MIUFLY EH15 User manual

1
MIUFLY Body Camera User Guide

2
TABLE OF CONTENTS
1. Introduction
Product Overview
Box contents
2. Technical Specifications
3. Features
4. Main Manu Optional Detail
5. Operation
6. Troubleshooting

3
1. Introduction
Product Overview
MIUFLY EH15 Body Camera is ruggedly designed to provides law
enforcement, security and emergency personnel with super Full HD 1296p
video recording capabilities, and one-button recording and activation. When
worn on the front of clothing, an ultra-wide 140°field-of-view lens
captures what happens in the field as accurate information for further
analysis. Featuring a 32GB (64GB/128GB) internal memory, pre-record
buffering, importance tagging, and integrated Infrared LEDS for night vision,
EH15 is equipped to perform in any conditions.
With full featured and adaptable operation, EH15 can record video and
audio simultaneously, or audio only for suspect interrogations and
victim/witness statements. EH15 is fully configurable and offers multiple
recording quality, super full HD 1296p video down to 720x480 resolution,
giving users the options to adjust the recording quality according to their
storage capabilities.
EH15 can also take up to 20 high-resolution snapshots, which, together with
video, can be viewed on backlit, 2 inch LCD color screen or on an HDTV
screen using a HDMI connector. Security protocols of the device are secure
to prevent accidental deletion of evidence or modification of system settings.
Video footage is also digitally watermarked with the user ID, time and date,
ensuring the authenticity of collected video of the event. The internal GPS
receiver provides automatic location tagging of video- and still-captures,
offering irrefutable substantiation of where and when the audio and video
were recorded.
Box contents
zMIUFLY Body Camera
zCharging Dock
zUSB Cable
zUSB Adaptor
z360 Degree Rotatable Clip
zUser Manual
zShould Clip
zCar Charger

4
2. Technical Specifications
Camera
Sensor 5MP CMOS
Wide Angle 140 degree wide angle lens
Video
Video Resolution 2560X1080 30p/ 2304x1296 30p/ 1920x1080 30p /1280x720 60p
/1280x720 30p / 848x480 60p
Video
Compression H.264/MPEG4
Audio High Quality Build-in Microphone
Audio Format WAV
Watermark User ID, Time and Date
Pre-record Support
Password
protection Administrator password to prevent video deletion
Video Section 3min/5min/10min/15min/30min/45min
Snap Shot
Image Max 32 Megapixels
Image Format JPEG
Burst 2/3/5/10/15/20 Snap Shots
Video/Image Review
LCD Screen 2.0in TFT-LCD High-Resolution Color Display
Audio Playback Yes
Video Output Not support
Video Transfer USB 2.0
General
GPS location Support
IR LED 4
IR LED switch Auto/manual
IR Distance 10 Meters
One Button
Recording Support One Button Record
Motion detection Auto/manual
Built-in Storage 32GB (64GB/128GB)
Working
Temperature -40～60 degrees Celsius
Storage
temperature -20～55 degrees Celsius
Dimension 3.54" x 2.17" x 1.10"
Weight 175g
Standard
Accessories
Charging dock, USB cable, Adapter, User Manual, Universal metal
360 Degree Rotatable Clip, Shoulder Clip

3. Features
5

6

7
Item Description
1.Camera Lens High Definition Camera
2. Power Button
a). Press to turn camera on; Hold for 3 seconds to
turn off camera
b). Press to enter or exit screen saver when camera
is on
3.IR/White
Light button
a). Press to turn IR light on/off;
b). Hold to turn on/off white light
4.Infrared LEDs Records clear image in low light situation. Enable
Clear face view with up to 10 meters
5.Light Sensor Detect changes in light and auto turn on IR for
low-light recording
7.Speaker Built-in speaker
8. Indicator LED Blue: Charging Status
Green: camera is powered up and in standby mode
9.10.11. Status
Indicator LED
Green: camera is powered up and in standby mode,
not recording
Flashing Red: camera is recording video
Flashing Yellow: camera is recording audio only
PLAY & UP KEY
a). Press to scroll up in menu mode
b). In play mode, hold to zoom out the playing image
c). In play mode, press to rewind video
CONFIRM KEY
a). Press to make a selection in menu mode
b). In play mode, press to pause/resume video or
audio playback.
c). In standby mode, press to review files.
MEMU &
DOWN KEY
a). Press to enter into menu mode
b). Press to scroll down in menu mode
c). In play mode, hold to zoom out the playing image
d). In play mode, press to fast forward video
ADD
IMPORTANT FILE
Press to tag importance to audio/video file when
camera is on recording

