minrray UV950 User manual

HD
HD
HD
HD Video
Video
Video
Video Conference
Conference
Conference
Conference
Camera
Camera
Camera
Camera
User
User
User
User Manual
Manual
Manual
Manual
1.0
1.0
1.0
1.0 version
version
version
version
（
English
English
English
English
）
All manuals and user guides at all-guides.com
all-guides.com

Preface:
Preface:
Preface:
Preface:
Thanks for using our HD color video conference camera.
This manual introduces the function , installation and operation of the HD
camera. Prior to installation and usage, please read the manual thoroughly.
Warning
Warning
Warning
Warning
This product can be only used in specified range in order to avoid any
damage or danger;
● Don ’ t expose the camera to rain or moisture place .
● Don ’ t remove the cover to reduce the risk of electric shock. Refer servicing
to qualified personnel.
● Never operate the camera under unqualified temperature, humidity and
power supply;
● Please use the soft cloth to clean the camera. Use neuter cleanser if bad
smeared .Don ’ t use the strong or cleanser avoiding scuffing.
Notes
Notes
Notes
Notes
Electromagnetic fields at the specific frequency may affect the image quality.
All manuals and user guides at all-guides.com

CONTENTS
CONTENTS
CONTENTS
CONTENTS
1. Notes
.......................................................................................................
4
2. Accessories
............................................................................................
4
3. Fast Installation
.....................................................................................
5
4. Camera Highlights
................................................................................
7
5. Camera Specifications
.........................................................................
7
6. Camera Interface Explanation
............................................................
8
7. Remote Controller Explanation
..........................................................
9
8. Usage of IR Remote Controller
........................................................
11
9. RS-232C Interface (Pin Specs)
........................................................
14
10. Menu Setting
.....................................................................................
21
All manuals and user guides at all-guides.com

Notes
Electric
Electric
Electric
Electric Safety
Safety
Safety
Safety
Installation and operation must accord with electric safety standard
Caution
Caution
Caution
Caution to
to
to
to transport
transport
transport
transport
Avoid stress, vibration and soakage in transport, storage and installation.
Polarity
Polarity
Polarity
Polarity of
of
of
of power
power
power
power supply
supply
supply
supply
The power supply of the product is ± 12V
Polarity of the power supply drawing
Careful
Careful
Careful
Careful of
of
of
of installation
installation
installation
installation
Never move the camera by seizing the camera head. Don ’ t rotate camera head by hand;
otherwise, mechanical trouble will occur.
This series item must put on the smooth desk or platform, and it can not be installed
slantways;
If the camera is installed on TV or computer, the base can be fixed by four double-sided
adhesive trays.
Don ’ t apply in corrosive liquid, gas or solid environment to avoid the cover which is
made up of organic material. To make sure no obstacle in rotation range
Never power on before installation is not completed
Don
Don
Don
Don ’
’
’
’ t
t
t
t dispatch
dispatch
dispatch
dispatch discretionarily
discretionarily
discretionarily
discretionarily
We are not responsible for any unauthorized modification or dismantling.
Accessories
Accessories
Accessories
Accessories
When you open the box, check that all the supplied accessories are included:
Camera ………………………… 1
Power adapter ………………… 1
Power cable …………………… .1
RS232 cable …………………… .1
Remote controller ……………… 1
User manual …………………… 1
Double-side glue shim ……… ... 4
All manuals and user guides at all-guides.com

Fast
Fast
Fast
Fast Installation
Installation
Installation
Installation
1. Please check the connection before turning on the power.
2. Bottom Dial Switch Setting
Set the two switches 【ON 】.It is the normal working mode.
SW2-2 SW2-
1
Instructions
1 OFF OFF Undefined
2 ON OFF Updating mode
3 OFF ON Debugging mode
4 ON ON Working mode
All manuals and user guides at all-guides.com

