MonBaby Smart Button User manual

CLIPS TO
TYPICAL PAJAMAS
OR ONESIE
ANY
SMART WEARABLE BABY MONITOR
User manual
Gebruikershandleiding
Mode d’emploi
Gebrauchsanweisung
instruktsiya_0008_Eng.fra.nld.deu.indd 1 14.03.2019 12:28:51

2
ENG ENG
CONTENT
If you are having any issues with setting
up the device, please contact us at
[email protected]om.
WHAT’S IN THE BOX
QUICK START GUIDE
WARNINGS
CONNECTING TO THE APP
DOWNLOADING THE APP
USING THE APP
Calibration
Dashboard
Settings
FASTENING THE SMART BUTTON
REMOVING THE SMART BUTTON
REPLACING THE BATTERY
SAFETY AND OTHER IMPORTANT NOTES
LIMITED WARRANTY (EU AND OTHER
JURISDICTIONS; EXCLUDING CANADA AND THE US)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
3
4
5
6
7
7
7
8
8
10
10
10
12
15
6.1
6.2
6.3
instruktsiya_0008_Eng.fra.nld.deu.indd 2 14.03.2019 12:28:51

3
ENG ENG
CONTENT
If you are having any issues with setting
up the device, please contact us at
[e-mail].
WHAT’S IN THE BOX
© 2016 MonDevices Inc. All rights reserved. The MonBaby word mark and logo are trademarks
of MonDevices Inc. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered
in the U.S. and other countries. App Store is a service mark of Apple Inc. Android is a trademark
of Google Inc. The Android robot is reproduced or modified from work created and shared
by Google and used according to terms described in the Creative Commons 3.0 Attribution
License. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by MonDevices, Inc. is under license. IOS is a registered
trademark of Cisco Systems, Inc and/or its affiliates in the U.S. and certain other countries.
The MonBaby Retail Bundle includes
One (1) MonBaby Smart ButtonTM
One (1) MonBaby Smart Button Enclosure
Screwdriver and Batteries. Please ensure to insert the
provided battery into the device prior to first use by following
the «Replacing the Battery» directions on page 10 of this
manual. Keep the screwdriver and any extra batteries that
may be included with your MonBaby out of reach of children.
Supporting Documentation including the User Manual
1
2
3
4
MONBABY DOES NOT REPLACE PARENTING.
Your MonBaby product is a baby care aid, not a medical
device, and it is not intended to diagnose, treat, cure
or prevent any disease, including Sudden Infant Death
Syndrome (SIDS).
MONBABY IS A SMART WEARABLE BABY MONITOR AND
IS NOT INTENDED TO BE USED AS A TOY.
For instructions on how to electronically access
the IC ID, please visit www.mondevices.com
FCC ID: 2ADM2-MONB2
IC ID:12529A-MONB2
IFT #: RCPMOMO17-0279
IC
instruktsiya_0008_Eng.fra.nld.deu.indd 3 14.03.2019 12:28:58

4
ENG ENG
QUICK START GUIDE
Unpack the MonBaby Smart Button and insert the battery
(see the Replacing the Battery section of the manual
on page 10)
Download the MonBaby application from the AppStore
(Apple devices) or Google Play (Android devices)
Connect the MonBaby Smart Button to the MonBaby
application (see page 6 of the manual for detailed
instructions)
Calibrate the MonBaby Smart Button (see page 7 of the
manual for detailed instructions)
1
2
3
4
TROUBLESHOOTING & SUPPORT
If you are having any problems with
the setup or operation of your
MonBaby DO NOT RETURN THE
DEVICE, email our support team at
[email protected]om.
To find the latest version of the
MonBaby manual, please check out
the support page or our FAQ on
www.monbaby.com.
instruktsiya_0008_Eng.fra.nld.deu.indd 4 14.03.2019 12:28:58

5
ENG ENG
THIS DEVICE CONTAINS ELECTRICAL EQUIPMENT
THAT COULD CAUSE INJURY IF HANDLED
IMPROPERLY. IMPROPER HANDLING COULD ALSO
AFFECT THE PERFORMANCE OF THIS DEVICE:
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
disassemble your MonBaby product with the
exception of changing the battery of the device
according to the instructions provided.
leave the battery compartment door unscrewed
after changing the battery of the device and
always ensure that the battery compartment
screw is fully tightened.
use your MonBaby product if you are not able
to snuggly attach the device pursuant to the
instructions provided.
use your MonBaby product if the Smart Button
or enclosure is warped, cracked or otherwise
damaged.
place your MonBaby product in a dishwasher,
washing machine or dryer. Do not submerge
your Smart Button in water or wash it under a
faucet. Clean carefully with a clean, damp cloth.
expose your MonBaby product to extremely
high or low temperatures.
expose your MonBaby product to direct sunlight
for an extended period of time.
WARNING
instruktsiya_0008_Eng.fra.nld.deu.indd 5 14.03.2019 12:28:59

