MOBILE SIGNAL BOOSTERS DoCall C15F-5B User manual

PLEASE KEEP APPROPRIATELY AND CAREFULLY READ THIS USER MANUAL BEFORE INSTALLATION
C15F-5B Mobile Signal Booster
User Manual

1
Content
PACKAGE CONTENT......................................................................................................2
PRODUCT DESCRIPTION..............................................................................................2
PRODUCT FEATURES....................................................................................................2
CONNECTOR DESCRIPTION........................................................................................3
TECHNICAL SPECIFICATION....................................................................................... 4
INSTALLATION GUIDES................................................................................................ 4
Installation Requirements................................................................................................................ 4
Installation Tools................................................................................................................................ 5
Installation Steps................................................................................................................................5
Starting..................................................................................................................................................6
MAINTENANCE AND REPAIRING............................................................................... 7
FAQ and Solutions............................................................................................................................. 7
Notes......................................................................................................................................................7
FCC STATEMENT.............................................................................................................8
FCC RF Exposure Statement.......................................................................................................... 8
FCC Warning........................................................................................................................................8
The power supply voltage of the booster
should meet the standards of security
requirements.
Ensure of grounding, waterproof and
lightning protection when installing the
booster.
The booster should be installed and
initiated by professionals.
The user had better not dismantle the
booster to maintain or replace the
components by himself/herself.
Keep the booster away from heat source
and do not install it in a confined space.

C15F-5B Five Band Signal Booster
2
Package Content
C15F-5B signal booster, 1pc 5V/2A power adapter, 1pc screws, 1bag U-shape holder, 1pc
Outdoor antenna, 1pc Indoor antenna, 1pc 32 ft coax cable, 1pc 16 feet coax cable, 1pc
Product Description
C15F-5B booster is suitable for areas with multiple frequencies, supporting amplify
2G/3G/4G signal simultaneously. Carrying with features like compact and portable design,
easy installation and maintenance, C15F-5B mobile signal booster is suitable to enhance and
optimize signal intensity and solve dead zone problem of meeting rooms, offices, apartments,
hotels, basements and small parking lots, etc.
Product Features
LED indicators to show ALC working status
Suitable for area with available 2G/3G/4G signal
Available to cover up to 3000 square feet, depends on input signal intensity and barriers
ALC(Auto Level Control) function enables the device to automatically control amplifying
signal, to ensure stable signal coverage.
Compact design, easy to install and operate.
Low power consumption, low interference and stable performance
FCC certified

3
Connector Description
A：Outdoor antenna port(N-female connector)
B：Indoor antenna port(N-female connector)
C：DC 5V power supply port
D：Grounding screw
E：PCS indicator
F：AWS indicator
G：CDMA indicator
H：LTE12/17 + LTE13 indicator
Indicators in GREEN
Device is operating normally
Indicators in ORANGE
The input power is a little higher, but device
still working well
Indicators in RED
Over input power
Indicators in RED and flashing
Over input power and self-oscillation occurs
A
E
H
G
F
B
C
D

C15F-5B Five Band Signal Booster
4
Technical Specification
Items
Uplink
Downlink
Frequency
Range
LTE12
698 ~ 716 MHz
728 ~ 746 MHz
LTE13
776 ~ 787 MHz
746 ~ 757 MHz
CDMA
824 ~ 849 MHz
869 ~ 894 MHz
AWS
1710 ~ 1755 MHz
2110 ~ 2155 MHz
PCS
1850 ~ 1910 MHz
1930 ~ 1990 MHz
Gain
60±2 dB
60±2 dB
Ripple in Band
CDMA≤8 dB /AWS≤8 dB /PCS≤15 dB / LTE13≤8 dB / LTE12≤10 dB
VSWR
≤2.5
≤2.5
Output Power
17±2 dBm
5±2 dBm
ALC active range
∣△∣≤2 dB
∣△∣≤2 dB
Max. Input Power Without Damage
-10 dBm
-10 dBm
Spurious
Emission
9KHz~1GHz
≤-36 dBm
≤-36 dBm
1GHz~12.75GHz
≤-30 dBm
≤-30 dBm
Time Delay
≤1.5 μs
≤1.5 μs
Alarm Indicator
Not active
—
Green
Active 5~10 dB
—
Orange
Active 15~20 dB
—
Red
Self-oscillated
—
Red and flash
Power Supply
DC: 5V
Power Consumption
< 20 W
RF Connector
N-Female
Dimension
260*165*26mm
Weight
<1.5kg
IP Grade
IP40
Operating Humidity
< 90%
Operating Temperature
0℃~ +50℃
Installation Guides
Installation Requirements
1) With Stable and independent power supply.
2) The booster should be installed in the place without corrosive gas, smog and leaky liquid.
3) The booster should be installed on the wall that is ventilated, waterproof, lightning-proof
and without sunshine.
4) The height of the installation site should be safe and easy for cabling, maintaining,
dissipating heat.

