MOR MIGO User manual

MIGO
by Daniel Schofield

MIGO Table
ABOUT
Minimal in its components, MIGO table consists of two parts: a table top, and a conical shaped base, whose
top ends with a strap for it to be lifted by.
The soft and friendly shape of the top makes the table suitable for different situations, and supports the
versatility and practicality it aims to fulfil. That may be a bedside table for a book, space for cups and small
plates for an afternoon with friends, a place for a coffee and some cake, or for a child using the living room as
a playground. The name “MIGO” is an abbreviation of “amigo” commonly used to call a friend in Portugal,
where MOR is based.
CARE AND MAINTENANCE
The following care instructions are recommendations only.
MOR seals its veneers with a high-quality finish. For this reason, to clean solid wood and veneered surfaces,
we recommend using a soft, slightly damp cloth, with a mild detergent in the case of stubborn dirt. We
recommend that you always use environmentally friendly cleaning products and care for your furniture
regularly and frequently. Before using any cleaning product, you should test it on an inconspicuous spot.
Please follow the cleaning product manufacturer’s instructions and contact a professional cleaning company
in case of stubborn dirt or stains.
To avoid stains and other damage, liquids should be wiped away immediately. Wet surfaces should be dried
immediately with a cloth. To extend the life of our products we apply a natural varnish to highlight and protect
the properties of the natural wood. However, wood furniture reacts to environment. Exposure to light can alter
its colour and also adapt its own moisture content levels to that of its environment. In the case of excessive
fluctuations in temperature and humidity, however, it reacts by cracking and warping.
WARNING
Do not use neat, harsh, strong or abrasive cleaning fluids or furniture polish containing silicone or abrasives.
They most commonly contain unsuitable solvents and/or colour additives, which ultimately leave a coating
that is very difficult to remove and may affect the colour and finish of the veneer surface. If possible, avoid
rubbing the surface while cleaning it, as this will make matte finishes shiny and charge the varnish with static
electricity which will attract more dust.
Lx factory Rua Rodrigues Faria 103, loja 0.06A, 1300-501 Lisboa, Portugal [phone] [email protected] mordesign.com