MOPIKO K1-A User manual

Product Manual
Model: K1-A
SONIC ELECTRIC
TOOTHBRUSH
6
months

(This instruction manual applies to
various color versions of the device.)
TABLE OF CONTENTS
1 INTENDED USE
2 TECHNICAL DATA
3 SAFETY INSTRUCTIONS
4 EXPLANATION OF SYMBOLS
5 OVERVIEW
6 SET CONTENTS
7 USE
8 CLEANING
9 REPAIR
10 STORAGE AND TRANSPORT
11 DISPOSAL
12 CE DECLARATION
13 WARRANTY
6
months
Model: K1-A
SONIC ELECTRIC
TOOTHBRUSH

The sonic toothbrush is intended to be used solely by adults for
oral care.
It is intended for private indoor use only. It must not be used
for professional purposes. It is not intended for industrial
or commercial use. It must not be used at healthcare or
veterinary facilities.
Following the instructions in this manual will ensure safe
installation and use of the product.
Model K1-A
Power 1.5V
Power supply 5 V 1 A USB
Battery 3.7 V 1000 mAh
IP class IPX7
No. of strokes 28 000 – 39 000 rpm
No. of cleaning programs 6
Charging type wireless
Charging time Approx. 12 hours
Operation time at full charge 30 days, 2 times a day,
for 2 minutes each
Operating and charging
temperature range 0-40°C
Cleaning time indication
2 minutes (4 x 30
seconds) for programs
1-5,
3 minutes (4 x 45
seconds) for program 6
1 INTENDED USE
2 TECHNICAL DATA

1. Read this manual as a whole before using the product.
Failure to observe the manual may result in injuries,
other property.
2. Meaning of the symbols used in the manual:
Danger! Indicates a dangerous situation,
which, if occurs, will result in major injuries.
Warning! Indicates a dangerous situation,
which, if occurs, may result in major injuries.
Caution! Indicates a dangerous situation,
3. The device should not be used or
maintained by children younger than 8 or by
individuals with limited mental, intellectual,
or physical abilities, unless such individuals
are supervised or have been instructed how
to use the device safely, in compliance with
the instruction manual, and understand the
hazards involved.
4. The device is not a toy. Children must not
play with the device. Children must not
clean or perform maintenance of the device
unless they are supervised by an adult.
5. The device can only be powered with low
voltage electric current matching the
markings on the device.
6. Unplug the power supply plug prior to
assembly, cleaning, or maintenance of the
device components.
7. The charging base power cord is not
replaceable. If the power cord becomes
damaged, do not attempt to repair it, but
replace the charging base with a new one
instead. Remember to replace the charging
base with an original one to avoid hazards.
8. Warning! Do not use any other charging base to charge
the device. Moreover, do not use the charging base
included for charging other products, otherwise burns
9. Warning! Clean the power supply plug regularly to
avoid dust accumulation. If this happens, moisture
3 SAFETY INSTRUCTIONS

Disconnect the power supply, and then wipe the plug
clean with a dry cloth.
10. Do not use the device for any purpose other than its
intended use.
11. The device is intended solely for private indoor use. It
is not suitable for commercial, industrial, medical, or
veterinary applications.
12. Do not use the device in locations where the use of
electrical devices are forbidden, and where it could result
in harmful interference or other hazards.
13. Do not turn on or use the device in the vicinity of
flammable materials.
14. Do not use the device for cleaning other surfaces than
teeth, gums, and tongue.
15. Warning! Keep the device out of the reach of children
and infants. Do not allow children and infants to use
the product on their own. Otherwise, it may result in an
accident or injury caused by accidental swallowing or
16. Danger! Regularly check the toothbrush head for
cracks. A broken toothbrush head may pose a risk of
choking.
17. Warning! Discontinue using the product if any of its
parts are damaged (the head, the device body, the
charging base).
18. Warning! If a failure occurs during operation, turn off
shock may occur.
19. Warning! If one of the following faults or failures
occurs:
–the device or the charging base are deformed or
excessively hot
– the device or the charging base gives off a burning
odor
–the device or the charging base emit abnormal
sounds during operation or charging, discontinue using
and contact the service facility.
20. Prior to using the product, consult a dentist if any of
the following circumstances apply to you:
–an oral surgery performed within the last 2 months,
–an implanted pacemaker or another device in the
body,

