Mistral Frosty the Snowman MAS10 User manual

MAS10
Frosty the Snowman®
Ice Shaver

For Your Safety
Read all instructions carefully, even if you feel
that you are familiar with the appliance.
• To protect against the risk of electric shock,
DO NOT IMMERSE the appliance, cord set or
plug in water or an other liquid. Detachable
parts ma be washed separatel .
• This appliance is not intended for use b children
or infirm persons without supervision. Never
leave an appliance unattended when in use.
• Children should be prevented from pla ing with
the appliance.
•
Operate on a dr level surface. Operating on sinks ,
drainboards or uneven surfaces must be avoided.
• Switch off the power outlet and remove the plug
when the appliance is not in use; before assembling
or disassembling parts; and before cleaning. To
unplug, grasp the plug and pull from the power
outlet. Never pull the cord.
• Avoid contact with moving parts. Keep hands,
hair and clothing, as well as spatulas and other
utensils, awa during operation to prevent injur
and/or damage to the appliance.
• Do not operate an appliance with a damaged
cord or plug; after the appliance malfunctions;
or if it has been dropped or damaged in an
manner.
• The use of attachments or accessories not
recommended or sold b the manufacturer
can cause fire, electric shock or injur .
• Do not use outdoors.
• Store the unit indoors in a dr location.
• Do not allow the cord to hang over the edge
of a table or counter, or touch hot surfaces.
• Do not operate or place an part of this appliance
on or near an hot surfaces (such as a gas or
electric burner, or in a heated oven).
• Do not misuse the cord. Never carr the
appliance b the cord or pull to disconnect it
from the outlet. Instead, grasp the plug and pull
to disconnect.
• D not use an product for an thing other than
its intended use. This product is intended for
household use onl .
• This appliance is intended to be plugged in a
240v outlet onl .
• Do not attempt to repair, disassemble or modif
the appliance. There are no user-serviceable parts
.
• Care should be taken when handling this
appliance as it contains a sharp mixing blade.
• Do not use this appliance with an extension lead.
•
DO NOT MOVE this appliance when it is in operation .
•
Ensure the packaging of this appliance is disposed
of properl . Keep plastic bags awa from babies
and children.
• NEVER reach for an appliance that has fallen into
water. Switch off the power outlet and unplug
the appliance immediatel .
OMPULSORY WARNING
If the suppl cord is damaged, it must be replaced b
the manufacturer or its service agent, or a similarl
qualified person, in order to avoid a hazard.
This product has not been designed for an uses
other than those specified in this booklet.
Save These Instructions
2
Important Safeguards
When using electrical appliances, in order to reduce the risk of fire, electric shock and/or injury,
these basic safety precautions should always be followed:

3
Features of your Frosty the Snowman®
4 ×S rup Bottles
4 ×Ice Moulds and Lids
10 ×Snow Cone Cups
Ice Chamber
Motor Housing

Congratulations on the purchase of our new
Frost the Snowman®.
You can now make ic snow drinks in minutes for
ou and our friends. Frost the Snowman® is also
great for making impressive iced cocktails and
desserts. With unique, refillable s rup bottles and
snow cone cups, ou can start to create ic snow
drinks immediatel .
Before first using our new Frost the Snowman®,
it is most important that ou read and follow the
instructions in this use and care booklet, even if ou
feel ou are familiar with this t pe of appliance.
Your attention is drawn particularl to the section
dealing with IMPORTANT SAFEGUARDS. Find a safe
and convenient place to keep this booklet hand for
future reference.
This appliance has been designed to operate from a
standard domestic power outlet. It is not intended
for industrial or commercial use.
Before first use
Carefull unpack Frost the Snowman® and remove
all packaging materials.
Wash all detachable parts in warm soap water and
dr thoroughl . These parts are not dishwasher safe.
Use a damp cloth to clean the exterior of the motor
unit.
Note: Do not immerse the motor housing in
water or any other liquid.
Ice blocks
Fill the ice moulds with cold water until the are
almost full and secure the lids. Place them horizontall
in the freezer and allow them time to freeze
completel .
Note: Do not put regular ice cubes into Frosty
the Snowman®. You must use the specially
shaped ice moulds provided.
Making a frosty snow drink
Remove the motor housing from the ice chamber.
Remove an ice block from an ice mould and place
the ice block flat side down in the ice chamber. Onl
remove the required ice moulds from the freezer to
avoid ice blocks melting before use.
Note: Frosty the Snowman® will only shave one
block at a time.
Fill the s rup bottles with flavouring of our choice
(cordial is recommended).
Place a cup under the ice chamber to catch the snow
as it falls. You will be surprised how much snow one
ice block can create!
Place the motor housing on top of the ice chamber.
Press down the top of Frost the Snowman® and it
will automaticall begin producing snow. Press down
harder if snow is not produced.
Note: Two or three millimeters of ice will be left
in the ice chamber after each ice block is shaved.
Remove it before inserting a new ice block.
Serve with a squirt of flavouring from the s rup bottles.
Note: Do not run Frosty the Snowman®
continuously for more than 5 minutes at a
time, as doing so will overheat the motor
and reduce the life of the appliance.
4
Getting to know your
Frosty the Snowman®
How to use your
Frosty the Snowman®