3. The Rotary Switch Setting
The choice for 16 rotary switch video formats
Dial-up
0 1080P60
1 1080P50
2 1080I60
3 1080I50
4 720P60
5 720P50
6 1080P30
7 1080P25
8 --------
9 --------
A --------
B --------
C --------
D --------
E --------
F
Display the video format set on the menu
Note: Restart the camera after switching the dial code.
4. When the power supply switch is “ 【on 】” , the indicator light is open (red color)
5, Camera initializes after powering on: horizontally turn left to the limit position, vertically
turn to the bottom; finally both horizontally and vertically turn to the middle position. The
motor stops running, and initialization is completed.(Note: If the power-on mode is opened
and saved preset position 0 or 1, then the pan/tilt will be set to 0 or 1 preset position)
6. Factory Default : entry OSD menu by pressing the menu key of remote controller,
【MENU 】-> 【RESET 】-> 【ALL RESET 】, moving the left/right key to select 【Yes 】 ，
then confirm by 【HOME 】key .
RESET
RESET
RESET
RESET
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
SYS.
SYS.
SYS.
SYS. RESET
RESET
RESET
RESET NO
NO
NO
NO
CAM.
CAM.
CAM.
CAM. RESET
RESET
RESET
RESET NO
NO
NO
NO
P
P
P
P T.
T.
T.
T. RESET
RESET
RESET
RESET NO
NO
NO
NO
ALL.
ALL.
ALL.
ALL. RESET
RESET
RESET
RESET NO
NO
NO
NO
BACK
BACK
BACK
BACK
／ＭＥＮＵ
All manuals and user guides at all-guides.com
all-guides.com

Camera
Camera
Camera
Camera Highlights
Highlights
Highlights
Highlights
1. Equipped with modern appearance and 12 X HD CMOS sensor, delivering vivid images.
2. Support DVI interface (inclding YPbPr, VGA and HDMI signal), HD-SDI interface and
CVBS interface (for options) .
3. IR remote controller signal transparent transmission function: camera can receive both
its own remote controller signal and the one from terminal equipment, by transmitting the
signal through VISCA IN to terminal equipment IR receiver.
Camera
Camera
Camera
Camera Specifications
Specifications
Specifications
Specifications
1. V ideo format : 1080P60/50 , 1080P30/25 , 1080I60/50 , 720P60/50
2. Output Interface: DVI interface (including YPbPr, VGA and HDMI signal), HD-SDI
interface and CVBS interface (for selections) .
3. Image Sensor : 1/2.8 inch 2 Megapixel (1920*1080)HD CMOS Sensor
4.Focus : f 3.9 ～46.1mm (12X) ，F1.8 – 2.8 , angle of view : 70 ° ( near )-6.3 ° ( far )
5. Rotation: ± 170 ° for pan rotation, and -30 ° ~+90 ° for tilt rotation, support upside down
installation.
6. The Control speed: 0.1 ° -150 ° /sec for pan rotation, 0.1 ° -80 ° /sec for tilt rotation.
7. Preset position NO. : 10 preset positions (can reach to 255 by serial command),
precision error less than 0.2 ° .
8. Support auto/ manual white balance, auto/manual exposure (iris, shuttle),
auto/manual/OnePush focus
9. Support WDR technical: performance ≥ 50 dB,
10.Control Signal interface : 8 pin mini DIN, RS232 ，VISCA/Pelco-D/Pelco-P
11. Power interface: HEC3800 p ower jack, Power supply adapter: DC12V/2.5A,
12. Max Consumption: 12W
13. Working temperature: -5 ℃to +45 ℃
14. Storage temperature:-20 ℃to +60 ℃
15. Weight: 2.0kg
All manuals and user guides at all-guides.com

Camera
Camera
Camera
Camera Interface
Interface
Interface
Interface Explanation
Explanation
Explanation
Explanation
1.Camera lens
2.Camera base
3. .Remote Controller Receiver light
4 .Bottom dial Switch
5. Tripod screw hole
6 .Installation Orientation Hole
7 .Rotary Switch : video format optional
8 .RS232 controller serial interface (input )
9 .RS232 controller serial interface (output )
1 0 .CVB interface (for selection)
1 1 .HD-SDI interface
1 2 .DVI-I interface (including YPbPr ,HDMIHD Digital Output and VGA interface) .
1 3 .DC12V Input Power Supply Jack
1 4 .Power indicator light(red)
Dimension:
Dimension:
Dimension:
Dimension:
All manuals and user guides at all-guides.com

