Modecom XVIN User manual

www.modecom.eu
U
s
e
r
M
a
n
u
a
l
n
o
t
e
b
o
o
k

www.modecom.eu
2
www.modecom.eu
TABLE OF CONTENTS
english 3-20
polski 21-38
français 39-56
deutsch 57-74
español 75-92
italiano 93-110

www.modecom.eu
www.modecom.eu
3
ENGLISH
Copyright©2006 Mode Com Ltd. All rights reserved. The Mode Com logo is registered trademark of Mode Com Ltd.
TAKING CARE OF YOUR NOTEBOOK PC
DO NOT press or touch the display panel.To prevent possible overheating of the
computer’s processor, make sure you do-
n’t block the openings provided for venti-
lation.
DO NOT place on uneven or unstable work
surfaces.
DO NOT use your notebook computer un-
der harsh conditions.
DO NOT place or drop objects on the compu-
ter and DO NOT apply heavy pressure on it.
DO NOT subject the computer to magnetic
elds.

www.modecom.eu
4
www.modecom.eu
DO NOT expose to direct sunlight. DO NOT use or store in extreme tempera-
tures.
Avoid sudden changes in temperature or
humidity by keeping it away fromA/C and
heating vents.
DO NOT expose the computer to rain or
moisture.
DO NOT place near re or other sources of
heat.
DO NOT tamper with the batteries. Keep
them away from children.

www.modecom.eu
www.modecom.eu
5
ENGLISH
DO NOT expose to dust and/or corrosive
chemicals.
DO NOT slam your notebook shut and ne-
ver pick up or hold your notebook by the
display.
DO NOT spray water or any other cleaning
uids directly on the display.
If you are traveling with your computer, re-
member to carry it as hand luggage. Do not
check it in as baggage.
BEFORE YOU START
Make sure you have everything
When you receive your notebook PC, unpack it carefully, and check to make sure you have
all the items listed below. For a pre-congured model you should have the following:
• Notebook Computer
• Lithium-Ion battery
• AC adapter with power cord
• Driver and Applications CD
• Quick Start Guide or User Guide
Depending upon the conguration of your notebook, you may also need following items:
• DVD / CD-RW Combo Application CD
• Dual DVD+/-RW Application CD
Once you have checked and conrmed that your notebook system is complete, read
through the following pages to learn about all of your notebook components.

www.modecom.eu
6
www.modecom.eu
BEFORE YOU START
6
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
Familiarize yourself with the computer
OPENING THE DISPLAY PANEL
To open, slide the latch and then simply lift the lid up.
When closing it, be sure not to slam it shut.
Familiarize yourself with the computer
OPENINIG THE DISPLAY PANEL
To open, slide the latch and then simply lift the lid up.
When closing it, be sure not to slam it shut.
FRONT OVERVIEW
The following is an overview of the front of the notebook.
BEFORE YOU START
7
Display Panel
Suspend/Resume/
Power On Button
Keyboard
Status Indicator
Lights
Microphone Jack
Headphone Jack
TouchPad
Pointing Device
Quick Start Buttons
Wireless LAN
IEEE 1394 Port
Line-In Jack
FRONT OVERVIEW
The following is an overview of the front of the notebook.
Array Microphone
The built-in array microphone is an omni-directional audio input device. It allows for the stereo
reception and transmission of voice and/or other audio data to any program capable of accepting
such input.
Display Panel
The display panel is a color LCD panel with back lighting for the display of text and graphics.
Keyboard
A full-size keyboard with dedicated Windows®keys.
Stereo Speakers
The built-in dual speakers allow for stereo sound.
Status Indicator Lights
The Status indicator lights correspond to specific operating modes. These modes are: Caps lock,
Num Lock, Hard drive Activity (HDD), Wireless/Bluetooth Activity, Power On status, Battery/
AC Adpater status, Memory Card Reader Activity.
Array Microphone