8
ONE PRESS AUDIO
RECORDING &
CHANGE
RESOLUTION
a). Press to record audio when not in
video-recording mode
b). Press to mute/unmute video when camera is on
video recording
c). Hold to change resolution between 480P and
720P
ONE PRESS
PHOTO SHOT
a). Press to take pictures in standby mode
b). Press to take a single snapshot image while in
video recording
ONE PRESS
VIDEO
RECORDING
a). Press to start/stop recording
b). Hold to power up camera and start video
recording immediately when camera is powered off.
USB PORT
Connects to USB cable for charging or connection to
PC
PS: optionally connects to external camera
HDMI PORT Connects to 1.3 HDMI cable for video playbackonly
CHARGING BASE
PORT Connect to charging dock to charge the camera

9
Record Status Red blinking record status icon indicates camera is recording,
white solid is standby mode.
Video Recording Time Recorded time of current clip
Battery Charge Current battery charge level
Camera and Officer ID Assigned camera and Officer IDs
Remaining Time Estimated recording hours remaining
SD Card Memory Internal SD Card capacity: Free space/Total capacity

10
4. Main Menu Optional Detail
To enter the setting menu:
1. Press Menu ( ) button and then enter a password.
2. Enter the password by using the following commands:
zPress Scroll Up ( ) button to change the character to the
previous letter or number.
zPress Menu ( ) button to change the character to the next
letter or number.
zPress OK ( ) button to move to the next character
PS: The default password is 000000.
3. After selecting the last character, press OK ( ) button to enter the
setting menu.
To navigate the settings menu:
¾Press Menu ( ) button to select next setting or option.
¾Press Scroll Up ( ) button to select the previous setting or option.
¾Press OK ( ) button to move to confirm your selection or enter the
submenu.
¾Press Power ( ) button to return to the previous menu without
changing anything.
Following is a list of the available settings and options. The bold items are
the default options.

11
Setting Description Options
Resolution The image resolution for video
2304×1296 30P
1920×1080 30P
1440×1080 30P
1280×720 60P
1280×720 30P
848×480 60P
848×480 30P
720×480 30P
Megapixels The image resolution for photos
32M (7600×4275 16:9)
30M (7304×4104 16:9)
28M (7056×3968 16:9)
25M (6664×3752 16:9)
23M (6480×3648 16:9)
21M (6144×3456 16:9)
20M (5960×3352 16:9)
16M (5336×3000 16:9)
12M (4608×2592 16:9)
10M (4384×2466 16:9)
8M (3456×1944 16:9)
5M (3008×1688 16:9)
Burst The number of images captured when you
take a photo. Off, 2, 3, 5, 10, 15, 20
Self Timer
The amount of time the camera waits to
take a photo after you press Snapshot
button.
off, 5 sec, 10 sec
Continuous
shooting
When on, pressing the snapshot button will
activate continuous shooting during which
the camera will automatically taking a
picture at regular intervals. Press this
button again to stop shooting. When off,
this feature will be disabled.
off, 5 sec, 10 sec
Quality The quality of the image for video and
photo files. S. Fine, Fine, Normal
Pre-record
When on, any video you record will include
some of the time that elapsed before you
press the Record button (stored in the
camera buffer); When off, any video you
record will include only video and audio
from the point after you press the Record
button.
Off, On