6
ENG ENG
CONNECTING TO THE APP
To make the setup process as quick as
possible, enable Bluetooth®on your
device before opening the MonBaby app
by accessing the Bluetooth option in your
phone’s ‘Settings’ menu.
When you first open the MonBaby app, you
are taken to the Connection Setup screen,
which lets you connect the MonBaby Smart
Button to the App.
If Bluetooth is already enabled on your
device, the Bluetooth icon on the left should
appear blue and you can proceed to the next
step. If the Bluetooth icon is grey, you can tap
it to enable Bluetooth on your phone.
Once the Bluetooth logo is blue, you are
ready to connect.
Tap the Connect button at the bottom of the
screen, and you should see a pop-up with
the detected MonBaby devices listed. A new
MonBaby will be listed as New Device. Tap
on the device name to complete the pairing.
The first time you pair the device, you will
be prompted to enter your baby’s name for a
personalized experience.
Once pairing is complete, you will be taken to the
Dashboard. If you are unable to connect the
MonBaby Smart Button to the App, please see our
Troubleshooting section or contact customer support
at [email protected]. Your device must support
Bluetooth®Smart technology that is available starting
with iOS®7 and AndroidTM 4.4.
instruktsiya_0008_Eng.fra.nld.deu.indd 6 14.03.2019 12:29:02

7
ENG ENG
USING THE APP
Once you have your MonBaby Smart Button
fastened and connected to the app, you can
use the app to monitor your baby’s sleeping
habits. You can see the details of the app
features below.
The calibrate screen should pop up after you
fasten the MonBaby Smart Button to your
child’s pajamas and connect the MonBaby
Smart Button to the app.
You can always re-calibrate by selecting
Calibrate from the slide-out menu.
Please wait until calibration is completed. If you close the
calibration window, you will exit the dashboard, and log off the
device.
Calibration
For best results, place the MonBaby Smart Button near
the center of your child between the child’s chest and
abdomen, with the baby lying on his or her back on a firm
sleep surface.
To download the Monbaby App, visit MonBabyApp.com using
your mobile phone browser, and you will be directed to the
iPhone App Store®or Google Play™ app listing.
You can also scan the QR Code on the right:
You can find our video manual located on our website:
https://monbaby.com/video-manual/
DOWNLOADING THE APP
instruktsiya_0008_Eng.fra.nld.deu.indd 7 14.03.2019 12:29:04

8
ENG ENG
Dashboard
Settings
Activity Bar
This bar shows you the activity level of your
baby
Status Visual
This image represents whether your baby is
sleeping on her stomach or back, and status
indicates the baby’s current status
Movement
‘Detected’ or ‘Idle’. Idle indicates if there is
no breathing movement detected within 15
seconds
Rollover
This tells you if your baby is on her back or stomach
Activity Status
Indicates if baby is waking up or fussing and shows activity is low,
medium or high
Real-Time Activity
The Real-Time Activity chart shows you your baby’s movement
activity for the past minute
Signal Level Indicator
The percentage of signal you have between your smart phone
and the MonBaby Smart Button
Battery Life Indicator
The percentage of battery remaining in the MonBaby Smart
Button and estimated remaining usage time
UUID
The unique identifying number of your MonBaby device.
instruktsiya_0008_Eng.fra.nld.deu.indd 8 14.03.2019 12:29:06

9
ENG ENG
Settings
MonBaby Name
View and edit the name associated with the
MonBaby Smart Button device
Breathing Movement Alert
Alerts you if there is a suspected stoppage
in breathing movement (absolutely no
motion)
Orientation Alert
Alerts you if the baby rolls over on to her
stomach
Activity Alert/High Activity Alert
Alerts you if the baby wakes up or, in the case of high activity
alert, adjusts the sensitivity level of the application when this
alert is used on the baby who is active.
Proximity Alert
Alerts you if the MonBaby Smart Button (and your child) is out of
range of your smart phone device
Fall Detection Alert
Alerts you if the baby has fallen
Battery Alert
Alerts you if the MonBaby battery is running low (please see
the Replacing the Battery» directions on the other side of this
manual).
LED
Enables the MonBaby’s light to turn red so that you are able to
locate it in the dark.
Additional Settings
The MonBaby application may contain additional settings from
time to time.
instruktsiya_0008_Eng.fra.nld.deu.indd 9 14.03.2019 12:29:08

10
ENG ENG
FASTENING THE SMART BUTTON
REMOVING THE SMART BUTTON
REPLACING THE BATTERY
Place the MonBaby Smart Button Enclosure on the inside of
your baby’s pajamas or onesie, with the convex side facing
your baby.
Align the MonBaby Smart Button on the outside of your
baby’s pajamas with the MonBaby Smart Button Enclosure,
and press it into the enclosure so that it is fastened to the
clothing.
To remove the MonBaby Smart Button, place your hand under
your baby’s pajamas and, using your index finger, push the smart
button out through the hole in the center of the Enclosure. Be
sure to have your other hand on the MonBaby Smart Button
to collect it after you push it out, and remove the Enclosure as
well. The MonBaby Smart Button can be stored inside of the
Enclosure, and is put into standby mode automatically when not
in use.
Occasionally, you will need to replace the MonBaby Smart Button
battery. You can always check the battery level by opening the
MonBaby App and checking the top center of the Dashboard
screen. To replace the CR2032 COIN CELL BATTERY in the
MonBaby Smart Button, follow the steps below:
1
2
For best performance, fasten the MonBaby at a location
nearest to the center, between the baby’s chest and
abdomen.
instruktsiya_0008_Eng.fra.nld.deu.indd 10 14.03.2019 12:29:09