www.modecom.eu
www.modecom.eu
7
ENGLISH
Array Microphone
The built-in array microphone is an omni-directional audio input device. It allows for the
stereo reception and transmission of voice and/or other audio data to any program capable
of accepting such input.
Display Panel
The display panel is a color LCD panel with back lighting for the display of text and
graphics.
Keyboard
A full-size keyboard with dedicated Windows® keys.
Stereo Speakers
The built-in dual speakers allow for stereo sound.
Status Indicator Lights
The Status indicator lights correspond to specic operating modes. These modes are: Caps
lock, Num Lock, Hard drive Activity (HDD), Wireless Activity, Power On status, Battery/ AC
Adpater status, Memory Card Reader Activity.
Wireless LAN
The Wireless LAN button enables and disables Wireless LAN activity.
Quick Start Buttons
The four quick start buttons allow you to launch your favorite Internet and E-mail applica-
tions with the press of a button.You can also engage the computer’s Silent and Mute modes
by press Silence and Mute button.
Suspend/Resume/Power On Button
This button turns your notebook on and o as well as puts it to sleep. (See Suspend/Resume/
Power On Button in the Power On section for more information.)
TouchPad Pointing Device
The TouchPad pointing device is a mouse-like cursor control with two buttons and a touch
sensitive movement pad.
Microphone Jack
The microphone jack allows you to connect an external mono microphone.
Headphone Jack
The headphone jack allows you to connect headphones or external speakers and am-
pliers.

www.modecom.eu
8
www.modecom.eu
Line-In Jack
The line-in jack allows you to connect external audio recording and playback devices.
IEEE 1394 Port
The 1394 port is used to connect between your and a peripheral such as a digital video
camera.
LEFT SIDE OVERVIEW
The following is a brief description of the left side of the notebook.
Power Adapter Port
The power adapter port allows you to plug in the AC adapter to power your notebook and
charge the internal Lithium-Ion battery.
Port Replicator Interface
The Port Replicator Interface allows you to connect additional peripheral devices to your
computer through a „universal” port, as it were. The Port Replicator itself contains all the
necessary additional ports, and connects to your computer through a single port on the left
side of the computer. (Not available in all congurations.)
Modem (RJ-11) Port
The modem (RJ-11) port is used to attach a telephone line to the internal 56K modem.
BEFORE YOU START
9
Power Adapter Port
Port Replicator Interface External Monitor/DVI Port
USB Ports
S-Video/TV Out Port
Modem (RJ-11) Port
LEFT SIDE OVERVIEW
The following is a brief description of the left side of the notebook.
Power Adapter Port
The power adapter port allows you to plug in the AC adapter to power your notebook and charge
the internal Lithium-Ion battery.
Port Replicator Interface
The Port Replicator Interface allows you to connect additional peripheral devices to your com-
puter through a "universal" port, as it were. The Port Replicator itself contains all the necessary
additional ports, and connects to your computer through a single port on the left side of the
computer. (Not available in all configurations.)
Modem (RJ-11) Port
The modem (RJ-11) port is used to attach a telephone line to the internal 56K modem.
Depending on your configuration:
External Monitor Port
The external monitor port allows you to connect an external monitor.
Or
DVI Port
The DVI port allows you to connect an external monitor or television to the computer using
a Digital Video Interface cable.

