Molekule Air Mini+ User manual

Molekule Air Mini+
User Manual

PLEASE READ AND SAVE
THESE INSTRUCTIONS

PLEASE READ AND SAVE
THESE INSTRUCTIONS

Try it in the bedroom.
Molekule Air Mini+ will work in any room, but giving it space in a central location,
and on a shelf, stand, or table will help maximize air intake. It’s designed for rooms
under 250 sq. ft. We recommend running it in the bedroom, closer to your bed at
night for a clean, sleep-breathing zone.
Run it 24/7.
Molekule Air Mini+ uses low energy to keep fresh air flowing.
01
Best practices

Setting up
02
With the base on a steady
surface, twist device shell
counterclockwise and lift
to open.
Unwrap filter and
place on base.
Align logo on shell with
arrow on base. Close shell
and twist to lock.

Unwind cord and
plug in.
Once the WiFi light is
pulsing white, you’re
ready to pair to the app.
Download the app to
complete setup and
enable device control
from your phone.

03
There’s just one button. It’s on top, in the center of the display. Tap it to wake the
device, and cycle through fan speeds and Auto Protect. A long press of 3 seconds
puts it on standby, which deactivates the fan, UV-A lights, and display lights.
Controls & interface
Press here
Auto Protect
Fan speeds
PECO-Filter status
Particulate matter levels
WiFi status

04
Modes & states
Auto Protect
Your Molekule Air Mini+ has a sensor to measure airborne particulate
matter levels. Auto Protect uses these levels to regulate fan speed for optimal
air purification.
Manual Mode
Your device’s five fan speeds correspond to the number of dotted white lights.
Tapping the button cycles through speeds, and Auto Protect.
Silent
Low
Medium
High
Boost
Speed Indicators

PECO-Filter status
The PECO-Filter Status Indicator helps you track the replacement schedule for your
PECO-Filter.
• Authentication
Each time you plug in your device or lock its shell into place, it checks
the authenticity of the PECO-Filter. A pulsing white filter light indicates
authentication has started. A green filter light indicates it’s confirmed as
a certified Molekule PECO-Filter and will run normally. A red filter light
indicates the PECO-Filter has not been verified and the device will not start.
• Off
If the PECO-Filter Status Indicator is off, there’s no need to replace your
PECO-Filter.
• Orange
An orange light indicates your PECO-Filter is nearing recommended
replacement time.