Mitsubishi Electric MP-G10-AH User manual

INDUSTRIAL SEWING MACHINE
Attachment
MODEL
MP-G10-AH
TECHNICAL MANUAL
Label Holder Unit
A180E639P03

FOR SAFE USE
Before the installation, operation, and inspection for this product, read the “FOR SAFE USE” and the
technical manuals carefully. Also read the other technical manuals, “Sewing Machine Head”, “Control Unit”
and “Operation Panel” describing some instructions, which are not in this manual, and use the sewing
machine properly.
SAFETY INDICATIONS
CAUTION
Indicates that incorrect handling may cause hazardous conditions,
resulting in medium or slight personal injury or physical damage. Note that
C
AUTION level may lead to a serious consequence according to the
circumstances. Always follow the instructions of both levels because they
are important to personal safety.
CAUTION INDICATIONS
No. Caution indication Description
1
Precaution for sewing machine operation:
Indicates that removing the safety and operating
the sewing
machine for some other purposes with power-on are prohibited.
Please do not operate the sewing machine without
protective equipment such as a needle guard, an eye
guard, a belt cover or the others.
Please turn off the power switch when threading, changing
a needle and a bobbin, cleaning, and lubricating.
2
Caution for fingers injury:
Indicates a possibility of fingers (hands) injury in a certain
condition.
3
Caution for squeezing fingers:
Indicates a possibility of squeezing fingers in a certain condition.

1. Features
The pneumatic type label holder unit is an attachment dedicated for sewing on labels. The entire
periphery of the label can be sewn on while pressing down on the inside of the label.
Superimposed stitching or backstitching can be done at the start and end of stitching.
2. Specifications
Name
：MP-G10-AH (pneumatic type label holder unit)
Applicable model: ：PLK-G1010
Stitching range
：100(X) mm×80(Y) mm
Maximum speed ：2,300 rpm
Clamp UP position
：20 mm
Pressing operation ：
Use foot switch (2-pedal) normally provided with
the electronic sewing machine and the
expansion foot switch (1-pedal)
Drive source air
pressure Primary side ：0.5MPa (5kg/cm2) or more
Secondary side:
：0.4Mpa (4kg/cm2)
Trouble such as operation errors could occur if the secondary pressure is set too high.
Use within the range of 0.4MPa (4kg/cm2).
CAUTION
- 1 -

3. Configuration
★The Fig. numbers in the drawing correspond to the part numbers given in the following
explanations.
3.1 Clamp mechanism
- 2 -

3.1 Clamp mechanism (Parts list)
Fig
№
部品コード
Parts №
品名Description 数量
Amt. Req.
101 M91055020 ﾛｯｶｸｱﾅﾂｷﾄﾒﾈｼﾞ M4X4 Screw M4X4 4
102 MH10A0352 ｶﾗｰ Collar 2
103 M90519050 ﾅｲﾛﾝﾜｯｼｬ Nylon washer 4
104 M91109002 ﾋﾗﾈｼﾞ Screw 11/64(40)X7 2
105 M90421050 ｻﾞｶﾞﾈ 4 Washer 4 2
106 MH10K0950 ﾚﾊﾞｰ(S2L) Lever (S2L) 1
107 MH10K1950 ﾚﾊﾞｰ(S1) Lever (S1) 2
108 M90538060 ﾅｯｸﾙﾋﾟﾝ(L) Knuckle pin (L) 1
109 ME10P0434 ｴｱｼﾘﾝﾀﾞ Air cylinder 2
110 ME10P0352 ｶﾗｰ Collar 2
111 M93004021 ﾛｯｶｸｱﾅﾂｷﾎﾞﾙﾄ M3X5 Socket bolt M3X5 4
112 M90822060 ﾋﾟﾝ Pin 1
113 MH10A0308 ｵｻｴﾀﾞｲ Work holder arm 1
114 ME10H1601 ｱｸﾁｭｴｰﾀﾄﾘﾂｹｲﾀ Actuator plate 1
115 MH10H0601 ｼﾘﾝﾀﾞﾄﾘﾂｹｲﾀ Cylinder bracket 1
116 M94007017 ｾﾌﾃｨｿｹｯﾄ M4X12 Safety socket bolt M4X12 4
117 M90555060 ﾋﾟﾝ Pin 1
118 M94025017 ｾﾌﾃｨｿｹｯﾄ M4X25 Safety socket bolt M4X25 3
119 M90422050 ｺｻﾞｶﾞﾈ 4 Washer 4 6
120 MB61A1571 ｴﾙﾎﾞﾕﾆｵﾝ Air fitting 2
121 ME10H0170 ﾛｰﾀﾘｱｸﾁｭｴｰﾀ Rotary actuator 1
122 MY08H0571 ﾕﾆﾊﾞｰｻﾙｼﾞｮｲﾝﾄ Universal joint 1
123 M90548060 ﾅｯｸﾙﾋﾟﾝ(R) Knuckle pin (R) 1
124 ME10K2950 ﾚﾊﾞｰ(S2R) Lever (S2R) 1
126 M94019017 ｾﾌﾃｨｿｹｯﾄ M4X14 Safety socket bolt M4X14 6
127 MH10A6957 ｵｻｴｺﾃｲﾚｰｽ Fixed race 2
128 MH10A3957 ｵｻｴｲﾄﾞｳﾚｰｽ Movable race 2
129 MH10H0957 ｵｻｴｺﾃｲﾚｰｽ Fixed race 1
130 M94008070 ﾛｰﾗﾘﾃｰﾅ Roller retainer 4
131 M93003020 ﾛｯｶｸｱﾅﾂｷﾄﾒﾈｼﾞ M3X3 Screw M3X3 1
132 MS03A0352 ｶﾗｰ Collar 1
133 M90635017 ﾜｯｼｬ Washer 1
134 MH10H0697 ﾊﾝﾃﾝｼﾞｸﾀﾞｲ Flip-flop shaft bracket 1
135 M95005017 ｾﾌﾃｨｿｹｯﾄ M5X10 Safety socket bolt M5X10 4
136 ME10H0454 ﾊﾝﾃﾝｼﾞｸ Flip-flop shaft 1
137 MS02A1308 ﾅｶｵｻｴﾀﾞｲ Label plate mounting block 1
138 M90904012 ﾏﾙﾈｼﾞ 9/64(40)X6.2 Screw 9/64(40)X6.2 1
139 ME10H0476 ｽﾍﾟｰｻ Spacer 1
140 ME10H0257 ﾗﾍﾞﾙｵｻｴ Label holder plate 1
141 M90858004 P ｻﾗﾈｼﾞ M3X6 Screw M3X6 2
142 M94041021 ﾛｯｶｸｱﾅﾂｷﾎﾞﾀﾝﾎﾞﾙﾄ M4X6 Bolt M4X6 1
143 MH10A0196 ｲﾁｷﾞﾒｲﾀ Guide plate 1
144 MH10H0308 ｵｻｴﾄﾘﾂｹｲﾀ Clamp foot 1
145 M94005022 ﾛｯｶｸｱﾅﾂｷﾎﾞﾀﾝﾎﾞﾙﾄ M4X8 Bolt M4X8 2
146 MH10H0105 ｵｻｴ Clamp frame 1
147 MH10H0257 ｿﾄｵｻｴｲﾀ Work holder plate 1
148 M91303010 P ｻﾗﾈｼﾞ M3X5 Screw M3X5 10
- 3 -