–gum bleeding when using the product,
–any other medical conditions.
21. Caution! Individuals with severe periodontal disease,
history of tooth disorders, or suspected oral cavity
disease should consult a doctor prior to using the
device, as the toothbrush may cause discomfort to the
teeth and gums.
22. Caution! Individuals with a sensitive oral cavity should
not use the product.
23. Caution! Do not press the toothbrush head against the
teeth or gums too strongly, do not clean for a prolonged
period of time.
24. Caution! Do not share the toothbrush with your family
members or other persons, as it may result in injuries to
the teeth and gums.
25. When using the device, make sure that next to the brush
location there are no items which may get damaged,
broken, or overturned.
26. The charging base power cord should be routed so that
it does not touch very hot objects. The cord should not
be exposed to crushing, pulling, or other damages.
27. The charging base power cord should not hinder the
movement of people and pets, as one might trip over it,
fall down, and suffer bodily injuries.
28. Danger! Do not clean the charging base when it is
connected to the power source.
29. Do not clean the device or the charging base using
strong cleaning agents, solvents, etc.
30. Do not expose the charging base and its power cord to
water and other liquids, as it may negatively affect the
operation and life of the device components, result in a
short circuit, or even electric shock.
31. Danger! Do not immerse the device or the charging
base in water.
32. Caution! When the charging base remains unused,
disconnect it from the power source. Otherwise, a
leaking battery can hinder the insulation properties and
33. Caution! Do not put any metal objects, such as coins
or paperclips, on the charging base, as it may cause
injuries.
34. Danger! Prior to plugging in the charging base, make
sure it is completely dry.

35. Warning! Prior to plugging in, make sure the charging
base operating voltage matches its rated voltage.
36. Danger! The product includes a built-in battery. Do
not damage or destroy the battery, do not put it into
temperature. When exposed to high temperature, the
37. Avoid exposing the battery to very low or very high
temperatures (below 0°C/32°F or above 40°C/104°F).
Extreme temperatures can negatively affect the battery
capacity and lifespan.
38. Avoid exposing the battery to contact with liquids and
metal items, as it may partially or completely damage
the battery.
39. Warning! Do not remove or open the battery, otherwise
40. Warning! The battery may only be removed prior to the
battery in a special container.
41. Warning! Do not disassemble the device except for
injuries.
42. Protect the device against vibration and shock during
transport.
43. Keep the user’s manual and the packaging, if possible.
44. If the device is passed on to another user, it must be
accompanied by this manual.
45. You may request the user’s manual in the electronic
version at: [e-mail] .
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
nterference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician
for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in fixed/mobile(min20cm) exposure
condition without restriction.
Warning: Changes or modifications to this unit not expressly
approved by the part responsible for compliance could void
the user’s authority to operate the equipment.
The operation of the device is safe according to the results of
correctly and uses it in compliance with the
recommendations in the instruction manual.

4
Read the manual.
The product is compliant with the
requirements of the applicable EU
directives.
The device is intended for indoor use only.
Disposal of waste electrical and electronic
equipment — see the DISPOSAL section
of this manual.
Instructions for the disposal of batteries:
see the DISPOSAL section.
Ingress protection rating of the electrical
device. The marking consists of the
which denotes solid particle protection,
and the second denotes liquid ingress
protection.
X – no protection level against solids has
7 – protection against the results of short-
term immersion in water (30 min to the
depth of 0.15 m above the enclosure top
or 1 m above the bottom for enclosures
lower than 0.85 m)
S
E
G
R
E
G
U
J
O
D
P
A
D
Y
The symbol indicating that the manufacturer
has made a financial contribution to
the development and operation of
a packaging materials recovery and
recycling system.
P
A
P
I
E
R
Symbol of the relevant waste bin for the
box – PAPER.
OVERVIEW
EXPLANATION OF SYMBOLS

P
L
A
S
T
I
K
/
M
E
T
A
L
Symbol of the relevant waste bin for the
moulded tray – PLASTIC/METAL.
F
O
L
I
A
P
L
A
S
T
I
K
/
M
E
T
A
L
Symbol of the relevant waste bin for the
foil – PLASTIC/METAL.
Symbols printed monochromatically are for reference
purposes only.
1. Toothbrush head
2. Toothbrush body
3. On/off/brushing program switch
4. LED charging indicator and brushing program display
5. Induction charging base with US cable
6. Metal shaft – toothbrush head installation place
7. Travel case
5 OVERVIEW
1
2
3
4
5
7
6

Open the packaging and carefully take the device out. Make
sure the set is complete and intact. Check that the plastic parts
are not broken and that the power cord is not damaged. If you
the vendor and do not use the device. Keep the packaging or
dispose of it in accordance with local regulations.
Caution! For the sake of children’s safety, do
not leave any packaging materials accessible
and unattended (plastic bags, cardboard
boxes, Styrofoam, etc.). Risk of suffocation!
Quantity Item
4Toothbrush head
1Sonic toothbrush – body
1Induction charging base
1Travel case
1Instruction manual
6 SET CONTENTS
7 USE
7.1 Charging
long period of not using it (3 months or longer).
CAUTION! Prior to handling the charging base and charging
the battery in the device, make sure your hands, the device, and
the charging base are completely dry.
Gently unwind the charging base power cord and put the
base on a stable, level surface, so that the cord can reach the
charging socket.
Connect the charging base USB cord plug to a charging
socket, e.g., in a computer, or to a mains adapter, such as
one typically included with a phone / smartphone / tablet
and equipped with a USB socket providing the recommended
charging parameters: 5 V 1 A.