Remote
Remote
Remote
Remote Controller
Controller
Controller
Controller Explanation
Explanation
Explanation
Explanation
Definition
Definition
Definition
Definition of
of
of
of IR
IR
IR
IR controller
controller
controller
controller
0
0
0
0、Standby
Standby
Standby
Standby key
key
key
key
After pressing the standby key, the camera
will step into standby mode. Press again, the
camera will open again. (Note: Standby mode
power consumption is about half of the normal
mode)
1
1
1
1、Number
Number
Number
Number key
key
key
key
Setting or locating presets
2
2
2
2、*
*
*
* key
key
key
key
Key combination use
3
3
3
3、Set
Set
Set
Set preset
preset
preset
preset key:
key:
key:
key:
Set preset ：
Set preset key + 0-9 number key ：
Clear preset key ：
Clear preset key + 0-9 number key
or ：＃ +＃+＃： Clear all the presets
4
4
4
4、BLC
BLC
BLC
BLC control
control
control
control key
key
key
key
BLC ON ：open black light compensation （only
work when exposure mode setting is Auto ）
BLC OFF ：close black light compensation
（Only available in the exposure mode
effective for Auto ）
5
5
5
5、Focus
Focus
Focus
Focus control
control
control
control key
key
key
key
Focus ＋： Focus length far from near
Focus －： Focus length near from far
Auto focus ：The camera focus mode is auto
Manual focus ：The camera focus mode is manual
6
6
6
6、Camera
Camera
Camera
Camera address
address
address
address selection
selection
selection
selection
Select the camera which wants to be controlled
7
7
7
7、#
#
#
# key
key
key
key
8
8
8
8、pan/tilt
pan/tilt
pan/tilt
pan/tilt control
control
control
control key
key
key
key
Press key ：Up
All manuals and user guides at all-guides.com

Press key ：Down
Press key ：Left
Press key ：Right
“ HOME ” key: Return to the middle position
9
9
9
9、Menu
Menu
Menu
Menu setting
setting
setting
setting
Open or close the OSD menu
10
10
10
10 、Zoom
Zoom
Zoom
Zoom Control
Control
Control
Control key
key
key
key
zoom ＋： Lens near
zoom －： Lens far
11.
11.
11.
11. Camera
Camera
Camera
Camera IR
IR
IR
IR remote
remote
remote
remote control
control
control
control address
address
address
address selection
selection
selection
selection
【*】+【＃】 +【F1 】 ： Camera Address No.1
【*】+【＃】 +【F2 】 ： Camera Address No. 2
【*】+【＃】 +【F3 】 ： Camera Address No. 3
【*】+【＃】 +【F4 】 ： Camera Address No. 4
Usage
Usage
Usage
Usage of
of
of
of IR
IR
IR
IR Remote
Remote
Remote
Remote Controller
Controller
Controller
Controller
Finishing initialization, it can receive and execute the IR commands. Users can control
the pan/tilt/zoom, setting and running preset positions via the IR remote controller.
Key Instruction ：
1、In this instruction, “ press the key ” means a click rather than a long-press, and a
special note will be given if a long-press for more than one second is required.
2、When a key-combination is required, do it in sequence. For example, “ 【*】+【# 】
+【F1 】” means press “ 【*】” first and then press “ 【#】” and press “ 【F1 】” at last.
1.
1.
1.
1. Pan/Tilt
Pan/Tilt
Pan/Tilt
Pan/Tilt Control
Control
Control
Control
All manuals and user guides at all-guides.com

Up: press
Down: press
Left: press
Right: press
Back to middle position ：press “ 【HOME 】”
Press and hold the up/down/left/right key, the pan/tilt will keep running, from slow to fast,
until it run s to the endpoint; the pan/tilt running stops as soon as the key is released.
2.
2.
2.
2. Zoom
Zoom
Zoom
Zoom Control
Control
Control
Control
ZOOM OUT: press “ ZOOM “ key
ZOOM IN: press “ ZOOM ” key
Press and hold the key, the camera will keep zooming in or zooming out and stops as
soon as the key is released.
3.
3.
3.
3. Focus
Focus
Focus
Focus Control
Control
Control
Control
Focus (far) ：Press ” 【focus+ 】” key
Focus (near) ：Press “ 【focus- 】“ key
Auto Focus: Press " 【auto 】"
Manual Focus: Press " 【manual 】"
Press and hold the key, the action of focus continues and stops as soon as the key is
released.
All manuals and user guides at all-guides.com
all-guides.com

