about the
applicable unit.
4.2.1 Input Tray
This screen appears when you click the Input Tray sub-menu under the
Details menu. It shows the configuration of all the Input Trays installed
on the CF9001.
Tray Tray name
Paper Size Size of paper loaded in the tray
Media Type Type of media loaded in the tray
Orientation Orientation of paper loaded in the tray

4 System Tab
7
Capacity Maximum number of sheets that can be loaded in
the tray
Paper Remaining paper status (Shows Ready when
paper is present, and Empty when there is no
paper left.)
4.2.2 Output Tray
This screen appears when you click the Output Tray sub-menu under
the Details menu. It shows the configuration of all the Output Trays
installed on the CF9001.
Tray Tray name
Capacity Maximum number of sheets the tray can hold
Paper Tray status (Shows Full when the tray is unable to
receive any more paper, and Ready when it is.)

4 System Tab
8
4.2.3 Hard Disk Status
This screen appears when you click the Hard Disk sub-menu under the
Details menu. It shows the status of the hard disk installed on the
printer controller.
Usage Percent of hard disk space used (%)
Used Amount of hard disk space used (KB)
Free Amount of hard disk space free (KB)

4 System Tab
9
4.2.4 ROM Version
This screen appears when you click the ROM Version sub-menu under
the Details menu. It shows information about the on-board memory of
the CF9001 and the printer controller.
Copier Version of ROM installed on the CF9001
Printer Controller
Version of firmware installed on the printer
controller
PDL Info Version of printer control codes (PostScript) used
by the printer controller

4 System Tab
10
4.2.5 Interface Information
This screen appears when you click the Interface Info sub-menu under
the Details menu. It shows information about the printer controller
interface.
Network I/F Network interface type (Ethernet 10/100BaseT or
Token Ring)
Local I/F Local port type

4 System Tab
11
4.2.6 Consumable Status
This screen appears when you click the Consumable sub-menu under
the Details menu. It shows the current status of CF9001 consumables.
For information about consumables, see the CF9001 Operator’s Manual.
Black Toner Remaining black toner
Yellow Toner Remaining yellow toner
Magenta Toner Remaining magenta toner
Cyan Toner Remaining cyan toner
Waste Toner Remaining waste toner bottle capacity
Staple Remaining staples
Fuser Oil Remaining oil in fuser web unit

4 System Tab
12
4.3 Preference
This screen appears when you click the Preference menu on the System
tab. It lets you make changes to the PageScope Light environment.
Password Type in the password here when a password is
defined. Note that the password is case-sensitive,
so be sure to type in upper-case and lower-case
characters correctly. (The password you should
type in here is the same as the administrator
password you created for Fiery WebTools.)
Refresh Rate Type in a value to specify the number of seconds
between screen refreshes. You can input a value
from 30 to 300 seconds. The default setting is 60
seconds.
Language Select the screen language you want to use for
PageScope Light.
• English
• German
• French
• Italian
• Spanish

4 System Tab
13
Apply Button Click this button to apply any settings you have
input or selected up to this point.
Clear Button Click this button to cancel any settings you have
input or selected up to this point.
Note
4.4 Online Assistance
This screen appears when you click the Online Assistance menu on
the System tab. It shows information and lets you make settings
related to product support.
Password Type in the password here when a password is
defined. Note that the password is case-sensitive,
so be sure to type in upper-case and lower-case
characters correctly. (The password you should
type in here is the same as the administrator
password you created with Fiery WebTools.)
• The message Invalid Password appears on the screen if you input the
wrong password. If this happens, click your Web browser’s Back button
to return to the previous page and configure your preferences again.

4 System Tab
14
Contact Type in the name of your product support counter.
Contact Tel Number
Type in the phone number of your product support
counter.
Product Help URL
Type in the URL of your product information
Website. Clicking the Product Help URL jumps
to the Website you specify here.
Minolta Corporate URL
Type in the URL to the Minolta home page.
Clicking the Minolta Corporate URL jumps to the
Website you specify here.
Tel Number for Supplies and Accessories
Type in the telephone number of the support
counter you need to contact to order consumables
and accessories.
Apply Button Click this button to apply any settings you have
input up to this point.
Clear Button Click this button to cancel any settings you have
input up to this point.
Note
• The message Invalid Password appears on the screen if you input the
wrong password. If this happens, click your Web browser’s Back
button to return to the previous page and configure your online
assistance settings again.

5 Printer Tab
15
5PrinterTab
The Printer tab shows information and settings for printing on the
CF9001.
5.1 Printer Front Panel
This screen appears when you click the Operational Panel menu on
the Printer tab. It provides on-screen emulation of the printer
controller’s operational panel.
Display This area shows the printer controller message
display. Messages are the same as the Status
Display messages that appear in the upper part of
the window.
Online Button Toggles the printer controller network connection
on line and off line