Monogram ZIBS240 User manual

Owner’s
Manual
Bar Refrigerator
with Icemaker
ZIBI240
ZIBS240
monogram.com

2
Consumer Information
Bar Refrigerator with Icemaker
Introduction
Your new Monogram bar refrigerator with icemaker makes an eloquent statement of style,
convenience and kitchen planning flexibility. Whether you chose it for its purity of design
or the assiduous attention to detail, you will find that your Monogram bar refrigerator with
icemaker’s superior blend of form and function will delight you for years to come.
The information on the following pages will help you operate and maintain your bar
refrigerator with icemaker properly.
If you have any other questions, visit our Website at: monogram.com
Contents
Care and Cleaning........................................11, 12
Consumer Services...............................................19
Controls and Features...................................8–10
Model and Serial Numbers..................................2
Problem Solver................................................13–15
Product Registration...............................................2
Repair Service....................................................3, 19
Safety Instructions.............................................4–7
Warranty................................................Back Cover
Before
using
your bar
refrigerator
with
icemaker
Read this manual carefully. It is intended to
help you operate and maintain your new
bar refrigerator with icemaker properly.
Keep it handy for answers to your
questions.
If you don’t understand something or
need more help, there is a list of toll-free
consumer service numbers included in the
back section of this manual.
OR
Visit our Website at: monogram.com
Write
down the
model
& serial
numbers
You will find them on a label on the ceiling
inside the bar refrigerator with icemaker. Please write these numbers here:
Model Number
Serial Number
Use these numbers in any correspondence
or service calls concerning your bar
refrigerator with icemaker.

3
If you received
a damaged
appliance
The warranty does not cover damage
caused after delivery. Immediately contact the dealer (or builder) that sold you the bar refrigerator with
icemaker.
If you
need
service
To obtain service, see the Consumer
Services page in the back of this manual.
We are proud of our service and want you
to be pleased. If for some reason you are
not happy with the service you receive, here
are steps to follow for further help.
For customers in the USA:
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all
WKHGHWDLOV³LQFOXGLQJ\RXUSKRQHQXPEHU³
to:Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
For customers in Canada:
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all
WKHGHWDLOV³LQFOXGLQJ\RXUSKRQHQXPEHU
to:Manager, Consumer Relations
Mabe Canada Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
Consumer Information
Bar Refrigerator with Icemaker
After
installation
is completed
• Promptly inspect your new Monogram bar
refrigerator with icemaker. If it has been
damaged, contact the Installer or Dealer
immediately.
• This bar refrigerator with icemaker must
be properly leveled to ensure correct door
alignment, door closure and ice production.
Contact the Installer if the unit is not level.
• The unit should be centered in the
opening. In a standard 24” opening, the
front face of the Stainless Steel door will
be flush with adjacent cabinetry. The front
face of the Custom Panel door should be
1-31/44” forward of adjacent cabinetry.
Contact the installer if clearance is not
correct.
• Test the door swing. Carefully open and
close the door. The door should not rub
or catch on adjacent cabinetry. Notify the
installer if the door makes contact with
cabinetry.
Please Contact the Installer or Dealer if
you experience any of these problems.
Your custom panel (ZIBI240 model only) bar
refrigerator with icemaker is shipped with
two toekicks, a stainless steel and a black
toekick. For shipping purposes, one of the
toekicks will be secured to the back or on
the inside of the unit, and the second will
be installed on the unit. Keep the unused
toekick and other unused or removed parts
for possible future use.
Remove
packaging
Before using, be sure all packing materials
and tape have been removed.
To assure no damage is done to the finish of
the product, the safest way to remove the
adhesive left from packaging tape on new
appliances is an application of household
liquid detergent. Apply with a soft cloth and
allow to soak. Wipe dry and then apply an
appliance polish to thoroughly clean and
protect the surface.
Save time
& money
Before you request service, check the
Problem Solver in the back of this manual. It lists causes of minor operating problems that you can correct yourself.