4.
4.
4.
4. BLC
BLC
BLC
BLC Setting
Setting
Setting
Setting
BLC ON / OFF: not support
5.
5.
5.
5. Presets
Presets
Presets
Presets setting
setting
setting
setting
1、Preset setting : to set a preset position, the users should press the “ 【SET
PRESET 】” key first and then press the number key 0-9 to set a relative preset, 10
preset positions in total are available.
2、Preset clearing : to clear a preset position, the user can press the “ 【CLEAR
PRESET 】” key first and then press the number key 0-9 to clear the relative preset;
Note : press the “ 【#】” key three times continually to cancel all the presets.
6.
6.
6.
6. Preset
Preset
Preset
Preset Running
Running
Running
Running
Press a number key 0-9 directly to run a relative preset.
Note:
Note:
Note:
Note: Action in vain if a relative preset position is not existed.
7.
7.
7.
7. Camera
Camera
Camera
Camera Selection
Selection
Selection
Selection
Select the camera address to control.
All manuals and user guides at all-guides.com

8.
8.
8.
8. Camera
Camera
Camera
Camera Remote
Remote
Remote
Remote Controller
Controller
Controller
Controller Address
Address
Address
Address Setting
Setting
Setting
Setting
【*】+【＃】 +【F1 】 ： Camera Address No.1
【*】+【＃】 +【F2 】 ： Camera Address No. 2
【*】+【＃】 +【F3 】 ： Camera Address No. 3
【*】+【＃】 +【F4 】 ： Camera Address No. 4
9.
9.
9.
9. Left
Left
Left
Left and
and
and
and Right
Right
Right
Right Scan
Scan
Scan
Scan Setting
Setting
Setting
Setting
【*】+【F4 】+【*】 ： Start the left and right scan mode
【*】+【F4 】+【左 】 ： Set the scan of left limit
【*】+【F4 】+【右 】 ： Set the scan of left right
【*】+【F4 】+【HOME 】 ： Clear the scan of the left and right limits
RS-232C
RS-232C
RS-232C
RS-232C Interface
Interface
Interface
Interface (Pin
(Pin
(Pin
(Pin Specs)
Specs)
Specs)
Specs)
All manuals and user guides at all-guides.com

VISCA
VISCA
VISCA
VISCA OUT
OUT
OUT
OUT Function
Function
Function
Function
VISCA
VISCA
VISCA
VISCA OUT
OUT
OUT
OUT Function
Function
Function
Function
COM
COM
COM
COM control
control
control
control
In the normal working condition, the camera can be controlled via the RS-232C/ RS485
command (VISCA IN). The parameter of the RS232C COM is as follows:
Baud Rate ：2400/4800/9600/115200 Bit/S
Start bit ：1bit;
Data bit: 8bit;
Stop bit: 1bit;
Code: None
Powering on, the camera runs to the down left, and then back to the middle with the
farthest zoom rate in the auto focus and the auto exposure mode. Finishing the
unitization, the camera moves to the preset no.0 or no.1 if it ’ s saved. Now, the camera
can be controlled by the serial command.
All manuals and user guides at all-guides.com

VISCA
VISCA
VISCA
VISCA Protocol
Protocol
Protocol
Protocol
Part1.
Part1.
Part1.
Part1. Camera
Camera
Camera
Camera Return
Return
Return
Return Command
Command
Command
Command
z = Camera Address + 8
Part
Part
Part
Part 2
2
2
2 Controlling
Controlling
Controlling
Controlling Command
Command
Command
Command
Command
Command
Command
Command Function
Function
Function
Function Command
Command
Command
Command Packet
Packet
Packet
Packet Note
Note
Note
Note
AddressSet Broadcast 88 30 01 FF Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
CommandCancel 8x 21 FF
CAM_Power
On 8x 01 04 00 02 FF
Power ON/OFFOff 8x 01 04 00 03 FF
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF
p = 0(low) - 7(high)Wide(Variable) 8x 01 04 07 3p FF
Direct 8x 01 04 47 0p 0q 0r 0s FF pqrs: Zoom Position
CAM_Focus
Stop 8x 01 04 08 00 FF
Far(Standard) 8x 01 04 08 02 FF
Near(Standard) 8x 01 04 08 03 FF
Direct 8x 01 04 48 0p 0q 0r 0s FF pqrs: Focus Position
One P u sh AF 8x 01 04 1 8 0 1 FF
CAM_ZoomFocus Direct
8x 01 04 47 0p 0q 0r 0s
0t 0u 0v 0w FF
pqrs: Zoom Position
tuvw: Focus Position
CAM_WB
Auto 8x 01 04 35 00 FF Normal Auto
Indoor 8x 01 04 35 01 FF
Outdoor 8x 01 04 35 02 FF
OnePush 8x 01 04 35 03 FF
Manual 8x 01 04 35 05 FF
CAM_RGain
Reset 8x 01 04 03 00 FF
Manual Control of R GainUp 8x 01 04 03 02 FF
Down 8x 01 04 03 03 FF
Ack/Completion
Ack/Completion
Ack/Completion
Ack/Completion Message
Message
Message
Message
Command
Command
Command
Command Packet
Packet
Packet
Packet Note
Note
Note
Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
Error
Error
Error
Error Messages
Messages
Messages
Messages
Command
Command
Command
Command Packet
Packet
Packet
Packet Note
Note
Note
Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a
command with illegal command parameters is accepted
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due to current
conditions. For example, when commands controlling the focus
manually are received during auto focus.
All manuals and user guides at all-guides.com

