MKC eNetIO-1-a User manual

eNetIO-1-a Quickguide
This short manual provides the most important
information on operating the eNetIO in a compact
form. You can find more detailed
descriptions on our homepage at
www.enetio.de/downloads
in the technical manual and in the
system setup instructions.
Assembly
Before commissioning the eNetIO, ensure that it is
securely standing or fastened. The position of the
device can be freely selected. The eNetIO can be
mounted on a top hat rail according to EN 60715.
Any control and supply cables used must be fastened
to the screw terminals provided for this purpose
using a screwdriver (PZ2) before operation.
When installing the network cable, make sure that
the plug locks into the socket.
Package content
1 x eNetIO 1 a
1 x Magnet
1 x Quickguide
Safety notification
Please read and follow the safety instructions below
when using the appliance.
We cannot guarantee that accidents or damage will
not occur due to improper use of the appliance.
Please use this product with care and at your own
risk.
You can find more information about
our products and services at
www.mkc gmbh.de
08/2023

eNetIO-1-a Quickguide
Technical specifications
Dimensions LxWxH [mm] 90 x 17,5 x 60
Ambient temperature [°C]
Operation min: 0 max: 50
Storage min: 40 max: 80
Air humidity [% r.H.] min: 0 max: 90
Power supply
Network PoE IEEE802.3af, Class 0
Voltage [V] min: 18 max: 48
power consumption [W] typ: 0,5 max: 3,84
Network
Network interface RJ45; 10/100 MBit
IP address, IP mask
1
192.168.015.100 / 24
MDNS address See label on the eNetIO
Administrator name
1
user_su
Administrator password
1
pass_su
1
Factory setting / changeable
Confo mity
Digital outputs
Quantity 1
Contacts A1 A2
Implementation Relay, normally open
Rated voltage max: 250V~
Rated current max: 6A
Wire cross section [AWG] min: 24 max: 16
Digital inputs
Quantity 1
Contacts B1 B2
V
IH
min: 12V AC/DC max: 230V AC/DC
V
IL
max: 6V AC/DC
Wire cross section [AWG] min: 24 max: 16
Recycling
You can find more information about
our products and services at
www.mkc gmbh.de
08/2023