Mo-vis Q2M Guide

User & Installation Manual
EN
Q2M mounting system
Contact & Product
mo-Vis BVBA
Biebuyckstraat 15 D
9850 Nevele - Belgium
Website: www.mo-vis.com
E-mail: [email protected]om
Telephone: [phone]
User & Installation manual
Produced and published by
mo-Vis bvba, Belgium
Edition 1, February 2018
Manual item: D-M004-AA-70

2
Contents
Contact & Product -------------------------------------------------------------------- 1
Contents -------------------------------------------------------------------------------- 2
Important information about this Manual-------------------------------------- 2
Support, scrapping and spare parts ---------------------------------------------- 3
Warranty-------------------------------------------------------------------------------- 3
Safety precautions-------------------------------------------------------------------- 4
Design and function of the Q2M mounting system--------------------------- 7
Installation instructions ------------------------------------------------------------13
Maintenance--------------------------------------------------------------------------13
Technical data ------------------------------------------------------------------------14
Important information about this Manual
Congratulations for choosing a mo-Vis product! If you would like to
learn more about mo-Vis and its products, we invite you to visit our
website: www.mo-vis.com.
Before you install or begin using this product, it is important that you
read and understand the content of these installation and operating
instructions, the safety instructions in particular.
The installation instructions will guide you as an installer through the
options and possibilities with the mo-Vis product.
The operating instructions are primarily intended to acquaint you
with the functions and characteristics of the mo-Vis product and how
you can use it in the best manner possible. They also contain
important safety and maintenance information, as well as describe
possible problems that can arise during use. Always keep the
operating instructions handy in connection with your wheelchair or
other mounting base, since the need for important information can
arise concerning its use, safety and maintenance.
All information, pictures, illustrations and specifications are based on
the product information that was available at the time of printing.
Pictures and illustrations shown in these instructions are
representative examples and are not intended to be exact depictions
of the various parts of the product.

mo-Vis Q2M - Quick To Mount Manual 3
We reserve the right to make changes to the product without prior
notice.
Ordering documentation
You can download additional copies of this User & Installation
manual on the mo-Vis website: www.mo-vis.com.
Support, scrapping and spare parts
Technical support
In case of technical problems, we advise you contact your dealer.
If the dealer is not available, or unknown, please contact mo-Vis bvba
by email [email protected] or by phone [phone].
Always state the device serial number or order code when contacting
mo-Vis. This ensures you are provided with the correct information.
Spare parts and accessories
Spare parts and accessories must be ordered by the dealer at mo-Vis
bvba.
Scrapping & recycling
For scrapping, adhere to your local waste legislation.
Dispose of obsolete mechanical or electronic parts responsibly in
accordance with local recycling regulations.
Warranty
mo-Vis bvba warrants the M2Q parts to be free from defects in
material and workmanship for a period of 2 years under proper use,
care and service. All warranties only cover parts and do not extend
beyond the initial purchaser from an authorised mo-Vis dealer.
Start of the warranty period
Each warranty shall begin on the date the product is first delivered to
the customer.
Repair and replacement
For warranty service, we advise you to contact the dealer from whom
the product was purchased. In the event of a defect in material or
workmanship, the dealer must obtain a return authorisation (RA)

4
number from mo-Vis and the product must be shipped to a service
centre designated by mo-Vis. mo-Vis will repair or, at mo-Vis’ option,
replace any product covered by the warranty.
Disclaimer and Limitations of Remedies
The express warranties set forth in this agreement are in lieu of all
other warranties of merchantability or fitness of purpose. In no event
shall mo-Vis be liable for any direct, indirect, incidental or
consequential damages resulting from any defect in this product.
Warranty of parts subject to “normal wear and tear” (e.g. pads,
joystick balls, batteries …) are not covered in the warranty except as
it applies to defects in material or construction.
Amendments
No person is authorised to alter, extend or waive the warranties of
mo-Vis.
Voiding of warranties
The foregoing warranties are contingent upon the proper installation,
use, maintenance and care of the product. The warranty will be void
if the product has been installed or used improperly, or if it has been
repaired or any part replaced by persons other than mo-Vis or an
authorised dealer. The unit is considered as a non-serviceable part.
The addition of equipment or features that are not manufactured or
recommended by mo-Vis could affect the intended function of the
mo-Vis product and may invalidate the warranty.
Understanding usage
The health care professional (authorised installer) is responsible for
understanding the intended use of the mo-Vis equipment, the
specifications and its programming parameters. mo-Vis cannot be
held responsible for damage caused by incorrect installation or
incorrect use of the product. Misuse, mishandling, or storage is not
covered by this warranty.
Safety precautions
General
The Q2M mounting system is intended to mount small and light
devices, such as joysticks, switches, phone holders, tablet holders,
etc. in a very flexible and modular way.