Command
Command
Command
Command Function
Function
Function
Function Command
Command
Command
Command Packet
Packet
Packet
Packet Note
Note
Note
Note
Direct 8x 01 04 43 00 00 0p 0q FF pq: R Gain
CAM_Bgain
Reset 8x 01 04 04 00 FF
Manual Control of B GainUp 8x 01 04 04 02 FF
Down 8x 01 04 04 03 FF
Direct 8x 01 04 44 00 00 0p 0q FF pq: B Gain
CAM_AE
Full Auto 8x 01 04 39 00 FF Automatic Exposure mode
Manual 8x 01 04 39 03 FF Manual Control mode
Shutter priority 8x 01 04 39 0A FF Shutter Priority Automatic Exposure mode
Iris priority 8x 01 04 39 0B FF Iris Priority Automatic Exposure mode
Bright 8x 01 04 39 0D FF B right mode(Manual control)
CAM_Shutter
Reset 8x 01 04 0A 00 FF
Shutter SettingUp 8x 01 04 0A 02 FF
Down 8x 01 04 0A 03 FF
Direct 8x 01 04 4A 00 00 0p 0q FF pq: Shutter Position
CAM_Iris
Reset 8x 01 04 0B 00 FF
Iris SettingUp 8x 01 04 0B 02 FF
Down 8x 01 04 0B 03 FF
Direct 8x 01 04 4B 00 00 0p 0q FF pq: Iris Position
CAM_ Gain
Reset 8x 01 04 0C 00 FF
Gain SettingUp 8x 01 04 0C 02 FF
Down 8x 01 04 0C 03 FF
Direct 8x 01 04 0C 00 00 0p 0q FF pq: Gain Positon
CAM_ Bright
Reset 8x 01 04 0D 00 FF
Bright SettingUp 8x 01 04 0D 02 FF
Down 8x 01 04 0D 03 FF
Direct 8x 01 04 4D 00 00 0p 0q FF pq: Bright l Positon
CAM_ExpComp
On 8x 01 04 3E 02 FF
Exposure Compensation ON/OFFOff 8x 01 04 3E 03 FF
Reset 8x 01 04 0E 00 FF
Exposure Compensation Amount SettingUp 8x 01 04 0E 02 FF
Down 8x 01 04 0E 03 FF
Direct 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp Position
CAM_Aperture
Reset 8x 01 04 02 00 FF
Aperture ControlUp 8x 01 04 02 02 FF
Down 8x 01 04 02 03 FF
Direct 8x 01 04 42 00 00 0p 0q FF pq: Aperture Gain
CAM_Memory
Reset 8x 01 04 3F 00 0p FF
p: Memory Number(=0 to 127 )
Corresponds to 0 to 9 on the Remote
Commander
Set 8x 01 04 3F 01 0p FF
Recall 8x 01 04 3F 02 0p FF
CAM_LR_Reverse
On 8x 01 04 61 02 FF
Image Flip Horizontal ON/OFFOff 8x 01 04 61 03 FF
CAM_PictureFlip
On 8x 01 04 66 02 FF
Image Flip Vertical ON/OFFOff 8x 01 04 66 03 FF
VideoSystem Set 8 x 0 1 0 6 35 00 0p FF
P : 0~7 Video format
0:1080P60
1:1080P50
2:1080i60
3:1080i50
All manuals and user guides at all-guides.com
all-guides.com