www.modecom.eu
www.modecom.eu
9
ENGLISH
Depending on your conguration:
External Monitor Port
The external monitor port allows you to connect an external monitor.
Or
DVI Port
The DVI port allows you to connect an external monitor or television to the computer
using a Digital Video Interface cable.
S-Video/TV Out Port
The S-video/TV out port allows you to connect to video devices such as, a television, projec-
tor, or a VCR, to your computer.
USB Ports
The USB ports allow you to connect Universal Serial Bus devices. They support v2.0 of the
USB standard, which allows data exchange rates as high as 480 Mb/s.
BEFORE YOU START
10
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
S-Video/TV Out Port
The S-video/TV out port allows you to connect to video devices such as, a television, projector,
or a VCR, to your computer.
USB Ports
The USB ports allow you to connect Universal Serial Bus devices. They support v2.0 of the USB
standard, which allows data exchange rates as high as 480 Mb/s.
RIGHT SIDE OVERVIEW
The following is a brief description of the right side of the notebook.
BEFORE YOU START
11
Memory Card
Reader
PC Express Card Slot
USB Port
Optical Drive Activity Indicator
Optical Drive
Emergency Tray Release
Optical Drive
Eject Button
Kensington
Lock Slot
LAN (RJ-45)
Port
PC Express Card Slot
The PC Card Slot allows you to install one Type-II PC Express Card.
Memory Card Reader
The memory card reader offers the fastest and most convenient method to transfer pictures, music
and data between your notebook and flash compatible devices such as digital cameras, MP3
players, mobile phones, and PDAs.
USB Ports
The USB ports allow you to connect Universal Serial Bus devices. They support v2.0 of the USB
standard, which allows data exchange rates as high as 480 Mb/s.
Optical Drive
The Optical Drive allows you to play back a media discs, such as CDs and DVDs.
Optical Drive Activity Indicator
This light flickers to indicate activity when the ODD is playing a media disc or is being accessed
by the operating system.
Optical Drive Eject Button
The Optical Drive Eject Button allows you to open the Optical Drive tray to remove or insert a
DVD or CD.
Emergency Tray Release
The Emergency Tray Release allows you to open the Optical Drive tray without powering on
your notebook.
LAN (RJ-45) Port
The LAN port is designed to support a 10/100 or 10/100/1000(option) Base-TX standard RJ-45 plug.
Kensington Lock Slot
The Kensington lock slot allows you to secure your notebook to an immovable object through an
optional security cable.
RIGHT SIDE OVERVIEW
The following is a brief description of the right side of the notebook.
USB Port

www.modecom.eu
10
www.modecom.eu
PC Express Card Slot
The PC Card Slot allows you to install one Type-II PC Express Card.
Memory Card Reader
The memory card reader oers the fastest and most convenient method to transfer pic-
tures, music and data between your notebook and ash compatible devices such as digital
cameras, MP3 players, mobile phones, and PDAs.
USB Ports
The USB ports allow you to connect Universal Serial Bus devices. They support v2.0 of the
USB standard, which allows data exchange rates as high as 480 Mb/s.
Optical Drive
The Optical Drive allows you to play back a media discs, such as CDs and DVDs.
Optical Drive Activity Indicator
This light ickers to indicate activity when the ODD is playing a media disc or is being ac-
cessed by the operating system.
Optical Drive Eject Button
The Optical Drive Eject Button allows you to open the Optical Drive tray to remove or insert
a DVD or CD.
Emergency Tray Release
The Emergency Tray Release allows you to open the Optical Drive tray without powering
on your notebook.
LAN (RJ-45) Port
The LAN port is designed to support a 10/100 or 10/100/1000(option) Base-TX standard RJ-
45 plug.
Kensington Lock Slot
The Kensington lock slot allows you to secure your notebook to an immovable object
through an optional security cable.