mo-Vis Q2M - Quick To Mount Manual 5
Incorrect use or installation may lead to risk of injury to the user and
damage to the wheelchair or other property.
In order to reduce these risks, you should carefully read this
instruction manual, paying particular attention to the safety
instructions and warning texts.
Any unauthorised use of the product may lead to increased risk of
accident. Carefully follow the recommendations in this manual in
order to prevent accidents from use.
In case of doubt for alterations and adjustments, always contact a
qualified service engineer.
Warning labels
This manual contains the following warning labels, which are
intended to draw attention to situations that could lead to unwanted
problems, e.g. personal injury or damage to the wheelchair.
CAUTION!
Please use caution where this symbol appears.
WARNING!
Please use extreme caution where this warning symbol appears.
Failure to observe warnings can lead to personal injury or property
damage.
CAUTION!
Limited liability
mo-Vis accepts no liability for personal injury or damage to property
that may arise from the failure of the user or other persons to follow
the recommendations, warnings and instructions in this manual.
WARNING!
Assembly
The Q2M mounting parts should only be installed or adjusted by a
qualified service engineer or someone with adequate knowledge to
perform the adjustment in an expert manner.

6
WARNING!
Maintenance and service
Carry out only the service and maintenance activities specified in this
manual, as long as you comply with the demands stated in this
manual for a specific action. All other service, alterations to and
interventions must be carried out by a qualified service engineer or
someone with adequate knowledge to perform the adjustment in an
expert manner. In case of doubt, contact a qualified service engineer
or mo-Vis.
Use only spare parts or accessories approved or recommended by
mo-Vis. All other use could lead to changes which might impair the
function and safety of the product. It could also lead to the warranty
becoming void.

mo-Vis Q2M - Quick To Mount Manual 7
Design and function of the Q2M mounting
system
Intended use
The Quick-to-mount (Q2M) mounting system is the collective name
for a set of small and intelligent “building modules”, made of light but
durable and robust metal. The mounting system has an elegant black
design and it’s a modular expandable mounting system
Parts and accessories
The Q2M consists of :
Q2M Universal Clamp (M007-01)
A universal and adjustable mounting
clamp to be fixed on a tube (e.g. tube of a
wheelchair frame) with diameter between
19 and 26 mm and with a slot for the
insertion of a flat (20 mm –6 mm) or
round (D10mm) bar.
Q2M Clamp D6 (M004-07) and D8
(M004-14)
The clamps D6 and D8 exist in a thickness
of 6 or 8 mm and come in a set of 10
pieces. They can be fixed in any position
with an Allen wrench.
Q2M Rods D6 (M004-74 till M004-78) and
D8 (M004-83 till M004-85)
The rods exist in different lengths:
with diameter 6 mm : 50 mm, 100
mm, 200 mm, 300 mm and 400 mm
with diameter 8 mm : 50 mm, 100
mm and 200 mm.
The rods are available in a set of 10 pieces.

8
The Q2M consists of :
The Q2M Rods and Clamps
The rods and clamps have been designed
so that they can be easily and quickly
connected to each other. You choose the
distances and angles by tightening or
loosening the clamps via an Allen wrench.
Adjustments can be done any time. For
adjustments at any time without an Allen
key, replace the bolt of the clamp by a
mini clamping lever (M5 or M6x25mm).
Combining clamps and rods
The 8mm and 6mm clamps and rods can
be combined when you mix an 8mm and a
6 mm clamp. Take the upper part of an
8mm clamp and the lower part of a 6mm
clamp. Assemble and fix both parts with
the bolt of the 6 mm clamp.
Q2M Bending Tool 6-8-10mm.
(TMHAT00005)
The rods can be bent with a bending tool.
Place a rod in the corresponding bending
slot (D6, 8 or 10 mm) and bend the rod till
the needed angle. The maximum bending
angle is around 90°.
Bending the rod more than 90° will more
or less damage the coating of the
anodized aluminium rods. The damage
consist of small visible cracks in the
surface of the curved part of the
aluminium bar.
Q2M Rod Lock, Assembly (M008-04)
The rod lock is a rotating swing system
that can be locked in any position and fits
in the Q2M Universal clamp. Just slide a
rod of diameter 6 in it and fix the rod in
the Quick Swing receiver with an Allen
key.

mo-Vis Q2M - Quick To Mount Manual 9
The Q2M consists of :
Q2M Clamp D6 Split (M004-26)
This clamp is specially used with Twisters
bended tube. The split make it possible to
slide in the cable of a Twister Bended tube
switch. These clamps are available in a set
of 10 pieces.
Q2M Mounting Base D6 (M004-24) and D8
(M004-23)
The Quick-to-mount Mounting Base
D6/D8 is a small but firm mounting base
to mount small accessories on any flat
surface, such as a wheelchair tray. By
tightening the 2 provided screws with an
Allen wrench, you fix the Q2M Mounting
Base on a flat surface. The Mounting Base
provides the base to insert a Q2M Rod of
6mm (D6) or 8mm (D8) diameter, on
which again you can add Q2M Clamps and
other Q2M Rods to easily build the
position that is needed to mount a joystick
or other accessories.
Q2M Quick Swing (M008-03)
The Quick Swing is a small swing away
mounting system to mount and swing
away small accessories (e.g. a switch) into
a specific position.
The Quick Swing consists of a receiver
with rotating system from where the
swing away round bar (diameter 6 mm)
leaves. The Quick Swing is mounted with
the Q2M Universal Clamp. The rod can be
bent into the desired shape and angle in
function of the customer's needs.