Command
Command
Command
Command Function
Function
Function
Function Command
Command
Command
Command Packet
Packet
Packet
Packet Note
Note
Note
Note
4:720P60
5:720P50
6:1080P30
7:1080P25
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF)
SYS_Menu OFF 8x 01 0 6 0 6 03 FF Turn off the menu
IR_Receive
On 8x 01 06 08 02 FF
IR(remote commander)receive ON/OFFOff 8x 01 06 08 03 FF
On/Off 8x 01 06 08 10 FF
IR_ReceiveReturn
On 8x 01 7D 01 03 00 00 FF
IR(remote commander)receive message via the
VISCA communication ON/OFFOff 8x 01 7D 01 13 00 00 FF
Pan_tiltDrive
Up 8x 01 06 01 VV WW 03 01 FF
VV: Pan speed 0x01 (low speed) to 0x18 (high
speed)
WW: Tilt speed 0x01 (low speed) to 0x14
(high speed)
YYYY: Pan Position(TBD)
ZZZZ: Tilt Position(TBD)
Down 8x 01 06 01 VV WW 03 02 FF
Left 8x 01 06 01 VV WW 01 03 FF
Right 8x 01 06 01 VV WW 02 03 FF
Upleft 8x 01 06 01 VV WW 01 01 FF
Upright 8x 01 06 01 VV WW 02 01 FF
DownLeft 8x 01 06 01 VV WW 01 02 FF
DownRight 8x 01 06 01 VV WW 02 02 FF
Stop 8x 01 06 01 VV WW 03 03 FF
AbsolutePosition
8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
RelativePosition
8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
Home 8x 01 06 04 FF
Reset 8x 01 06 05 FF
Pan-tiltLimitSet
Set
8x 01 06 0 7 00 0 W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
W:1 UpRight 0:DownLeft
YYYY: Pan Limit Position(TBD)
ZZZZ: Tilt Limit Position(TBD)Clear
8x 01 06 0 7 01 0 W
07 0 F 0 F 0 F 0 7 0 F 0 F 0 F FF
Part3
Part3
Part3
Part3 Checking
Checking
Checking
Checking Command
Command
Command
Command
Command
Command
Command
Command Command
Command
Command
Command Packet
Packet
Packet
Packet Return
Return
Return
Return Packet
Packet
Packet
Packet Note
Note
Note
Note
CAM_PowerInq 8x 09 04 00 FF
y0 50 02 FF On
y0 50 03 FF Off(Standby)
CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position
CAM_FocusModeInq 8x 09 04 38 FF
y0 50 02 FF Auto Focus
y0 50 03 FF Manual Focus
CAM_FocusPosInq 8x 09 04 48 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Position
CAM_WBModeInq 8x 09 04 35 FF
y0 50 00 FF Auto
y0 50 01 FF Indoor mode
y0 50 02 FF Outdoor mode
y0 50 03 FF OnePush mode
y0 50 0 4 FF ATW
y0 50 05 FF Manual
CAM_RGainInq 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: R Gain
CAM_BGainInq 8x 09 04 44 FF y0 50 00 00 0p 0q FF pq: B Gain
CAM_AEModeInq 8x 09 04 39 FF
y0 50 00 FF Full Auto
y0 50 03 FF Manual
y0 50 0A FF Shutter priority
y0 50 0B FF Iris priority
y0 50 0D FF Bright
All manuals and user guides at all-guides.com