5
Installation Tools
Installation Steps
1) Find a site with the strongest signal for the outdoor antenna with your mobile phone by the
way below. And temporary install the outdoor antenna.The direction of the outdoor antenna
should be towards to nearest base station.
iPhone: Dial *3001#12345#*, then press call. Select “Serving Cell Measurement” to see the
RSRP or RSSI.
Android: Setting→ About Phone → Status or Network → Signal Strength or Network Type and
Strength (options depends on different phone models)
2) The installation site of the indoor antenna should be in the central of the weak signal zones
that you want to boost the signal. The distance between outdoor and indoor antennas should
be 20 feet vertical or 50 feet horizontal.
3) Find a suitable site for the booster, according to the installation requirements and dimension
of the booster.
4) Estimate and mark the sites for installation holes of U-shaped back holder. Drill holes with
the percussion drill. Sizes of holes are 7mm. The expected sites are as follow: (unit: mm)
No.
Items
Quantity
Remarks
1
Percussion drill
1
Drill holes on wall, self-provided
2
Wrench
1
Reinforce the interface connection, self-provided
3
Mobile phone for testing
1
Test installation effectiveness, self-provided
4
Multimeter
1
Test voltage and wiring connection, self-provided
5
Screwdriver
1
Tighten or fasten the device, self-provided
6
Waterproof tape
A lot
Prevent device from liquid leaking into the feeder
interface, self-provided

C15F-5B Five Band Signal Booster
6
5) Put the expansion pipes(size: 8mm) into the 4 drilled holes.
6) As shown in the figure, align the fixing holes of the U-shaped back holder with
corresponding holes on the wall. Then drive 4 M6*40 screws into the expand plugs with
screwdriver. Finally, hang the booster firmly on the U-shaped back holder.
7) Connect coaxial cable from outdoor antenna to end of the booster labeled INPUT or BTS.
The length should be less than 65 feet. And connect coaxial cable from indoor antenna to end
of booster labeled OUTPUT or MS.
Better wrap the waterproof tape around the connection part of the outdoor antenna and
outdoor cable, in case of oxidization or corrosion.
8) Power up the booster and test if the signal is boosted or not. If the booster works well,
permanently install the outdoor and indoor antennas.
Starting
1）If possible, please connect the grounding screw of the booster and grounding of the
electrified wire with a cable.
2）Make sure the feeder cables between booster and antennas are firmly connected.
3）Connect the DC plug of the 5V/4A power adapter to the DC+5V port of the booster.
Then put AC plug connecting to the nearby 220V power outlet.
4）Check if the booster is work normally or not, by observing the status of the indicators.
5）Test the signal intensity and dialing quality with a mobile phone within the booster
coverage area.

7
Maintenance and Repairing
FAQ and Solutions
Problems
Reasonable Causes
Solutions
Indicator lights are off
Disconnected to power source
Check the power adapter and
power outlet, and reconnect it
Everything is okay after
power-on, but no
improvement in signal
The network of SIM card does not
comply with that of signal booster
Replace SIM card or booster
The input signal is too weak
Change the direction or height
of the antenna
The indoor antenna is damaged
Replace the indoor antenna
Working effectiveness of
the booster degrades after
working for a while
The outdoor antenna is damaged
Replace the outdoor antenna
The outdoor antenna get loose and
direction is not towards the BTS
Change the direction of
outdoor antenna and fasten it
Cable is damaged
Replace the cable
Notes
Power-off is recommended when the following situations occur.
Power supply is abnormal.
Liquid flows into the device or device is too close to the fire source
The device is overheating or strange smell are founded.

8
FCC Statement
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instruction for satisfying RF
exposure compliance. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
FCC Warning
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless
provider and have your provider’s consent. Most wireless providers
consent to the use of signal boosters. Some providers may not consent
to the use of this device on their network. If you are unsure, contact your
provider.
You MUST operate this device with approved antenna and cables as
specified by the manufacturer. Antennas MUST be installed at least
20cm (8 inches) from any person.
You MUST cease operating this device immediately if requested by the
FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be
inaccurate for calls served by using the device.
This device may be operated ONLY in a fixed location for in-building
usage.
Warning 1: The Inside Antennas for fixed installations must have 6 feet of separation distance
from all active users.
Warning 2: The Outdoor Antennas for fixed installations must be installed no higher than 10
meters above ground.