www.modecom.eu
www.modecom.eu
11
ENGLISH
BACK OVERVIEW
The following is an overview of the back of the notebook.
BEFORE YOU START
12
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
Fan Outlets
Compartment
Cover
Lithium-Ion Battery Bay
Rating Label
BOTTOM OVERVIEW
The following is an overview of the bottom of the notebook.
Fan Outlets
These are open ports for the fan to dissipate heat from the computer's internal components. Do
not block or place the computer in such a position that you inadvertently allow the outlets to
become blocked.
Rating Label
The label shows the model number and other information about your notebook.
Compartment Cover
The Wireless LAN compartment contains the Wireless LAN card. The memory compartment
contains the computer's memory modules. The internal hard disk drive is accessible through the
hard disk drive bay. The CPU sits in the CPU bay.
Lithium-Ion Battery Bay
The battery bay contains the internal Lithium-Ion battery. It can be opened for the removal of the
battery when stored over a long period of time or for swapping a discharged battery with a
charged Lithium-Ion battery.
BACK OVERVIEW
The following is an overview of the back of the notebook.
BOTTOM OVERVIEW
The following is an overview of the bottom of the notebook.
BEFORE YOU START
12
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
Fan Outlets
Compartment
Cover
Lithium-Ion Battery Bay
Rating Label
BOTTOM OVERVIEW
The following is an overview of the bottom of the notebook.
Fan Outlets
These are open ports for the fan to dissipate heat from the computer's internal components. Do
not block or place the computer in such a position that you inadvertently allow the outlets to
become blocked.
Rating Label
The label shows the model number and other information about your notebook.
Compartment Cover
The Wireless LAN compartment contains the Wireless LAN card. The memory compartment
contains the computer's memory modules. The internal hard disk drive is accessible through the
hard disk drive bay. The CPU sits in the CPU bay.
Lithium-Ion Battery Bay
The battery bay contains the internal Lithium-Ion battery. It can be opened for the removal of the
battery when stored over a long period of time or for swapping a discharged battery with a
charged Lithium-Ion battery.
BACK OVERVIEW
The following is an overview of the back of the notebook.
Fan Outlets
These are open ports for the fan to dissipate heat from the computer’s internal compo-
nents. Do not block or place the computer in such a position that you inadvertently allow
the outlets to become blocked.
Rating Label
The label shows the model number and other information about your notebook.
Compartment Cover
The Wireless LAN compartment contains the Wireless LAN card. The memory compart-
ment contains the computer’s memory modules. The internal hard disk drive is accessible
through the hard disk drive bay. The CPU sits in the CPU bay.

www.modecom.eu
12
www.modecom.eu
Lithium-Ion Battery Bay
The battery bay contains the internal Lithium-Ion battery. It can be opened for the removal
of the battery when stored over a long period of time or for swapping a discharged battery
with a charged Lithium-Ion battery.
GETTING STARTED
Power Sources
Your computer has two types of power source: a Lithium-Ion battery or an AC adapter.
CONNECTING THE POWER ADAPTERS
The AC adapter provides power for operating your notebook PC and charging the battery.
Connecting the AC Adapter
1. Plug the DC output cable into the DC power jack of your notebook PC.
2. Plug the AC adapter into an AC electrical outlet.
Switching from AC Adapter Power to Battery Power
1. Be sure that you have at least one charged battery installed.
2. Remove the AC adapter. Your notebook will automatically switch from DC power to bat-
tery power.
Note: The Lithium-Ion battery is not charged upon purchase. Initially, you will need
to connect the AC adapter to use your notebook PC.
RECHARGING THE BATTERY
The Lithium-Ion battery is recharged internally using the AC adapter. To recharge the bat-
tery, make sure the battery is installed and the computer is connected to the AC.
There is no„memory eect”in Lithium-Ion batteries; therefore you do not need to discharge
the battery completely before recharging. The charge times will be signicantly longer if
your notebook PC is in use while the battery is charging. If you want to charge the battery
more quickly, put your computer into Suspend mode, or turn it o while the adapter is
charging the battery.

www.modecom.eu
www.modecom.eu
13
ENGLISH
Low Battery State
When the battery charge is low, a notication message appears. If you do not respond to
the low battery message, the batteries continue to discharge until they are too low to oper-
ate. When this happens, your notebook PC goes into Suspend mode. There is no guarantee
your data will be saved once the notebook reaches this point.
Note: To protect your computer from damage, use only the power adapter that came
with it because each power adapter has its own power output rating.
Once your note computer goes into Suspend mode as a result of a dead battery you will
be unable to resume operation until you provide a source of power either from an adapter,
or a charged battery. Once you have provided power, you can press the Suspend/ Resume
button to resume operation. In Suspend mode, your data is maintained for some time, but
if a power source is not provided promptly, the Power indicator stops ashing and the goes
out, in which case you have lost the data that was not saved. Once you provide power, you
can continue to use your computer while an adapter charges the battery.
STARTING YOUR NOTEBOOK
POWER ON
Suspend/Resume/Power On Button
The suspend/resume/power on switch is used to turn on your notebook from its o state.
Once you have connected your AC adapter or charged the internal Lithium-Ion battery, you
can power on your notebook by pressing the suspend/resume/on button located above
the keyboard. If you need to take an extended break, press the button again to turn it o.
Note: Do not carry your notebook around with the power on or subject it to shocks or
vibration, as you risk damaging the hard disk.
When you power on your notebook, it will perform a Power On Self Test (POST) to check the
internal parts and conguration for correct functionality. If a fault is found, your computer
emits an audio warning and or displays and error message.
Depending on the nature of the problem, you may be able to continue by starting the op-
erating system or by entering the BIOS setup utility and revising the settings. After satisfac-
tory completion of the Power On Self Test (POST), your notebook loads the installed oper-
ating system.
Note: Never turn o your notebook during the Power On Self Test (POST), or an unre-
coverable error may occur.