Note
Note
Note
Note :
:
:
:【x】means the camera address you want to control , 【y】=【x + 8 】.
Pelco-D
Pelco-D
Pelco-D
Pelco-D Protocol
Protocol
Protocol
Protocol
CAM_ShutterPosInq 8x 09 04 4A FF y0 50 00 00 0p 0q FF pq: Shutter Position
CAM_IrisPosInq 8x 09 04 4B FF y0 50 00 00 0p 0q FF pq: Iris Position
CAM_ GainPosi Inq 8x 09 04 4C FF y0 50 00 00 0p 0q FF pq: Gain Position
CAM_ BrightPosi Inq 8x 09 04 4D FF y0 50 00 00 0p 0q FF pq: Bright Position
CAM_ExpCompModeInq 8x 09 04 3E FF y0 50 02 FF On
y0 50 03 FF Off
CAM_ExpCompPosInq 8x 09 04 4E FF y0 50 00 00 0p 0q FF pq: ExpComp Position
CAM_ApertureInq 8x 09 04 42 FF y0 50 00 00 0p 0q FF pq: Aperture Gain
CAM_MemoryInq 8x 09 04 3F FF y0 50 p p FF p p: Memory number last operated.
SYS_MenuModeInq 8x 09 06 06 FF y0 50 02 FF On
y0 50 03 FF Off
CAM_LR_ReverseInq 8x 09 04 61 FF y0 50 02 FF On
y0 50 03 FF Off
CAM_PictureFlipInq 8x 09 04 66 FF y0 50 02 FF On
y0 50 03 FF Off
CAM_IDInq 8x 09 04 22 FF y0 50 0p 0q 0r 0s FF pqrs: Camera ID
CAM_VersionInq 8x 09 00 02 FF
y0 50 ab cd
mn pq rs tu vw FF
VideoSystemInq 8x 09 06 23 FF y0 50 0 p FF
P : 0~7 Video format
0:1080P60
1:1080P50
2:1080i60
3:1080i50
4:720P60
5:720P50
6:1080P30
7:1080P25
IR_Receive 8x 09 06 08 FF
y0 50 02 FF On
y0 50 03 FF Off
IR_ReceiveReturn
y0 07 7D 01 04 00 FF Power ON/OFF
y0 07 7D 01 04 07 FF Zoom tele/wide
y0 07 7D 01 04 38 FF AF On/Off
y0 07 7D 01 04 33 FF CAM_Backlight
y0 07 7D 01 04 3F FF CAM_Memory
y0 07 7D 01 06 01 FF Pan_tiltDrive
Pan-tiltMaxSpeedInq 8x 09 06 11 FF y0 50 ww zz FF
ww: Pan Max Speed
zz: Tilt Max Speed
Pan-tiltPosInq 8x 09 06 12 FF
y0 50 0w 0w 0w 0w
0z 0z 0z 0z FF
wwww: Pan Position
zzzz: Tilt Position
Function
Function
Function
Function Byte1
Byte1
Byte1
Byte1 Byte2
Byte2
Byte2
Byte2 Byte3
Byte3
Byte3
Byte3 Byte4
Byte4
Byte4
Byte4 Byte5
Byte5
Byte5
Byte5 Byte6
Byte6
Byte6
Byte6 Byte7
Byte7
Byte7
Byte7
Up 0xFF Address 0x00 0x08 Pan Speed Tilt Speed SUM
Down 0xFF Address 0x00 0x10 Pan Speed Tilt Speed SUM
Left 0xFF Address 0x00 0x04 Pan Speed Tilt Speed SUM
Right 0xFF Address 0x00 0x02 Pan Speed Tilt Speed SUM
Upleft 0xFF Address 0x00 0x 0C Pan Speed Tilt Speed SUM
Upright 0xFF Address 0x00 0x 0A Pan Speed Tilt Speed SUM
DownLeft 0xFF Address 0x00 0x 14 Pan Speed Tilt Speed SUM
DownRight 0xFF Address 0x00 0x 12 Pan Speed Tilt Speed SUM
Zoom In 0xFF Address 0x00 0x20 0x00 0x00 SUM
Zoom Out 0xFF Address 0x00 0x40 0x00 0x00 SUM
All manuals and user guides at all-guides.com