4
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you
and others. All safety messages will follow the safety alert symbol and the word “DANGER”, “WARNING”,
or “CAUTION”. These words are defined as:
Indicates a hazardous situation which, if not avoided,will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,could result in minor or moderate injury.
WARNING
DANGER
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, explosion, electric shock, or injury when using your
refrigerator follow these basic safety precautions:
WARNING
REFRIGERATOR SAFETY INFORMATION
•Use this appliance only for its intended purpose as
described in this Owner’s Manual.
•This bar refrigerator with icemaker must be
properly installed in accordance with the
Installation Instructions before it is used.
•Do not allow children to climb, stand or hang on
the shelves in the bar refrigerator with icemaker.
They could damage the bar refrigerator with
icemaker and seriously injure themselves.
•Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
•Unplug your bar refrigerator with icemaker before
cleaning or making repairs. NOTE: We strongly
recommend that any servicing be performed by a
qualified individual.
•Before replacing a burned-out light bulb, the bar
refrigerator with icemaker should be turned OFF or
unplugged in order to avoid contact with a live wire
filament. (A burned-out light bulb may break when
being replaced.)
•Keep fingers out of the “pinch point” areas:
clearances between the door and between the door
and cabinet are necessarily small. Be careful closing
the door when children are in the area.
• In refrigerators with automatic icemakers,
avoid contact with the moving parts of the ejector
mechanism, or with the heating element that
releases the cubes. Do not place fingers or hands
on the automatic ice making mechanism while the
refrigerator is plugged in.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of injury when using your refrigerator, follow these basic safety
precautions.
CAUTION
WARNING RISK OF CHILD ENTRAPMENT
Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigeration products
are still dangerous…even if they will sit for “just a few
days.” If you are getting rid of your old appliance,
please follow these instructions to help prevent
accidents.
Before You Throw Away Your Old Refrigeration
Product:
•Take off the doors.
•Leave the shelves in place so that children may not
easily climb inside.
State of California Proposition 65 Warnings:
WARNING This product contains one or more chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.

IMPORTANTESINSTRUCTIONS DESÉCURITÉ
LIREETCONSERVERCESINSTRUCTIONS
5
IMPORTANTES CONSIGNES DE SÉCURITÉ
Pour réduire le risque d’incendie, d’explosion, de choc électrique ou de blessures
lorsque vous utilisez votre réfrigérateur, veuillez suivre ces consignes de sécurité :
AVERTISSEMENT
Ce symbole représente une alerte de sécurité. Ce symbole vous avise de dangers possibles pouvant causer
la mort, des blessures ou autres. Tous les messages de sécurité seront précédés du symbole d’alerte de sécurité
ainsi que des mots « DANGER », « AVERTISSEMENT » ou « MISE EN GARDE ». Ces messages sont les suivants :
Signale une situation qui présente un danger imminent et qui, si elle n’est pas évitée, entraînera des blessures
graves, voire la mort.
Signale une situation qui présente un danger imminent et qui, si elle n’est pas évitée, peut entraîner des
blessures graves, voire la mort.
.
Signale une situation qui présente un danger imminent et qui, si elle n’est pas évitée, peut entraîner des
blessures mineures ou graves.
CONSIGNES DE SÉCURITÉ POUR LE RÉFRIGÉRATEUR
AVERTISSEMENT
DANGER
MISE EN GARDE
•N’utilisez l’appareil que pour son usage prévu,
comme décrit dans le présent manuel.
•Installez le réfrigérateur de bar avec machine
à glaçons conformément aux directives
d’installation avant de l’utiliser.
•Ne laissez pas les enfants grimper, s’asseoir,
se tenir debout ni se pendre aux clayettes du
réfrigérateur de bar avec machine à glaçons. Ils
pourraient endommager le réfrigérateur de bar
avec machine à glaçons et se blesser gravement.
•N’entreposez et n’utilisez pas d’essence ou autres
vapeurs et liquides inflammables à proximité de cet
appareil ou de tout autre appareil électroménager.
•Débranchez votre réfrigérateur de bar avec
machine à glaçons avant de le nettoyer et de le
réparer. REMARQUE : Nous vous recommandons
vivement de confier toute réparation à un technicien
qualifié.
•Avant de remplacer une ampoule grillée, le
réfrigérateur de bar avec machine à glaçons doit
être débranché afin d’éviter tout contact avec un
fil sous tension. (Une ampoule grillée peut se briser
pendant l’opération).
• Éloignez les doigts des parties du réfrigérateur où
l’on peut facilement se pincer : les espaces entre
les portes et entre les portes et les placards sont
toujours étroits. Soyez prudent lorsque vous fermez
les portes de l’appareil en présence des enfants.
• Si votre réfrigérateur est doté d’une machine à glaçons
automatique, évitez le contact avec les pièces mobiles
du mécanisme éjecteur, ou avec l’élément chauffant
qui libère les glaçons. Ne posez pas les doigts ou les
mains sur le mécanisme de la machine à glaçons
automatique pendant que le réfrigérateur est branché.
IMPORTANTES CONSIGNES DE SÉCURITÉ
Pour réduire le risque de blessures lorsque vous utilisez votre réfrigérateurde , veuillez
suivre ces consignes de sécurité.
ATTENTION
AVERTISSEMENT RISQUESPOURLESENFANTS
Les enfants pris au piège ou morts d’asphyxie sont
toujours d’actualité. Les appareils de réfrigération
abandonés sont toujours aussi dangereux, même si
on n’attend que “quelque jours” pour s’en débarasser.
Si vous ne gardez pas votre ancien appareil, veuillez
suivre les directives ci-dessous afin de prévenir les
accidents.
Avant de vous débarasser de votre vieux appareil de
réfrigération :
•Démontez les portes.
•Laissez les clayettes en place afin d’empêcher les
enfants de grimper à l’intérieur.
Advertencias de la Proposición 65 del Estado de California:
ADVERTENCIA Este producto contiene uno o más químicos que el Estado de California entiende que producen cáncer y
defectos en el nacimiento u otros daños reproductivos.