www.modecom.eu
14
www.modecom.eu
Status Indicators
The Status indicator lights correspond to specic operating modes.These modes are: Power
On/Suspend Status; Battery/AC Adapter status; Memory Card Reader Activity; and Wireless
LAN Activity. Furthermore, at the top of the keyboard there are four additional status indi-
cator lights: Caps Lock,Num Lock, Hard driver Activity and Wireless.
GETTING STARTED
16
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
Power On Indicator/
Suspend Status
Indicator
Battery
HDD Activity Indicator
Wireless LAN
Activity Indicator
Internet
E-mail
Silence
WLAN
Media Card
Status
Indicator
Light sensor
Caps Lock Indicator
Num Lock Indicator
Mute
Status Indicators
The Status indicator lights correspond to specific operating modes. These modes are: Power On/
Suspend Status; Battery/AC Adapter status; Memory Card Reader Activity; and Wireless LAN/
Bluetooth Activity. Furthermore, at the top of the keyboard there are four additional status
indicator lights: Caps Lock,Num Lock, Hard driver Activity and Wireless/Bluetooth.
The Caps Lock Indicator
This indicator tells you that the keyboard is set to type in all capital letters.
The Num Lock Indicator
This indicator states that the internal keyboard is set in ten-key numeric keypad mode.
Hard Disk Drive (HDD) Activity Indicator
The Hard Disk Drive (HDD) Activity indicator tells you whether your internal hard drive is being
accessed and, if so, how fast.
The Caps Lock Indicator
This indicator tells you that the keyboard is set to type in all capital letters.
The Num Lock Indicator
This indicator states that the internal keyboard is set in ten-key numeric keypad mode.
Hard Disk Drive (HDD) Activity Indicator
The Hard Disk Drive (HDD) Activity indicator tells you whether your internal hard drive is be-
ing accessed and, if so, how fast.

www.modecom.eu
www.modecom.eu
15
ENGLISH
Power On Indicator
This light on the power button illuminates when the computer is powered on.
Suspend Status Indicator
This light ashes when the computer is in the Suspend mode.
Battery Indicator
The Battery indicator light tells you whether the Lithium-Ion battery is charging or is already
fully charged.
• If you are charging your battery, the Battery indicator lights remains on even if your note-
book is shut o.
• If there is no battery activity, the power adapters are not connected, or the power switch
is O, the Battery indicator will also be o.
• Batteries subjected to shocks, vibrations or extreme temperatures can be permanently
damaged.
Wireless LAN Activity Indicator
The Wireless LAN Activity indicator tells you whether your computer is connected to a wire-
less network or not.
Media Card Status Indicator
This light ickers when the computer is reading a multimedia or SD card.
Using Function Keys
Your computer has 12 function keys, F1 through F12. The functions assigned to these keys
dier for each application. You should refer to your software documentation to nd out
how these keys are used.
The [FN] key provides extended functions for the notebook and is always used in conjunc-
tionwith another key.
• [FN+F1]: Places the notebook in Suspend mode. Pressing the Power button returns it to
active mode.
• [FN+F2]: Enables or disables the wireless network connection.
• [FN+F3]: Allows you to change your selection of where to send your display video. Each
time you press the combination of keys you will step to the next choice. The choices, in
order, are: built-in display panel only, both built-in display panel and external monitor, or
external monitor only.
• [FN+F4]: Decreases the screen Brightness.
• [FN+F5]: Increases the screen Brightness.
• [FN+F6]: Mutes the computer’s volume.