Pelco-P
Pelco-P
Pelco-P
Pelco-P Protocol
Protocol
Protocol
Protocol
Focus Far 0xFF Address 0x00 0x80 0x00 0x00 SUM
Focus Near 0xFF Address 0x01 0x00 0x00 0x00 SUM
Set Preset 0xFF Address 0x00 0x03 0x00 Preset ID SUM
Clear Preset 0xFF Address 0x00 0x05 0x00 Preset ID SUM
Call Preset 0xFF Address 0x00 0x07 0x00 Preset ID SUM
Query Pan Position 0xFF Address 0x00 0x51 0x00 0x00 SUM
Query Pan Position Response 0xFF Address 0x00 0x59
Value High
Byte
Value Low
Byte
SUM
Query Tilt Position 0xFF Address 0x00 0x53 0x00 0x00 SUM
Query Tilt Position Response 0xFF Address 0x00 0x5B
Value High
Byte
Value Low
Byte
SUM
Query Zoom Position 0xFF Address 0x00 0x55 0x00 0x00 SUM
Query Zoom Position Response 0xFF Address 0x00 0x5D
Value High
Byte
Value Low
Byte
SUM
Function
Function
Function
Function Byte1
Byte1
Byte1
Byte1 Byte2
Byte2
Byte2
Byte2 Byte3
Byte3
Byte3
Byte3 Byte4
Byte4
Byte4
Byte4 Byte5
Byte5
Byte5
Byte5 Byte6
Byte6
Byte6
Byte6 Byte7
Byte7
Byte7
Byte7 Byte8
Byte8
Byte8
Byte8
Up 0xA0 Address 0x00 0x08 Pan Speed Tilt Speed 0xAF XOR
Down 0xA0 Address 0x00 0x10 Pan Speed Tilt Speed 0xAF XOR
Left 0xA0 Address 0x00 0x04 Pan Speed Tilt Speed 0xAF XOR
Right 0xA0 Address 0x00 0x02 Pan Speed Tilt Speed 0xAF XOR
Upleft 0xA0 Address 0x00 0x 0C Pan Speed Tilt Speed 0xAF XOR
Upright 0xA0 Address 0x00 0x 0A Pan Speed Tilt Speed 0xAF XOR
DownLeft 0xA0 Address 0x00 0x 14 Pan Speed Tilt Speed 0xAF XOR
DownRight 0xA0 Address 0x00 0x 12 Pan Speed Tilt Speed 0xAF XOR
Zoom In 0xA0 Address 0x00 0x20 0x00 0x00 0xAF XOR
Zoom Out 0xA0 Address 0x00 0x40 0x00 0x00 0xAF XOR
Focus Far 0xA0 Address 0x00 0x80 0x00 0x00 0xAF XOR
Focus Near 0xA0 Address 0x01 0x00 0x00 0x00 0xAF XOR
Set Preset 0xA0 Address 0x00 0x03 0x00 Preset ID 0xAF XOR
Clear Preset 0xA0 Address 0x00 0x05 0x00 Preset ID 0xAF XOR
Call Preset 0xA0 Address 0x00 0x07 0x00 Preset ID 0xAF XOR
Query Pan Position 0xA0 Address 0x00 0x51 0x00 0x00 0xAF XOR
Query Pan Position Response 0xA0 Address 0x00 0x59
Value High
Byte
Value Low
Byte
0xAF XOR
Query Tilt Position 0xA0 Address 0x00 0x53 0x00 0x00 0xAF XOR
Query Tilt Position Response 0xA0 Address 0x00 0x5B
Value High
Byte
Value Low
Byte
0xAF XOR
Query Zoom Position 0xA0 Address 0x00 0x55 0x00 0x00 0xAF XOR
Query Zoom Position
Response
0xA0 Address 0x00 0x5D
Value High
Byte
Value Low
Byte
0xAF XOR
All manuals and user guides at all-guides.com

Menu
Menu
Menu
Menu Setting
Setting
Setting
Setting
1.
1.
1.
1. Main
Main
Main
Main Menu
Menu
Menu
Menu
In normal working mode, press 【MENU 】key to display the menu, using scroll arrow to
point at or highlight the selected items.
LANGUAGE
LANGUAGE
LANGUAGE
LANGUAGE : Language setting, Chinese / English
SYSTEM
SYSTEM
SYSTEM
SYSTEM OPTION
OPTION
OPTION
OPTION ：System setting
CAMERA
CAMERA
CAMERA
CAMERA OPTION
OPTION
OPTION
OPTION ：Camera setting
PT
PT
PT
PT OPTION
OPTION
OPTION
OPTION ：Pan tilt setting
V.
V.
V.
V. FORMAT:
FORMAT:
FORMAT:
FORMAT: V ideo format setting
RESET
RESET
RESET
RESET ：Reset setting
HELP
HELP
HELP
HELP ：For help
VGA
VGA
VGA
VGA OUTPUT
OUTPUT
OUTPUT
OUTPUT ：ON / OFF VGA in the P video format, No VGA in the I video format
Note: Component signal is available only when VGA is off.
2.
2.
2.
2. SYSTEM
SYSTEM
SYSTEM
SYSTEM OPTION
OPTION
OPTION
OPTION
Move the pointer to the (SYSTEM SET) in the Main Menu, click the 【HOME 】and enter the
(SYSTEM SET) as follow,
All manuals and user guides at all-guides.com