6
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
CONNECTING ELECTRICITY
WARNING Electrical Shock Hazard.
Plug into a grounded 3-prong outlet
Do not remove the ground prong
Do not use an adapter
Failure to follow these instructions can result in death, fire, or electrical shock.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
Do not use an adapter.
Use of a GFI (Ground Fault Interrupter) is not
recommended for the bar refrigerator with icemaker.
The refrigerator should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house
wiring circuits which could cause a fire hazard from
overheated wires.
Never unplug your refrigerator by pulling on the power
cord. Always grip plug firmly and pull straight out from
the outlet.
Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do not use
a cord that shows cracks or abrasion damage along its
length or at either end.
When moving the refrigerator away from the wall, be
careful not to roll over or damage the power cord.
REFRIGERANTS
DO NOT USE AN ADAPTER
PLUG TO CONNECT THE
BAR REFRIGERATOR WITH
ICEMAKER TO A 2-PRONG
OUTLET.
All refrigeration products contain refrigerants, which
under federal law must be removed prior to product
disposal.
If you are getting rid of an old refrigeration product,
check with the company handling the disposal
about what to do.

7
IMPORTANTESINSTRUCTIONS DESÉCURITÉ
CONSERVEZCESDIRECTIVES
LIQUIDES FRIGORIGÈNES
Ne coupez pas ou n’enlevez pas, sous aucun prétexte, la troisième broche de mise à la terre du
cordon d’alimentation. Pour des raisons de sécurité, cet appareil doit être correctement mis à la terre.
Le cordon d’alimentation de cet appareil est équipé
d’une fiche à trois broches (pour une mise à la terre)
qui s’adapte à la prise de courant standard à 3 broches
(pour une mise à la terre) pour minimiser les risques de
chocs électriques par cet appareil.
Faites vérifier la prise murale et le circuit électrique par
un électricien qualifié pour s’assurer que le système est
correctement mis à la terre.
Dans le cas d’une prise biphasée, l’installateur a la
responsabilité et l’obligation de la remplacer par une
prise triphasée correctement mise à la terre. N’utilisez
pas d’adaptateur.
L’utilisation d’un disjoncteur de fuite à la terre est
recommandée pour le réfrigérateur de bar avec
machine à glaçons.
Le réfrigérateur doit toujours être branché à sa propre
prise électrique d’une tension nominale correspondant
à celle indiquée sur sa plaque signalétique. Ceci
permet d’obtenir un meilleur rendement et évite de
surcharger les circuits électriques du domicile qui risque
d’occasionner un incendie en surchauffant.
Ne débranchez jamais le réfrigérateur en tirant sur le
cordon d’alimentation. Prenez toujours fermement la
fiche en main et tirez pour la sortir de la prise.
Réparez ou remplacez immédiatement tout cordon
électrique usé ou endommagé. N’utilisez pas un
cordon fissuré ou présentant des dommages dus aux
frottements soit sur sa longueur ou aux extrémités.
Lorsque vous éloignez votre réfrigérateur du mur,
faites attention à ne pas le faire rouler sur le cordon
d’alimentation afin de ne pas l’endommager.