www.modecom.eu
16
www.modecom.eu
• [FN+F7]: Decreases the computer’s volume.
• [FN+F8]: Increases the computer’s volume.
• [FN+F9]: Plays or pauses the current multimedia track.
• [FN+F10]: Stops the current multimedia track.
• [FN+F11]: Goes to the previous multimedia track.
• [FN+F12]: Goes to the next multimedia track.
• [FN+Home]: Enables or disables the Light Sensor function.
Using the TouchPad
A TouchPad pointing device comes built into your computer. It is used to control the move-
ment of the pointer to select items on your display panel.
The TouchPad consists of a cursor control, a left and right button, and two scroll buttons.
The cursor control works the same way a mouse does, and moves the cursor around the di-
splay. It only requires light pressure from the tip of your nger. The left and right buttons
function the same as mouse buttons. The actual functionality of the buttons may vary de-
pending on the application that is being used. Finally, the scroll buttons allow you to navi-
gate quickly through pages, without having to use the on-screen cursor to manipulate the
up and down scroll bars.
GETTING STARTED
19
Using the TouchPad
A TouchPad pointing device comes built into your computer. It is used to control the movement
of the pointer to select items on your display panel.
The TouchPad consists of a cursor control, a left and right button, and two scroll buttons. The
cursor control works the same way a mouse does, and moves the cursor around the display. It
only requires light pressure from the tip of your finger. The left and right buttons function the
same as mouse buttons. The actual functionality of the buttons may vary depending on the
application that is being used. Finally, the scroll buttons allow you to navigate quickly through
pages, without having to use the on-screen cursor to manipulate the up and down scroll bars.
Clicking
Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to
select, press the left button once, and then immediately release it. To right click, move the mouse cursor
to the item you wish to select, press the right button once, and then immediately release it. You also
have the option to perform the clicking operation by tapping lightly on the TouchPad once.
Double-Clicking
Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure
does not function with the right button. To double-click, move the cursor to the item you wish to
select, press the left button twice, and then immediately release it. You also have the option to perform
the double-click operation by tapping lightly on the TouchPad twice.
Dragging
Dragging means pressing and holding the left button, while moving the cursor. To drag, move the cursor
to the item you wish to move. Press and hold the left button while moving the item to its new location
and then release it.Dragging can also be done using the TouchPad. First, tap the TouchPad twice over the
item you wish to move making sure to leave your finger on the pad after the final tap. Next, move the
object to its new location by moving your finger across the TouchPad, and then release your finger.
Using the Scroll buttons allows you to navigate through a document quickly without using the
window's scroll bars. This is particularly useful when you are navigating through on-line pages.

www.modecom.eu
www.modecom.eu
17
ENGLISH
Clicking
Clicking means pushing and releasing a button. To left-click, move the cursor to the item
you wish to select, press the left button once, and then immediately release it. To right click,
move the mouse cursor to the item you wish to select, press the right button once, and then
immediately release it. You also have the option to perform the clicking operation by tap-
ping lightly on the TouchPad once.
Double-Clicking
Double-clicking means pushing and releasing the left button twice in rapid succession.This
procedure does not function with the right button. To double-click, move the cursor to
the item you wish to select, press the left button twice, and then immediately release it.
You also have the option to perform the double-click operation by tapping lightly on the
TouchPad twice.
Dragging
Dragging means pressing and holding the left button, while moving the cursor. To drag,
move the cursor to the item you wish to move. Press and hold the left button while mo-
ving the item to its new location and then release it. Dragging can also be done using the
TouchPad. First, tap the TouchPad twice over the item you wish to move making sure to le-
ave your nger on the pad after the nal tap. Next, move the object to its new location by
moving your nger across the TouchPad, and then release your nger.
Using the Scroll buttons allows you to navigate through a document quickly without using
the window’s scroll bars. This is particularly useful when you are navigating through on-line
pages.
Memory Module Upgrade
Your notebook PC comes with either 128MB of high speed Synchronous Dynamic RAM
(SDRAM) factory installed. To increase your notebook’s memory capacity (up to 2GB maxi-
mum), you may install an additional memory upgrade module. The memory upgrade must
be a dual-inline (DIMM) SDRAM module.
Do not remove any screws from the memory upgrade module compartment except for the
ones specically shown in the directions here.
Installing a Memory Module
To install a memory upgrade module follow these steps:
1. Turn o power to your notebook using the power switch, disconnect the power adapter,
and/or remove the battery pack.
2. Place your notebook upside-down on a clean work surface.

