MOR FRONT Desk User manual

FRONT Desk
by Pedro Sottomayor

FRONT Desk
ABOUT
FRONT desk is a stylish desk for home or office, designed by Pedro Sottomayor. The clean look is achieved by
using the drawers almost hided, and as a part of the desk’s structure. The FRONT desk is available in ash, oak
and walnut.
CARE AND MAINTENANCE
The following care instructions are recommendations only.
MOR seals its veneers with a high-quality finish. For this reason, to clean solid wood and veneered surfaces,
we recommend using a soft, slightly damp cloth, with a mild detergent in the case of stubborn dirt. We
recommend that you always use environmentally friendly cleaning products and care for your furniture
regularly and frequently. Before using any cleaning product, you should test it on an inconspicuous spot.
Please follow the cleaning product manufacturer’s instructions and contact a professional cleaning company
in case of stubborn dirt or stains.
To avoid stains and other damage, liquids should be wiped away immediately. Wet surfaces should be dried
immediately with a cloth. To extend the life of our products we apply a natural varnish to highlight and protect
the properties of the natural wood. However, wood furniture reacts to environment. Exposure to light can alter
its colour and also adapt its own moisture content levels to that of its environment. In the case of excessive
fluctuations in temperature and humidity, however, it reacts by cracking and warping.
WARNING
Do not use neat, harsh, strong or abrasive cleaning fluids or furniture polish containing silicone or abrasives.
They most commonly contain unsuitable solvents and/or colour additives, which ultimately leave a coating
that is very difficult to remove and may affect the colour and finish of the veneer surface. If possible, avoid
rubbing the surface while cleaning it, as this will make matte finishes shiny and charge the varnish with static
electricity which will attract more dust.
WHAT DOES THIS BOX CONTAIN?
Inside this box you will find two sets of legs, the table top structure and the necessary components to
assemble everything: screws, a hex key and a spanner.
x2
x6 x1 x1

1. With the table top facing down, start by looking at which legs should be on which side, simply by seeing
the screw holes. Then, move the drawers away from the table top.
1. ASSEMBLY INSTRUCTIONS
2. Connect each leg structure to the table top. 3. Using the provided hex key and six screws,
fix the legs structures to the table top.

5. Turn the desk 180º to its final standing position. You may now place the four drawers in
the table top structure.
Lx factory Rua Rodrigues Faria 103, loja 0.06A, 1300-501 Lisboa, Portugal [phone] [email protected] mordesign.com
A
A
4. Although the desk should be already well structured, we advise to fasten the two M8 screws using the
spanner. This will provide more stability to the whole desk and will make the table top sturdier.