Put the device on the charging base. It will take about
12 hours to fully charge the device.
The optimal ambient conditions for charging are 0-40°C.
When the ambient humidity or temperature is too low or too
high, the battery may not be charged correctly.
The device heats up during charging and operation, it is
normal.
The LED charging indicator flashes slowly and rhythmically
during charging.
Once the battery is completely charged, the LED indicator will
illuminate with steady light.
When the battery is about to be discharged, the LED indicator
will flash rapidly to remind about the need to charge.
toothbrush on the charging base whenever the brush is not
being used. This will not result in overcharging.
7.2 Brush head installation / replacement
CAUTION! It is only allowed to assemble and disassemble the
set components when the device is turned off.
Perform all the actions gently in order not to damage the
set components.
Prior to and after using the device, check each component
for damage. Damaged parts must not be used as it may
result in bodily injuries to the user.
To assemble the brush head, put its opening on the metal shaft
protruding from the toothbrush body, so that the bristles point
to the same direction as the on/off switch and LEDs on the
brush body. Firmly press both parts against each other.
To remove the tip, pull it up gently until it disconnects from the
toothbrush body.
It is recommended to change the brush head every 2 months
to prevent excessive growth of bacteria.
If the bristles or tip are worn, they may damage the teeth or
injure the gums.
7.3 Turning the device on/off / cleaning modes –
brushing programs
To turn the device on, press the on/off/program toggle switch.
The brush will start working in the Clean mode – the top LED
indicator will light up.
When the button is pressed consecutively and quickly (at
intervals up to 3 s), each press will toggle the next brush
operation mode in the following sequence:

1. Clean – standard cleaning mode – the top
LED indicator is lit.
2. Polish – mode used for teeth brightening
and polishing – the lower right LED
indicator is lit.
3. Massage – mode used for gum massaging
after a standard brushing session (intended
for healthy gums) – the lower left LED
indicator is lit.
4. Whitening – the whitening mode removes
discoloration, brightens, and polishes the
teeth – the top and lower right LEDs are lit.
5. Sensitive – a very gentle mode for sensitive
teeth and gums – both lower LEDs (right
and left) are lit.
6. Long Clean – a 3-minute program for
longer brushing – the top and lower left
LEDs are lit.
Press the button for the last time to turn off the brush – all
the LEDs turn off.
If you wait for longer than 3 seconds after selecting a brushing
mode, pressing again will turn off the brush. If you turn on the
brush again within a short interval, it will start in the previously
selected mode.
To change the operation mode at this time, press the on/
off/toggle switch quickly over and over, until you select the
The brush has a built-in timer. After each 30-second period,
it will inform with a small pause that the time has elapsed.
A standard cleaning session is designed for 4 such intervals,
2 minutes of brushing in total.
7.4 Brushing the teeth
For more optimal use of the sonic toothbrush, it is recommended
to follow the guidelines below.
Put a portion of your favourite toothpaste on the tip bristles.
In case of sonic toothbrushes, the toothpaste portion may be
smaller compared to standard brushes. Point the brush bristles

at an angle of 45 degrees, so that the bristles can clean the side
surfaces of the teeth and gums.
Run the brush tip slowly, pressing it very gently against the
surface of the teeth and the line where the teeth connect with
the gums.
The standard brushing cycle lasts 4 x 30 s. It is recommended
to divide the surfaces of the teeth to brush each of them for 30
s – the top (front and back) and the bottom (front and back).
Then clean the contact surfaces of the upper and lower jaw
teeth. The brush will remind you to change the surface every 30
seconds by pausing for a moment.
bleed slightly (this happens rarely), or you may feel discomfort
(this is common in individuals who have not used mechanical
toothbrushes before). It usually happens when the gums are
not used to the new brushing technique and the high vibration
speed.
If this occurs, it is recommended to use the “Sensitive” program.
If after 2 weeks of using the brush as recommended the gums
keep bleeding, discontinue using the device and consult a
specialist doctor – a dentist.
The set includes a travel case for the toothbrush and up to 2
tips.
To place the toothbrush in the case, remove the dry brush tip
and place it in the case compartment. Place the dry brush body
in the case so that the parts match the moulded shapes inside.
Close the case.