12
Delay
Record
The amount of the time the camera waits
to stop recording video after you press the
Record button.
off, 5 sec, 1 minute, 10
minutes
Car DVR
Mode
When on, camera will power up
automatically and start video recording
when it is charged. Camera will power off
as it normally does when it is disconnected
from the power source.
Off, On
Loop
Recording
When on, camera will overwrite the oldest
video file with the most current video file
once its memory is full.
Off, On
Split Time
While recording video, the camera will
automatically split its recording into files of
this length.
3min, 5 min, 10 min, 15
min, 30 min, 45min
Slides Show
When on, viewing photo file will start a
slideshow where each photo will be shown
for around 5 seconds.
Off, on
Infrared
When set to manual, you will need to hold
Snapshot button to turn IR LEDs on/off.
When set to Auto, these lights will activate
automatically based on the light sensor's
reading.
Manual, Auto, off
White Led White Led light to offer light source Off, On
Motion
Detect
When on, camera will start recording when
front movement is detected by the lens. Off, On
Recording
warning
When on, you will hear a voice
confirmation when you start recording.
When off, voice confirmation is disabled.
Off, On
GPS
When GPS is on, position of video will be
recorded and can be reviewed by GPS
player.
Off, On
Time Zone Adopt local time in real time zone -12 to +12
Language The language of the text in camera
interface
English, 繁體中文, Pус
ский, Jezyk Polski,
French, 日本語，
Portuguese
Screen
Saver
The amount of the time the camera can be
idle before deactivating the display to
conserve power.
Off, 30 sec, 1 min, 3 min, 5
min
Auto Power
off
The amount of the time the camera can be
idle before powering off.
Off, 30 sec, 1 min, 3 min, 5
min
LED Light
When on, indicator LED will tell the
status of the camera; When off, camera is
entering covert mode
On, Off

13
Key Tone
When on, camera will play a tone each time
you press a button. When off, tone is
disabled.
On, Off
Volume
The volume of camera speaker. This affects
the loudness of video playback, audio
playback, the key tone, record warning, and
any other sounds played by camera. This
doesn't affect the volume of the recorded
video or audio files themselves.
0-12
ID setting User can set Device SN and Person SN Alphanumeric characters
Change
Password Password can be set or changed Alphanumeric characters
Time Setup Adjust time to real location yyyy/mm/dd __:__
Default
setting
Use this to return camera to its original
settings. This does not erase the memory. O (Yes), X (No)

14
5. Operation
5.1 Power on/off
1) Power on: when camera is off, press ( ) button, camera will power up
and enter standby mode;
zBoot up image shows up;
zWorking status LED indicator turns green;
zBoot up music;
zCamera vibrates;
zCamera voice “beeps” when [Record Warning] is ON.
2) Power off: press and hold power ( ) button for 2 seconds to turn off
working-status camera:
zSave video/audio files before power-off;
zWorking status indicator turns off;
zPower off image;
zPower off music;
zCamera vibrates.
5.2 Resetting
Press reset button (inside HDMI port) to have camera resetting when
camera works abnormally. Please note: DO NOT PRESS this button except
maloperation.
5.3 Infrared Night Vision
While under dark circumstances, infrared LED will help to record clear image
or video in HD.
In standby mode, PRESS Menu ( ) button to navigate. Find option
【Infrared】, PRESS OK ( ) button to enter sub-menu: Manual & Auto,
press OK ( ) button to select.
1) Auto infrared mode:
In low light situations (3 Lux), 8 IR LEDs will be turned on automatically,
camera switches on infrared filter lens, video image turn black and white.

15
Otherwise, when circumstance brightness grew up, IR LED turns off, and
image becomes colorful again.
2) Manual infrared mode:
When night vision is needed, PRESS IR light button to switch to Infrared
mode, IR LEDs will be turned on, black and white image. PRESS this button
again to turn off IR LEDs, image becomes colorful.
5.4 Take Photos
In standby, PRESS snapshot ( ) button to take a snapshot, with a sound
“Click”, LED working status indicator will flash green once, and the photo
stored. The photo resolution and quality can be set in the settings.
5.5 Snapshot
While camera is video recording, PRESS snapshot ( ) to take a snapshot.
On the LCD display, there will be a flashing green square, which refers to
that a photo has been taken while video is recording.
5.6 Video Recording
In standby mode, PRESS record ( ) button, indicator LED flashes Alternate
Red and Green, then camera “beep” and vibrates, starts video recording. If
the voice is on, camera will start video recording with indication voice. PRESS
record ( ) button again, video recording stops and camera switches to
standby mode, working status indicator changes to green.
5.7 Motion Detection
In settings, please find [Motion Detect] option. PRESS OK ( ) button to
select.
Sub options: ON/OFF
PRESS record ( ) button to activate motion detection, any moments are
detected, camera will start recording. If there are no movements for 10
seconds, camera will stop recording. Once any movements detected, camera
will start video recording again.