www.modecom.eu
www.modecom.eu
3. Open the top cover all the way, so that it is lying at on the work surface.
4. Remove the ve screws securing the compartment cover.
The memory upgrade module can be severely damaged by electrostatic discharge (ESD).
Be sure you are properly grounded when handling and installing the module.
5. Align the connector edge of the memory upgrade module, chip side up, with the connec-
tor slot in the compartment.
GETTING STARTED
20
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
Memory Module Upgrade
Your notebook PC comes with either 128MB of high speed Synchronous Dynamic RAM
(SDRAM) factory installed. To increase your notebook's memory capacity (up to 2GB maximum),
you may install an additional memory upgrade module. The memory upgrade must be a dual-in-
line (DIMM) SDRAM module.
Do not remove any screws from the memory upgrade module compartment except for the ones
specifically shown in the directions here.
Installing a Memory Module
To install a memory upgrade module follow these steps:
1. Turn off power to your notebook using the power switch, disconnect the power adapter, and/
or remove the battery pack.
2. Place your notebook upside-down on a clean work surface.
3. Open the top cover all the way, so that it is lying flat on the work surface.
4. Remove the five screws securing the compartment cover.
The memory upgrade module can be severely damaged by electrostatic discharge (ESD). Be
sure you are properly grounded when handling and installing the module.
5. Align the connector edge of the memory upgrade module, chip side up, with the connector slot
in the compartment.
6. Insert the memory upgrade module at a 45oangle and press it firmly onto the connector.
7. Press the memory upgrade module down into the compartment until it locks into the retaining
clips on either side. You will hear a click when it is properly in place.
8. Replace the cover and screws that were removed previously. Installation of the new memory
module is now complete.
The memory upgrade module is not something you routinely remove from your notebook PC.
Once it is installed, you should leave it in place unless you want to increase system memory
capacity.
6. Insert the memory upgrade module at a 45o angle and press it rmly onto the connec-
tor.
7. Press the memory upgrade module down into the compartment until it locks into the re-
taining clips on either side. You will hear a click when it is properly in place.
8. Replace the cover and screws that were removed previously. Installation of the new me-
mory module is now complete.
The memory upgrade module is not something you routinely remove from your notebook
PC. Once it is installed, you should leave it in place unless you want to increase system me-
mory capacity.
18

www.modecom.eu
www.modecom.eu
19
ENGLISH
TROUBLESHOOTING
Your notebook PC is sturdy and subject to few problems in the eld. However, you may en-
counter simple setup or operating problems that you can solve on the spot, or problems
with peripheral devices, that you can solve by replacing the device. The information in this
section helps you isolate and resolve some of these straightforward problems and identify
failures that require service.
Identifying the Problem
If you encounter a problem, go through the following procedure before pursuing complex
troubleshooting:
1. Turn o your notebook.
2. Make sure the AC adapter is plugged into your notebook and to an active AC power
source.
3. Make sure that any card installed in the PC Card slot is seated properly. You can also re-
move the card from the slot, thus eliminating it as a possible cause of failure.
4. Make sure that any devices connected to the external connectors are plugged in prop-
erly. You can also disconnect such devices, thus eliminating them as possible causes of fail-
ure.
5. Turn on your notebook. Make sure it has been o at least 10 seconds before you turn it
on.
6. Go through the boot sequence.
7. If the problem has not been resolved, contact your support representative.
Before you place the call, you should have the following information ready so that the cus-
tomer support representative can provide you with the fastest possible solution:
• Product name
• Product conguration number
• Product serial number
• Purchase date
• Conditions under which the problem occurred
• Any error messages that have occurred
• Hardware conguration
• Type of device connected, if any
See the Conguration Label on the bottom of your notebook for conguration and serial
numbers.