BRANCHEMENTS ÉLECTRIQUES
AVERTISSEMENT Risque de choc électrique.
Branchez l’appareil dans une prise triple avec terre.
Ne retirez pas la broche de terre.
N’utilisez pas d’adaptateur.
Le non-respect de ces instructions peut entraîner des risques d’incendies, des chocs électriques ou la mort.
Tous les appareils de réfrigération contiennent des
refrigerants qui, conformément aux lois fédérales,
doivent être enlevés avant toute élimination de
l’appareil.
Si vous vous débarrassez de vieux appareils de
réfrigération, vérifiez, auprès de la société qui s’occupe
de leur élimination, ce que vous devez faire.
N’UTILISEZ JAMAIS UNE PRISE
À ADAPTATEUR POUR LE
RÉFRIGÉRATEUR DE BAR AVEC
MACHINE À GLAÇONS À UNE
PRISE BIPOLAIRE.

Controls and Features
Bar Refrigerator with Icemaker
Temperature
control
The temperature display shows the actual
temperature of the bar refrigerator with
icemaker. The actual temperature may vary
slightly from the set temperature based on
factors such as door openings, amount of
food and room temperature.
To change the temperature setting,
press the WARMER or COLDER pads until
you reach the desired set temperature.
After 5 seconds, the display will return to
the actual temperature.
After making adjustments, allow 12 to 24
hours for the bar refrigerator with icemaker
to reach the temperature you have set and
before making any further adjustments.
Temperature Settings
Minimum: 34°F (1.1°C)
Maximum: 45°F (7.2°C)
8
Unit ON/OFF
This pad stops cooling in the bar refrigerator
with icemaker, turns off the temperature
controlsandremovespowertothelightcircuit.
NOTE: The icemaker is on a separate on/off
switch. To remove power from the icemaker
See Automatic Icemaker section.
Press this pad for a minimum of 3 seconds
to turn the bar refrigerator with icemaker on
or off, or unplug the unit for long vacations
or absences, or when cleaning the unit or
changing the light bulb.
Glass
shelves
Tempered glass shelves in the bar
refrigerator with icemaker are removable for
easy cleaning or for storing larger items.
To remove a shelf, open the door
completely to avoid potential damage to
the gasket. Lift up on the back of the shelf
slightly. Tilt the shelf to one side at an angle
while pulling forward.
To replace a shelf, open the door completely
to avoid potential damage to the gasket.
Tilt the shelf to one side at an angle and
slide toward the back wall, placing one side
onto the shelf support. Place the other side
onto the opposite shelf support. Ensure rear
locking tabs are engaged. When installed
properly, the shelf will not slide forward
when gently pulled.
To remove, lift up on the back of the shelf Tilt the shelf at an angle while removing
or replacing Place in slots when replacing the shelf
Appearance may vary
NOTE: The icemaker temperature is not displayed.
Child control
lockout
This child control lockout feature prevents
unwanted changes to your temperature
settings.
After the desired temperature is set, the
temperature can be locked. To lock, press
both the +and –pads at the same time for
five seconds. To unlock, press both +and –
pads for five seconds.