8 CLEANING
8.1 General rules
Proper and regular cleaning will ensure safe operation and
extend the lifespan of the device.
Caution! Do not clean the device with any chemicals, alkali,
abrasive, or disinfecting agents, as they may damage the
surface of the device.
Do not immerse in water!
Warning! Turn the device off and leave it to cool down before
cleaning to avoid electric shock or burns.
8.2 Cleaning the device
1. Cleaning must not be performed by
children.
2. Always disconnect the device from the
power source before cleaning.
3. Turn off the device and disconnect the
brush head.
4. Rinse the brush head in running
lukewarm water.
5. Do not wash it in hot water, the
temperature of which is above 80°C!
6. Shake to remove excess water.
7. Do not pull by the brush bristles.
8. It is recommended to change the brush
head every two months.
9. Rinse the device body with running
lukewarm water.
10. Do not wash it in hot water – the water
temperature should not exceed 40°C.
11. Do not scratch or scrub it to avoid
damage to the rubber gasket, which
provides water tightness.
12. Never immerse the whole device in
water.
13. Wipe dry and put back on the charging
base or in a safe place.
14. Prior to connecting for charging, make
sure that the device is completely dry.

The device does not contain any user-serviceable parts. Do
not attempt to repair the device on your own. Always have a
specialist perform repairs.
The charging base power cord is not replaceable. If the power
cord becomes damaged, do not attempt to repair it, but replace
the charging base with a new one instead. Remember to
replace the charging base with an original one to avoid hazard.
All the packaging materials are 100% recyclable and are
labelled as such. The packaging should be disposed of in
accordance with local regulations.
Keep the packaging materials out of children’s reach, as these
materials can pose a hazard.
Correct disposal of the appliance:
1. Pursuant to WEEE Directive 2012/19/EU, the
crossed-out wheelie bin symbol (shown on the
side) is used to label all electric and electronic
devices requiring segregation.
2. Do not dispose of the spent product with
domestic waste: dispose of it at an electric
and electronic devices collection and recycling
point. The crossed-out wheelie bin symbol
placed on the product, instruction manual, or
packaging communicates this requirement.
3. The plastics contained in the device can
marking. Thanks to recycling, re-use of
materials, or other forms of utilizing used
to the protection of our natural environment.
9 REPAIR
10 STORAGE AND TRANSPORT
It is recommended that the product be stored and transported
in its original packaging.
Always keep the device in a dry, well-ventilated location
inaccessible to children.
Protect the device against vibration and shock during
transport.
11 DISPOSAL

This device has been designed, manufactured, and marketed
in compliance with the requirements of the New Approach
Directives, therefore, the product has been marked with the CE
mark, and a declaration of conformity has been issued for it,
which is made available to market regulators.
1. The Warrantor of this product grants a 6 months
warranty valid from the date of purchase. If any defect is
found, a complaint about the product should be lodged at
the point of purchase.
2. A defective/damaged product is a product failing to
provide the features described in the operation manual
due to intrinsic properties of the device.
3.
device to the Customer Service Point at a given store in
order to submit a complaint about the equipment. When
asserting your rights under warranty, you need to present
the proof of purchase (purchase receipt, invoice) together
with an as-detailed-as-possible description of the defect,
in particular of the external manifestations of the defect.
4. The warranty excludes products with physical damage
other than that caused by the manufacturer or
from incorrect usage or force majeure.
5. The warranty does not cover products from which the
tamper-proof seal has been removed, and products to
have been made or attempted.
6. The warranty does not cover components subject to
13 WARRANTY
12 CE DECLARATION
4. Information on electric and electronic devices
collection locations is available from local
government agencies or from the dealer.
5. Spent or fully discharged disposable and
rechargeable batteries must be discarded
in dedicated labelled bins, turned over to
hazardous waste collectors, or returned to
electric equipment dealers.

natural wear and tear during operation.
7. It is recommended that the complete product be
submitted together with the complaint so as to facilitate
service operations.
8. This warranty for the sold consumer product does not
exclude, restrict, or suspend any rights of the Buyer
stemming from warranty regulations for defects in
goods sold pursuant to the Civil Code of 23 April 1964
(Journal of Laws Dz.U.2014.121).
9. Register for warranty service
In order to submit a complaint about the product,
submit the amazon.com MOPIKO flagship store
Should you have any questions or issues related to
product operation or complaint submission, send them
to the following e-mail address:
•
•
Your opinion is important to us. Evaluate our product at:
https://www.amazon.com/MOPIKO
BEBEAUTY (HANGZHOU) TECHNOLOGY CO., LTD.
Room 606, Building 1, No.768 Jianghong Road,
Binjiang District, Hangzhou, Zhejiang
Made in China
Email: [e-mail]
URL: https://www.amazon.com/MOPIKO