www.modecom.eu
20
www.modecom.eu
Processor (Yonah) • Pentium M P T5500 C2D 1.66G/667Mhz/
2M
• uFC-PGA Package 478 pins
BIOS • 1M BB Flash ROM
Chipset (Calistoga) • Intel 945GM+ ICH7M
Main Memory • Zero on board and two SO-DIMM me-
mory sockets
• 512M 667MHz DDR2 SDRAM
LCD Display • 15.4”TFT-LCDWXGA, 1280x800, 16.7M
colorsGlare type support
Graphics • Intel 945GM Integrated graphics con-
troller
• Intel Graphics Media Accelerator
(GMA) 950
CRT Display Modes •VGA 640x480, 256/64K/16.7M colors
• SVGA 800x600, 256/64K/16.7M colors
• XGA 1024x768, 256/64K/16.7M colors
• SXGA 1280x1024, 256/64K/16.7M colors
Hard Disk Drive • One 2.5”9.5mm IDE HDD 5400 rpm with
SATA 150 support
•80 GB SATA
Floppy Disk Drive • N/A
Optical Disk Drive • 8X DVD+/-RW
Modem • 56K Modem 1.5,V.90/92 support
PC Cards Slot • Express card support
LAN & WLAN • PCI-E Ethernet 10/100 or 10/100/1000
BaseT on board
• Support dual band antenna
• Intel® PRO/Wireless 3945ABG,
IEEE 802.11a+b+g
(PCI-E mini card interface)
Interface I/O Port • 1 IEEE 1394
• 3 Audio jacks: Headphone-out(SPDIF
Out), Mic-In, Line-in
• 1 CRT/ DVI
• 4 USB ports (v2.0)
• 1 S-Video out
• 1 RJ11 connector for Modem
• 1 RJ45 connector for Ethernet
Audio • Built-in High Denition Audio
(2 channel)
• Built-in two stereo speakers
• Dual array Microphone
Card Reader • Support Memory Stick(MS-Pro), Multi
Media Card, and Secure Digital(MS/MS
PRO/MMC/SD)
Mini card • One PCI-E Mini card
System Status
LED Button
• Power on/Suspend, Battery Charging,
Wireless LAN, Caps Lock, Number Lock,
HDD Access, Media reader
• 6 quick start buttons: Power button,
Internet, E-mail, Mute, Silence mode,
Wireless
Keyboard • 86/87/90-key withWindows func-
tion keys
Hot Keys on Keyboard Function Keys
• Fn+F1 Suspend switch
• Fn+F2Wireless Enable/Disable
• Fn+F3 LCD/CRT/LCD+CRT Switch
• Fn+F4 Brightness down
• Fn+F5 Brightness up
• Fn+F6 Mute
• Fn+F7Volume Down
• Fn+F8Volume Up
• Fn+F9 Media Play/Pause
• Fn+F10 Media Stop
• Fn+F11 Media Play Backward
• Fn+F12 Media Play Forward
Power Management • Full feature ACPI power management,
Stand-by, Suspend to Disk, Suspend
to RAM
• ACPI 2.0 supported with Intel SpeedStep
• Light sensor
Battery Pack & Life • Li-Ion 6 cells,2200mAh/cell
• Battery life up to 3 hrs (estimate)
AC adapter • Output: 19V DC, 3.42A, 65W
• Input: 100~240V AC, 50/60Hz Universal
Pointing Device • Built-in touch pad with 2-way scroll
function
• 2 click buttons
Dimensions/Weight • Dimensions:
355(W)x254.5(D)x25.5~35.2 (H)mm
•Weight:~2.7Kg (with 15.4”W TFT LCD,
Combo Driver, 6-cells)
Security • Kensington lock hole
OS & S/W •Windows XP/Vista , Linux
APPENDIX
Notebook Specications
20