Mobi Technologies Pure Sounds Audio Monitoring System User manual


Compatiblewith…

Compatiblewith…
70290

TABLE OF CONTENTS
Introducon 1
Package Contents 2
Features 3
Consumer Guide to Product
Safety
4-5
Knowing your Receiver 6
Knowing Your Transmier 7
Installaon & Setup 8
Receiver/Transmier Operaon 9
Troubleshoong 10
Radio Interference Advice 11
Warranty 12
Notes 13

INTRODUCTION
Congratulaons on the purchase of the Mobi® Pure Sounds™ Audio Monitor-
ing System, which brings you the latest in wireless technology. We recommend
that you read the instrucons carefully before use.
The Mobi® Pure Sounds™ enables you to transmit audio wirelessly, which is
ideal for monitoring a babies, young children, pets, or the elderly.
Your Mobi® Pure Sounds™ uses a digital transmission to ensure clear and con-
sistent audio transmission. The signal also passes easily through interior walls.
However, buildings with metal frames or placing the transmier near large
metal objects may cause signal degradaon. If recepon is poor, moving the
transmier or receiver may x this problem.

1

PACKAGE CONTENTS FEATURES
1 x Receiver Unit (#70294R)
1 x Transmier Unit (#70294T)
1 X Receiver Power Cord
1 X Transmier Power Cord
1 x Rechargeable Baery Pack
  NOTE:Ifyoundanyofthecontentsaremissingorshouldyouneed
  toorderreplacementparts,pleasecontactthemanufacturerorvisit
  www.getmobi.com.
2

FEATURES
• Trasmission Range up to 600Ft
• 2.4 GHz Private Digital Transmission
• No installaon needed—ready to use
• Compact design for easy portability
• Auto Mute with Voice Acvaon
• Low Baery and Out of Range Indicators
• Rechargeable Baeries Included for Receiver
• AC Adaptors included for Receiver and Transmior
3

CONSUMER GUIDE TO PRODUCT SAFETY
Please read this instrucon manual before using your Mobi® Pure Sounds™ sys-
tem. When using electrical appliances, basic safety precauons should always
be followed.
Please keep safe for future reference.
• This product is not intended to be used as a medical monitor and its
use should not replace adult supervision.
• Periodically examine this product for damage to the cord, housing or
other parts that may result in the risk of re, electric shock or injury.
Do not operate any product with a damaged cord or plug. If the Color
Wireless Monitor malfuncons or is damaged in any manner please
contact the manufacturer for examinaon and repair to avoid a hazard.
• Never use transmier and receiver near water (i.e. bathtub, sink, etc.).
• The AC adaptors are not Toys.
4

• Always use transmier and receiver where there is adequate
venlaon. To prevent overheang, keep away from heat sources
such as radiators, heat registers, stoves, or other appliances that
produce heat.
• Use only a dry coon cloth to keep the units free of dust. Do not
use a damp cloth, water, or liquid cleaner of any kind.
• Remove the baery from the during long periods of
nonuse as alkaline baeries can leak.
• Unplug the AC adaptors from the Monitor during periods
of nonuse. To disconnect from the power supply, grip the
transformer and pull from the power socket. Never pull by
the cord.
• Replace baery with the same equivalent type. Please dispose of
old, defecve baeries in an environmentally friendly manner in
accordance with the relevant legislaon.
• Only use the Monitoring System with the supplied power adaptors.
5

KNOWING YOUR RECEIVER
Buon & LED Funcons
1. Power On/O Buon
2. Volume Up ( + )
3. Volume Down ( - )
4. Sound Level Indicator (LED will ash indicang noise level increase)
5. Power On Indicator (baery charge indicator)
6. Link Indicator LED (LED will blink if connecon is poor/lost)
7. Speaker
8. DC Jack (5V/600mA)
9. Belt Clip
10. Baery Compartment
6
1
2
3
4
5
6
7
89 (To remove push
clip downward )
10

KNOWING YOUR TRANSMITTER
11. Power On Indicator
12. DC Jack (5V/600mA)
7
11
12

INSTALLATION & SETUP
The Mobi® Pure Sounds™ transmier is designed to be powered by either
rechargeable baeries (provided) or the AC/DC adaptors.
Using AC/DC adaptor:
• Plug the connector of the AC adaptor into the DC Jack on the unit (g.
8 pg. 6, g. 12 pg. 7).
• Plug the power cord into an outlet.
• Press the Power On/O Buon (g. 1 pg. 6) to turn ON your receiver.
• The power indicator lights will illuminate indicang units are ON
(g. 5 pg. 6, g. 11 pg. 7)
Using Baeries:
• Remove the belt clip (g. 9 pg. 6) by sliding the clip downwards
• Remove the baery door on your receiver (g. 10 pg. 6)
• Plug in the supplied baery pack into your baery compartment
• Return baery cover and belt clip to their original posion
Note: Baery life is between 3-4 hours. When monitoring over long periods
and, in parcular, overnight, it is recommended to use AC adaptors for the
receiver.
Warning:
1. Use on the supplied baery pack with your receiver.
2. Do not mix old and new baeries.
3. Do not mix alkaline, standard or rechargeable baeries
4. Remove the baeries during long periods of non-use.
5. Use only the AC adaptors supplied with the package.
  Note:TransmieronlyfunconswithACAdaptor.
8