More Inseego 5G Wi-Fi M2000 User manual
more.com.au 2
Inseego 5G Wi-Fi M2000 Quick Start Guide
contents:
Get to Know Your Inseego 5G Wi-Fi M2000 ...........................................................................................................................3
Setting Up Your Inseego 5G Wi-Fi M2000 ..............................................................................................................................4
Connect Devices to Your Inseego 5G Wi-Fi M2000 ............................................................................................................6
Charging Your Inseego 5G Wi-Fi M2000 .................................................................................................................................6
Restoring Factory Settings of Your Inseego 5G Wi-Fi M2000 ........................................................................................8
Need support? ..................................................................................................................................................................................8
more.com.au 3
Inseego 5G Wi-Fi M2000 Quick Start Guide
Top view of the device
get to know your
Inseego 5G Wi-Fi M2000
Touch Screen
LED Light
Light will blink slowly
when device is on
Display Icon Description
No Icons The M2000 is powered o or not receiving power, or the screen is in
power-saving mode.
Home Home.
Network Signal Strength Network Signal Strength Indicator. More bars indicates more signal strength.
Activity Indicator Data is moving between the mobile network and the M2000.
Roaming Indicates Roaming.
Messages You have unread messages.
Wi-Fi The M2000 Wi-Fi network is on.
Connected Devices Displays the number of Wi-Fi devices connected to your M2000.
Information Tap to view information (on Home screen tap to view Wi-Fi network names and
passwords).
Multiple Screens Indicates you can swipe left/right to view more screens.
Battery Charged Battery is fully charged.
Battery Needs Charge Battery is critically low and the M2000 will shut down unless the battery is
connected to the charger.
Battery AC Charging The M2000 is connected to the AC charger and charging.
Battery USB Charging The M2000 is connected via USB and charging a connected device.
No SIM No SIM is detected.
Locked SIM SIM card is locked. The real-time data usage meter will not display.
SIM Error SIM card error. Check that your SIM card is properly installed.
USB Tethered Device is connected to the M2000 via USB.
more.com.au 4
Inseego 5G Wi-Fi M2000 Quick Start Guide
Side view of the device
Power Button
USB-C Port
Connect to the Quick Charge charger or
tether to a device with the USB-C port
seing up your
Inseego 5G Wi-Fi M2000
Step 1:Insert the SIM Card into your
Inseego 5G Wi-Fi M2000
1. Insert a ngernail at the edge of the battery cover to lift and remove the battery cover.
2. Remove the battery from the battery well.
more.com.au 5
Inseego 5G Wi-Fi M2000 Quick Start Guide
Note:
• This device supports only Nano SIM cards
• The SIM card MUST remain in the SIM card slot
when in use. Should your SIM card be lost or
damaged, contact your network operator.
Standard Micro Nano
3. Hold the SIM card with the gold-coloured contact points facing down.
4. Push down and hold the tab with the icon and slide the SIM card into the slot.
a) Push tab down
b) Slide SIM out of slot
Slot Tab
Step 2: Turn on your Inseego 5G Wi-Fi M2000
To turn on your M2000, press and hold the power button for three seconds and the Home screen will appear
on the touchscreen interface.
Step 3: Connect your Inseego 5G Wi-Fi M2000 to Wi-Fi
Tap Wi-Fi Name/Password on the Home screen. The name and password for your M2000 network is displayed.
Swipe left to see the credentials for the guest network.
Note: The default Admin password is the same as the primary network’s default. To change either password,
sign in to the M2000 Admin website.
more.com.au 6
Inseego 5G Wi-Fi M2000 Quick Start Guide
connect devices to your
Inseego 5G Wi-Fi M2000
charging your
Inseego 5G Wi-Fi M2000
Step 1:Insert the SIM Card into your
Inseego 5G Wi-Fi M2000
Your M2000 has two Wi-Fi networks, primary and guests, which lets you connect up to 30 Wi-Fi capable
devices. For added security, share your guest network instead of your primary network. The guest network is
o by default. You can turn it on from either the M2000 touchscreen or the Admin website.
1. Turn on the device you want to connect. The M2000 will broadcast its own wireless network and name.
2. On the device, open the list of available Wi-Fi networks. Select the M2000 primary or guest network and
enter the password. Once connected to the Internet, the Inseego 5G Wi-Fi M2000 Home screen displays
the connected device.
Note: You can view or change the M2000 settings on the M2000 touchscreen or by connecting to the Admin
Web user interface from the primary network at http://my.mi or http://192.168.1.1.
Charging with Quick Charge Charger
Your M2000 has two Wi-Fi networks, primary and guest, and lets you connect up to 30 Wi-Fi capable devices.
For added security, share your guest network instead of your primary network. The guest network is o by
default. You can turn it on from either the M2000 touchscreen or the Admin website.
more.com.au 7
Inseego 5G Wi-Fi M2000 Quick Start Guide
1. Connect the USB-C end of the USB cable into the charging port of the M2000.
2. Connect the other end of the USB cable into the Quick Charge charger and then plug the charger into an
appropriate electrical outlet.
Charging with USB
You can also charge your M2000 from another device, such as a computer, with USB.
To charge the battery with USB:
1. Connect the USB-C end of the USB cable into the charging port of the M2000.
2. Connect the USB-A end of the USB cable into another device, such as a laptop.
3. On the USB Connection Options that will appear on the touchscreen, select Charge the M2000
and tap OK.
more.com.au 8
Inseego 5G Wi-Fi M2000 Quick Start Guide
restoring the factory
seings on your
Inseego 5G Wi-Fi M2000
If you need to reset your device to factory settings, this can be done from:
The M2000 Reset Button
1. Insert a ngernail at the edge of the battery cover to lift and remove the battery cover. Set the cover aside. The
master RESET button is in a small hole located on the bottom of the M2000, underneath the battery cover.
2. Place one end of an unfolded paper clip into the RESET button hole and press until the screen displays M2000
Resetting (about ve to six seconds). Your M2000 will restart with factory settings.
The M2000 Touch Screen
On the touchscreen, tap Menu > Settings > Factory Reset.
Note: These reset options may be disallowed from the Admin Web UI (Settings > Preferences > Device Preferences).
Reset Hole
For a more comprehensive user guide, you can view the Inseego User Guide here.
Alternatively, for Customer Service and troubleshooting, contact our team on 1800 733 368
need support?
Table of contents
Other More Wireless Router manuals