5
How to make a frosty fruit drink
Blend or process an fruit ou like (such as strawberries ,
bananas, apples, watermelon etc) until it is smooth.
Strain.
Pour the fruit puree into the ice moulds and freeze
for 16 hours or until completel frozen.
Remove the frozen fruit ice blocks from the ice
mounds, place them into the ice chamber flat side
down and begin shaving.
Experiment with different fruit combinations for
delicious and health treats.
Garnish with fruit accompaniments or top with
s rup or liquor.
How to make a frosty milk drink
Pour an milk based drink (such as iced coffee,
malted milk or strawberr milk) into the ice moulds
and freeze for 16 hours or until completel frozen.
Remove the frozen milk ice blocks from the ice
mounds, place them into the ice chamber flat side
down and begin shaving.
Serve with our favourite fruit toppings or eat all on
its own.
How to make a frosty soft drink
Pour water into the ice moulds and freeze for 16 hours
or until completel frozen.
Remove the ice blocks from the ice mounds, place
them into the ice chamber flat side down and begin
shaving.
Fill the s rup bottles with soft drink and add it as ou
shave the ice block.
Switch off and unplug Frost the Snowman® from
the power outlet.
Note: Do not place any part of Frosty the
Snowman® in the dishwasher.
Wipe the exterior of the motor housing with a soft
damp sponge or cloth. Dr thoroughl . Do not pour
water or an other liquid into the motor housing
or immerse the motor housing in water or an
other liquid.
The ice moulds and s rup bottles can be washed in
warm soap water.
Alwa s clean the unit after ever use.
are and leaning

Fruit freeze
2 bananas
11⁄2 cups shaved ice
2⁄3cup buttermilk
1⁄4cup sugar
Cut bananas into 2.5cm chunks.
Blend all ingredients, except for the shaved ice,
together in an electric blender until smooth.
Pour over shaved ice and serve immediatel ,
garnished with banana pieces.
Makes 3 serves.
Strawberry & banana health shake
1 cup orange juice
3 tablespoons non-fat powdered dr milk
1⁄4fresh banana
3⁄4cup strawberries
1⁄2cup shaved ice
Mint sprigs (for garnish)
Blend all ingredients, except for the shaved ice,
together in an electric blender until smooth.
Pour over shaved ice and serve immediatel ,
garnished with strawberries and mint sprigs.
Makes 4 serves.
Tropical fruit cooler
4 tablespoons pineapple juice
4 tablespoons orange juice
15ml coconut cream
11⁄2kiwi fruit, sliced, skin removed
1⁄2banana, cut into chunks
1 orange slice, skin removed
1 pineapple slice, hulled
4 strawberries
1⁄2cup shaved ice
Blend all ingredients together in an electric blender
until smooth.
Garnish with orange and pineapple slices.
Makes 1 serve.
inderella (non- alcoholic cocktail)
3 tablespoons orange juice
3 tablespoons pineapple juice
3 tablespoons lemon juice
1 tablespoon grenadine
1⁄2cup shaved ice
Add all ingredients except the shaved ice to a
cocktail shaker or a large screw top jar. Shake until
well blended, about 40 seconds and pour over
shaved ice.
6
Recipes

Notes
7

The benefits conferred b this warrant are in
addition to all implied warranties, other rights and
remedies in respect of the product which the
consumer has under the Trade Practices Act and
similar State and Territor Laws.
The original purchaser of this Mistral product
is provided with the following warrant , subject to
the following conditions.
Mistral International Pt Ltd warrant this product for
a period of 3 ears from the date of purchase for all
parts defective in workmanship or materials. The
product or defective parts will be replaced free of
charge.
WARRANTY ONDITIONS
1. This warrant is onl valid for appliances used
according to the manufacturer’s instructions.
2. This appliance must not be modified
or changed in an wa .
3. Connection must be to the voltage requirements
as specified in the ratings
label located on the product.
4. The manufacturer does not accept liabilit for
an direct or consequential damage, loss or
other expense arising from misuse or incorrect
installation and operation of the appliance.
5. Warrant will onl be given where proof of
purchase is provided, e.g. original invoice.
6. Not designed or warranted for industrial
or commercial use.
DO NOT SEND IN THIS WARRANTY
Fill out the following details and file with our
purchase invoice.
RETAIN & FILE WITH YOUR RE EIPT.
Your Purchase Receipt/Invoice is proof of date of
purchase. You must be able to present it at the place
of purchase to obtain a replacement or service
under warrant .
Mistral International Pt Ltd reserves the right to
discontinue items, modif designs and change
specifications without incurring obligation. Whilst
ever effort is made to ensure that descriptions,
specifications and other information in this
publication is correct, no warrant is given in
respect thereof and the compan shall not be liable
for an errors therein.
Purchased from:
Co. Name:
Address:
Date of Purchase:
NOTE: onsistent with our continuing product
development policy, improvements may have
been made which render the contents of this
package slightly different to that shown.
Cat. No. MAS10
Jul 2003
8
Warranty
Product of Mistral International Pty Ltd ABN 25 006 680 315
324 Frankston-Dandenong Road
Dandenong South, Victoria, Australia 3175
Telephone [phone] Facsimile 03 9212 1340
ustomer Service 1300 654 488
Internet Address: www.mistral.com.au
RINGGRIP (NZ) Pty Ltd ACN 006 771 922
PO Box 51317, Pakuranga, Auckland NZ
Telephone [phone] Facsimile 0800 328 238
Manufactured b Mistral International Pt Ltd
Mistral is a registered trademark of Mistral International Pt Ltd
© 2003 Mistral International Pt Ltd