9
Controls and Features
Bar Refrigerator with Icemaker
Automatic
icemaker
The icemaker will produce seven cubes
SHUF\FOH³DSSUR[LPDWHO\²
cubes in a 24-hour period, depending on
freezer compartment temperature, room
temperature, number of door openings and
other use conditions.
If the bar refrigerator with icemaker is
operated before the water connection is
made to the water valve, set the icemaker
power switch to O (off).
When the unit has been connected to
the water supply, set the icemaker power
switch to I (on). The green light will come on.
The icemaker will fill with water when it
cools to 15°F (–10°C). A newly installed bar
refrigerator with icemaker may take 12 to
24 hours to begin making ice cubes.
You will hear a buzzing sound each time the
icemaker fills with water.
Throw away the first few batches of ice to
allow the water line to clear.
Be sure nothing interferes with the sweep of
the feeler arm.
When the bin fills to the level of the feeler
arm, the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes
will become cloudy, taste stale and shrink.
If ice cubes get stuck in the icemaker, the
green power light will blink. To correct this,
set the icemaker
power switch to O
(off) and remove
the cubes. Set the
icemaker power
switch to I (on)
to restart the
icemaker.
After the icemaker
has been turned
on again, there will be a delay of about
45 minutes before the icemaker resumes
operations.
NOTE: In homes with lower-than-
average water pressure, you may hear
the icemaker cycle multiple times when
making one batch of ice.
CAUTION Avoid contact with the
moving parts of the ejector mechanism, or
with the heating element that releases the
cubes. Do not place fingers or hands on the
automatic ice making mechanism while the
refrigerator is plugged in.
ATTENTION Évitez le contact avec
les pièces mobiles du mécanisme éjecteur,
ou avec l’élément chauffant qui libère les
glaçons. Ne posez pas les doigts ou les mains
sur le mécanisme de la machine à glaçons
automatique pendant que le réfrigérateur est
branché.
Icemaker
Feeler Arm
Green
Power Light
Power Switch
Ice storage
bin
To remove, pull the icemaker drawer fully
open and remove the transportable ice
storage bin by lifting up and out.
NOTE: Ice can fall behind the ice storage bin.
Prior to replacing the bin, check for any fallen
ice.
If the ice storage bin is removed from the
refrigerator for an extended period of time,
we recommend setting the icemaker power
switch to O (off).
To replace, grasp the side of the right side
of the bin with the higher edge so that the
angled side is against the drawer front.
Lower the bin into place and close the
drawer.
CAUTION: Failure to install properly could
cause potential damage to the icemaker.
The ice storage bin is dishwasher safe, top
rack only.

The interior fan is located in the rear wall
of the bar refrigerator with icemaker and
is designed to run continuously to help
maintain the proper cooling temperature.
In most instances, the interior fan will run
when the door is open. However, it will not
operate when the door is opened during a
defrost cycle.
Controls and Features
Bar Refrigerator with Icemaker
10
Loading
tips and
suggestions
The bottom full extension drawer holds
five bottles and is loaded with necks facing
the rear. Tall bottles should not be loaded
on the bottom drawer because they may
prevent the door from closing.
•Do not block the thermistor, located on
the right hand side, just above the top
shelf of the bar refrigerator with icemaker.
Blocking the thermistor could impair the
air circulation and temperature control.
Bottom drawer arrangement
Removing
full extension
drawer
To remove:
1. Pull the full extension drawer out to the
STOPposition.
2. Push the tab on right drawer guide down
while pulling the tab on left guide up, and
pull the drawer out.
To replace:
1. Push the drawer slide arm back into the
unit.
2. Pull the small slide sub-assembly
completely forward.
3. Insert the sides of the drawer back into
the guides.
4. Push until the tabs lock into place.
Tab (push tab down on right
drawer guide, pull tab up on
left drawer guide)
NOTE: Make sure the tabs on the full
extension drawer guides are fully engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and
push back in several times to make sure
locking tabs are properly engaged.
To replace, push drawer slide
arm back into unit Pull small slide sub-assembly completely forward
Appearance may vary
Interior fan
Ice scoop
The bar refrigerator with icemaker includes
an ice scoop in the ice storage bin. To
maximize ice bin capacity, store the ice
scoop as shown. Do NOT wash the ice scoop
in the dishwasher. For cleaning, handwash
in mild soapy water or use the baking soda
solution noted in Cleaning the inside section.
Sub-assembly Sub-assembly