10
The Q2M consists of :
Multi Swing Mounting Set (M001-70)
The Multi Swing Dogbones set is used by
default to mount the ‘Multi Swing’ swing
away mounting arm. Dogbones are flat
bars made of durable metal, which can be
perfectly used to fix extra modules to the
wheelchair.
The Multi Swing Mounting Set (M001-70)
contains :
Q2M Universal Clamp (M007-01)
Q2M Dogbone Slide Inn (M004-11)
Q2M Dogbone Extension Straight
(M004-12)
Q2M Dogbone Extension Right
Angled (M004-13)
Q2M Multi Swing Bracket(M004-10)

mo-Vis Q2M - Quick To Mount Manual 11
The Q2M consists of :
Q2M Manual Swing Mounting Set
(M004-17)
The Manual Swing Dogbones set is used
by default to mount the ‘Manual Swing’
swing away mounting arm. Dogbones are
flat bars made of durable metal, which can
be perfectly used to fix extra modules to
the wheelchair.
The Manual Swing Mounting Set
(M004-17) contains :
Q2M Universal Clamp
(M007-01)
Q2M Dogbone Slide Inn
(M004-11)
Q2M Dogbone Extension Straight
(M004-12)
Q2M Dogbone Extension Right
Angled (M004-13)
Q2M Manual Swing Bracket Ass.
(M004-10)

12
The Q2M consists of :
Multi Swing P001-60; -61; -62; -63
The Multi Swing mounting arm is a swing
away motorized mounting arm, which is
mounted on an electronic wheel chair.
The Multi Swing is designed for the use of
a chin control system, but can also be
mounted and used for the attachment of
small and lightweight communication
tools, tablets, cellular phones, goblets....
to the electronic wheelchair (max. weight
about 500 gr on max. distance of 65 cm).
This electric swing away arm can be
activated via a switch and can move either
upward or sideways with adjustable speed
and according to an adjustable angle
For more information
take a look at :
http://www.mo-vis.com/en/products/mo-
vis-products/multi-swing
Manual Swing P001-21; -22; -23; -24
The Manual Swing is a versatile arm to
mount on a wheelchair. The Manual Swing
is designed for the use of a chin control
system, but can also be mounted and used
for the attachment of small and
lightweight communication tools to the
wheelchair (max. weight about 500 gr on
max. distance of 65 cm).
For more information
take a look at :
http://www.mo-vis.com/en/products/mo-
vis-products/manual-swing

mo-Vis Q2M - Quick To Mount Manual 13
Installation instructions
Preparations
Qualified service engineer
Only a qualified service engineer may install the Q2M mounting
system parts.
Tools
Use an Allen wrench to install the Q2M mounting parts.
CAUTION!
Use the proper tools to install and adjust the Q2M mounting parts.
The use of improper tools may cause damage to the material.
CAUTION!
Do not tighten screws with an excessive force.
Installation plan
Set up an installation plan before beginning the installation, based on
the users’ needs.
CAUTION!
Any connection must always be secured with supplied screws.
Maintenance
Cleaning
Gently remove dust and dirt with a damp cloth.
The use of non-aggressive disinfectant cleaning agents is allowed.
WARNING!
Do not immerse the material in water or use excessive amounts of
liquid.
Monthly check
Monthly, or whenever needed, check whether:
All bolts and screws are still firmly tightened
There is no excessive wear to any of the parts

14
Technical data
Name
Q2M Universal Clamp (M007-01)
Q2M Clamp D6 (M004-07) and D8 (M004-14)
Q2M Rods D6 (M004-74 till M004-78) and D8
(M004-83 till M004-85)
Q2M Bending Tool 6-8-10mm. (TMHAT00005)
Q2M Rod Lock, Assembly (M008-04)
Q2M Clamp D6 Split (M004-26)
Q2M Mounting Base D6 (M004-24) and D8 (M004-23)
Q2M Quick Swing (M008-03)
Multi Swing Mounting Set (M001-70)
Q2M Manual Swing Mounting Set (M004-17)
Installation date: . . / . . / . . . .
Dealer: . . . . . . . . . . . . . . . . . .
Dealer stamp: