montpellier MON-CT251 User manual

Installation and Operating Instructions
Models: MON-CT251
MON-CT451 & MON-CT785
30cm, 60cm and 77cm Ceramic Hobs
Please read these instructions carefully before attempting to install or use this appliance.
It is advisable to keep these instructions in a safe place for future reference.
N.B. Should your appliance require attention, our service agents will not be able to book
a service call without your unique serial number which can be found on the last page of
this manual.
(Pictures indicative of models supplied)

2
In
t
roduc
t
ion
Thank you for choosing this Montpellier branded appliance.
It has been designed to give years of trouble-free use provided
it is installed and maintained correctly.
Please read these instructions carefully before installing or
using your appliance. It is advisable to keep your purchase
and
installation receipts with these instructions in a safe place for
future reference. Included is some important safety informat
ion
in addition to guidelines and recommendations that will enab
le
you to take full advantage of all the functions available.
This quality appliance has been tested and certified to meet all
applicable UK electrical and safety standards.
This appliance must be installed and connected in
accordance with current regulations.
After unpacking the appliance ensure that there is no visible
damage. If the appliance has been damaged during transit, do
not use it, contact your retailer immediately.

3
Your 2 year Manufacturer's guarantee
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Your new Montpellier appliance carries a free guarantee which
protects you against the cost of repairs during the first 24 months
from date of purchase provided that:
Any claim is accompanied by evidence of the model reference,
model serial number and proof of purchase, such as a Sales Receipt,
showing that the appliance was purchased within the 24 months prior
to the date of claim.
What is not covered under the Guarantee:
Any appliance not correctly installed and operated in accordance
with the manufacturer's instructions.
Any appliance that is used for anything other than domestic
purposes.
Any defect caused by accident, misuse, unauthorized modification
or inexpert repair.
Cost of Call-out where a fault cannot be found with the appliance.
Cost of Call-out for work covering routine maintenance, such as, but
not exclusively, cleaning of filters or defrosting.
Cost of Call-out for work required to correct the alignment of doors
following door reversal procedures carried out by you.
Use of the appliance by anyone other than the Householder.
Use in any commercial environment.
Consumable items, such as, but not exclusively, fuses in plugs,
bulbs and breakable items which require routine replacement.
Repair costs incurred that have not been authorised by Repairtech
and/or carried out by a non-approved Repairtech engineer.
YOUR GUARANTEE IS VALID ONLY IN THE UK.
To Register your Appliance simply complete the card in your appliance pack and
return it with a stamp affixed or Alternatively you can Register online at
www.repairtechuk.com
SERVICE HELP-LINE
Should your appliance develop a fault, please call the
Repairtech Service Helpline on:
01527-888133

4
Description
Of
The
Appliance
a) MON-CT251
1. 1200W Cook Zone
2. 1800W Cook Zone
3. Function Controls
4. Ceramic Glass Plate
1.
2.
3.
4.

5
b) MON-CT451
1. 1200W Cook Zones
2. 1800W Cook Zones
3. Function Controls
4. Ceramic Glass Plate
1.
2.
4.
3.
1.
2.

6
c) MON-CT785
1. 1200W Cook Zones
2. 1800W Cook Zones
3. 2200/1000W Cook Zone
4. Function Controls
5. Ceramic Glass Plate
2.
1.
2.
4.
3.
1.
5.

7
CONTENTS:
Section 1. Installation
Sect
i
o
n 2.
Safety
A
d
v
i
ce
Section 3. Operating the Appliance
Section 4. Maintenance

8
Section 1. Installation
-Remove all packaging, protective film and securing tape from
the appliance.
-Position the appliance in a dry atmosphere.
-The following dimensions are provided as a guide for
installation – your installer will carry out the installation in
accordance with the current regulations.
-Your installer will connect the power cable in accordance with
the current regulations.
To install this appliance, please proceed as follows:
1.1. Work-Surface Cut-Out
-Cut out the work-top as shown in the drawing below, ensuring
that the actual sizes used are as per the chart below.
-For installation and use, a minimum of 5cm must be
maintained around the cut-out.
-The work surface must have a thickness of at least 30mm.
-The work surface must be heat resistant.
1.1.1. MON-CT251

9
A B C D E F
268＋4
-0 mm
500＋4
-0 mm
50mm mini 50mm mini 50mm mini 50mm mini
1.1.2. MON-CT451 & MON-CT785
1.2. Space to Rear or Side Wall
A = 760mm B = 50mm (min) C = 20mm (min)
D = Air Gap/Intake E = Air Exit (5mm)

10
1.3. Fixing Brackets
-Fix the brackets as shown below:
a) Screw b) Bracket c) Screw Hole d) Base of hotplate