16
5.8 Audio Recording
In standby mode, PRESS Audio ( ) button, with a beep and camera
vibration, LED indicator turn yellow and flashes, audio recording started.
PRESS Audio ( ) button again to stop audio recording.
5.9 One Button recording
When camera is powered off, HOLD Record ( ) button, camera will
initiate and start video recording immediately.
5.10 Tag Important file
In audio or video recording, PRESS importance tag ( ) button, camera
vibrates, the audio or video file will be tagged important, with a yellow icon
( ) showing on the top right of the LCD screen.
5.11 Device ID/ User ID
In standby mode, PRESS Menu ( ) button to enter settings. Find [ID
setting], PRESS OK ( ) button to select. Enter the password, the default
password is: 00000. After right password entered, the Device & Person SN
interface show up, 5 characters for device and 6 characters for Person.
PRESS scroll-Up ( ) button or Scroll-down ( ) button to highlight a
character, then PRESS OK ( ) button to select.
5.12 Time Setting
In standby mode, PRESS Menu ( ) button to enter settings. Find Time bar,
for example, 2008/02/02 07:40. PRESS OK ( ) button and enter the
password, then users can change the date and time.
Press Scroll-Up ( ) button or Scroll-down ( ) button to highlight a
character, the PRESS OK ( ) button to select.
5.13 USB Driver

17
After being connected to PC, password interface shows up, please enter the
password(default password is 000000), the camera will be recognized by the
computer.
5.14 Playback
1) In playback mode, PRESS OK ( ) to pause/resume playback; PRESS
Scroll-Up ( ) button to rewind, PRESS Scroll-down ( ) button to fast
forward, then PRESS OK ( ) to play normally. You can fast forward or
rewind 2x, 4x, 8x, 16x, 32x, 64x, 128x.
2) Exit the Playback mode:
In Playback mode, PRESS Record ( ) button to get back to standby mode
step by step.
5.15 External Mini Camera (optional)
Connect the external camera to USB port, the audio and video signal input
will be switched to external camera automatically. Meanwhile, the external
camera can be controlled by the main body camera.
Drive-by-wire button operating instructions: When the camera is in standby
mode: A, HOLD the button for 3 seconds to have the external camera
start/stop video recording; B, PRESS the button to take a picture through
external camera.
5.16 Charging
When camera batter is low, the battery icon will flash in the display, and you
will hear a alert tone. When this happens, charge the camera.
While camera is charging, indicator lights blue and will turn off after camera
is fully charged. It will take approximately 4 hours to fully charge the
camera.
Charging methods:
1). Use a USB cable to connect camera’s USB port to one of the following:
zA USB port on your computer (powered on)

18
zThe included USB power adapter (connect to a power outlet)
zThe included car charger.
2). Attach camera to the docking bay. Use a USB cable to connect the
docking bay to one of the following:
zA USB port on your computer (powered on)
zThe included USB power adapter (connect to a power outlet)
zThe included car charger.
5.17 GPS tracking
When GPS turns on, location information will be embedded into the video
and can be reviewed by GPS player.
There will be longitude and latitude data showing up in the upper right
corner of LCD screen when GPS signal is received.
GPS player and Google Earth are stored inside the camera memory.

19
Run GPS player and Google Earth. Open the video (with GPS data) footages
by the GPS player.
PS: you could choose related maps in your region.

20
Click “Google Earth” icon to review GPS route on Google Earth program. (PS:
make sure Google Earth program is working in your PC.)
GPS route on Google Earth.